Thanks for the update on Marlin v1.0.0b1.
[13:13:16] Load file : /Users/alx/Desktop/arduipilot 2/1.gcode
[13:13:17] /Users/alx/Desktop/arduipilot 2/1.stl
[13:13:17] Got name Default
[13:13:17] Parsed object name[Default] facets 52
[13:13:17] Could not load machine 'Ultimaker v1.0 (EXPERIMENTAL Sprinter firmware)' no machineNode found
[13:13:17] Unable to connect to machine!
[13:13:17] Please select your machine from the menu under Machine -> Driver.
[13:13:17] could not load machine 'Ultimaker v1.0 (EXPERIMENTAL Sprinter firmware)' please check Driver-> <Machine Name>
[13:13:57] Loading simulator.
[13:13:57] Loading driver: replicatorg.drivers.reprap.RepRap5DDriver
[13:13:57] Connecting to machine using serial port: /dev/tty.usbmodemfd121
[13:13:57] Initializing Serial.
[13:13:57] Attempting to reset Ultimaker (pulsing RTS)
[13:13:57] echo:1.0.0 beta 1
[13:13:57] Supports RC
[13:13:58] echo:free memory:echo:1.0.0 beta 1
[13:13:58] echo:free memory:5371
[13:13:58] echo:using default settings:
[13:13:58] echo:steps per unit:
[13:13:58] echo: m92 x78.74 y78.74 z533.00 e836.00
[13:13:58] echo:maximum feedrates (mm/s):
[13:13:58] echo: m203 x8.33 y8.33 z0.08 e3333.33
[13:13:58] echo:maximum acceleration (mm/s2):
[13:13:58] echo: m201 x9000 y9000 z100 e10000
[13:13:58] echo:acceleration: s=acceleration, t=retract acceleration
[13:13:58] echo: m204 s3000.00 t7000.00
[13:13:58] echo:advanced variables: s=min feedrate (mm/s), t=min travel feedrate (mm/s), b=minimum segment time (ms), x=maximum xy jerk (mm/s), z=maximum z jerk (mm/s)
[13:13:58] echo: m205 s0.00 t0.00 b20000 x0.50 z0.01
[13:13:58] echo:pid settings:
[13:13:58] echo: m301 p22.20 i0.12 d990.00
[13:14:01] Ultimaker not responding to gcode. Failed to connect.
[13:14:01] Supports RC
I've tried with newly release replicatorg 0026_alpha2, with the same issue.
I've change the Configuration.h in Marlin firmware to have a baudrate of 115200 instead of 250000 (how do you use 250000 baudrate replicatorg? I suppose you use Printrun?).