shreaker / openxcp Goto Github PK

Hi,
Trying to run this on Ubuntu, and qtcreator 6.0.2 throws errors requesting cpp files as the implementation match is not there for QtCSV::StringData and QtCSV::Write. Looks like you have also modified it from the general qtcsv implementation, so would appreciate those files to test some XCP on my end.

Also, does this base work where I can connect a Linux PC to a Vector VX to perform XCP over Ethernet? (PC Master and VX slave). Any thoughts on how to do that is appreciated too.

Sounds good.
Seeing a segmentation fault in small_vector.hh when performing the push_back at line 167. This is creating issues at the ELF parser level.
In expr.cc, line 42:

stack.reserve(arguments.size());
for (const taddr *elt = arguments.end() - 1;
        elt >= arguments.begin(); elt--)
    stack.push_back(*elt); // <- The value of elt is 0xfffffffffffffff8, which means the loop should be auto, despite which the seg fault occurs.

Which uses small_vector.hh's:

    void push_back(const T& x)
    {
            reserve(size() + 1);
            new (end) T(x);
            end++;
    }

How can I fix this and can anyone provide an ELF file they have tested with?
Thanks.

User
This is the log I am seeing for my XCP DAQ. After this, the XCPEvent throws the XCPError:ERR_OUT_OF_RANGE. Why?

"SENT CMD" "255" "FF 00"
"RESP." "CONNECT" "FF 3D 80 FF FA 00 01 01"
"CMD" "GET_STATUS" "FD"
"SENT CMD" "253" "FD"
"RESP." "GET_STATUS" "FF 20 00 FF 00 00"
"CMD" "FREE_DAQ" "D6"
"CMD" "ALLOC_DAQ" "D5 00 01 00"
"CMD" "ALLOC_ODT" "D4 00 00 00 01"
"CMD" "ALLOC_ODT_ENTRY" "D3 00 00 00 00 01"
"CMD" "SET_DAQ_PTR" "E2 00 00 00 00 00"
"CMD" "WRITE_DAQ" "E1 FF 00 00 28 6A 80 50"
"CMD" "SET_DAQ_LIST_MODE" "E0 00 00 00 01 00 01 00"
"CMD" "START_STOP_DAQ_LIST" "DE 02 00 00"
"CMD" "XCP_START_STOP_SYNCH" "DD 01"
"SENT CMD" "214" "D6"
"RESP. CMD: D6" "Payload: " "FF"
"SENT CMD" "213" "D5 00 01 00"
"RESP. CMD: D5" "Payload: " "FF"
"SENT CMD" "212" "D4 00 00 00 01"
"RESP. CMD: D4" "Payload: " "FF"
"SENT CMD" "211" "D3 00 00 00 00 01"
"RESP. CMD: D3" "Payload: " "FF"
"SENT CMD" "226" "E2 00 00 00 00 00"
"RESP. CMD: E2" "Payload: " "FF"
"SENT CMD" "225" "E1 FF 00 00 28 6A 80 50"
"SENT CMD" "224" "E0 00 00 00 01 00 01 00"
"RESP. CMD: E0" "Payload: " "FF"
"SENT CMD" "222" "DE 02 00 00"
"RESP. CMD: DE" "Payload: " "FF 00"
"SENT CMD" "221" "DD 01"
"RESP. CMD: DD" "Payload: " "FF"

Very nice Thesis and implenentation. Helped me a lot to better understand how the ethernet communication with Aurix works. I am a student and also trying to implement XCP on an Aurix TC277 but I got some questions regarding the slave implementation:

1. In ipStackAurix.c you used header files:
   #include "Ifx_Lwip.h"
   #include <Tft/conio_tft.h>
   #include "HM_Config.h"
   But I could not find those files anywhere online. Could you please provide those header files too?

2. I noticed that the ipStackAurix.h is not used anywhere in the provided files. Does it have to be implemented somewhere? I am just wondering if you used only the files you provided on github or also some additional files.

Hello Michael ,
I would like to use XCP BASIC Driver to make some measurement , the Hardware that i had is Pcan and and IC5700 ,
the software : Winidea , pcanviewer ,
As first step , the connection and other commands work perfectly when i send it in the Pcan viewer , but when i want to configure the DAQ "Dynamic Configuration" i found a problem in the phase of Start_stop_synch DD 01 ,
i use a standrad CAN Not CAN FD .

please can you give me some advices ?

Best Regards ,
Bechir .