Valetudo RE offer Pre-Defined zones. about valetudo_vacuum_camera HOT 3 CLOSED

We get the data from the v1.4.9 added topic destinations.

2023-11-05 15:57:18.204 INFO (MainThread) [custom_components.valetudo_vacuum_camera.valetudo.connector] valetudo/rockrobo_s5: Received vacuum destinations..{"spots":[],"zones":[{"name":"test zone","coordinates":[[24000,24000,25706,24717,1]]}],"rooms":[{"name":"bath room","id":17},{"name":"Bed Room","id":20},{"name":"entrance","id":16},{"name":"Kitchen","id":19},{"name":"living room","id":18}],"updated":1699196237802} from MQTT

I would be therefore possible to send to the card this zones, I guess to update this topic within the next week.

from valetudo_vacuum_camera.

Just as update: it was possible to create the attribute listing the predefined zone, but actually it needed to confirm if the card can get the attribute to generate the required template, in contact with @PiotrMachowski will update whenever it is possible or not to get those values in the card automatically.

from valetudo_vacuum_camera.

Okay.. we got confirmation that the card at this time do not support the auto configuration of the pre-defined-zones, the attribute zones will be anyhow implemented on the new release v1.5.0, with also the pre-defined-go_to (spot cleaning) destination.

from valetudo_vacuum_camera.