Invalid Calibration Error with any version above 1.5.7.1 about valetudo_vacuum_camera HOT 7 CLOSED

I will standby ready to test 1.5.8 for you when it is ready. Thanks for your continued work on this project, it is really useful

from valetudo_vacuum_camera.

@duffmiester if you would be so kind to do me the favour to test the last commit 6e98dba
Simply re-download the "main" form the version's that HACS propose, as there are no updates (I'm still working on the new version), the v1.5.7.1 is still available on HACS. The modifications done till now should address the issue you kindly raised.

• No check of the memory.
• Review of the CPU counters done.
• Some little / minor refactoring of the code was done on the image_handler too (and the memory usage is going down).
  Tested till now with both the vacuums I have, this should be already working for you.
  If all it's okay please star the project and and just a tong up on this means we are on the right way.

Of course, if you have time for that, then tanks in advance for the cooperation, and soon V1.5.8 will be release.

from valetudo_vacuum_camera.

Have tested with 'main' and it is working now.

Thanks for the quick response!

from valetudo_vacuum_camera.

@duffmiester v1.5.8 is now available, hope you will enjoy it at your disposal for any future requirements or ideas.

from valetudo_vacuum_camera.

@duffmiester I think I will disable this.. it was just an attempt to understand an issue reported in a discussion but eventually this is creating a lot of issue (the strange thing is that without this "memory limit check" it should work) I also noticed since 2024.2.1 there are other more important issue to care of (the CPU of core is reading our CPU calculation apparently probably a call to to PSUTIL too much.).
I really apologise for this.. I will work now on the v1.5.8 and revert those changes (or make them available optionally).
and thanks.. I don't why but receiving "warning" from you.. feels good (Edit: it helps me to focus on this development with a different mindset).

from valetudo_vacuum_camera.

@duffmiester I fixed also the invalid calibration error, apparently on V1.5.8, the MQTT data available (also when the vacuum isn't connected) was creating the handler to return none therefore the camera attributes didn't got the last available data in mqtt.. if the vacuum do not move, well is because it isn't connected so locating the vacuum will help to know it, but the camera will always startup when there are data in MQTT. ;)

from valetudo_vacuum_camera.

Installed 1.5.8 and seems to be working fine so far. Thanks as always for the help :-)

from valetudo_vacuum_camera.