Hi!

I have an issue with gmenu and pymenu:

gmenu: prg files wont show up (game.prg)
pymenu: prg files show up, but when started, vice wont show up. Just blacxk screen and back to the directory.

vice directly runs fine. i can select and start the prg from within vice

Gambatte port does not support GBC games

Hello!
When I updated my LDK to RetroFW v2.2 I tried to play the " Oddworld: Abe's Exoddus ". Unfortunately, when you press the "select + L" (the equivalent of L2) and the "blue button"( the equivalent of X) nothing is happening
(I mean that I press "select: + L + blue button" nothing is happening).
That's a pity because all the other button combinations work great!
I hope somehow you can fix it.
Thank you very much for your hard work!

I would like that this were like cfw Rogue (at least include battery indicator), i think everybody has forgot this console (rs-100 https://www.dhresource.com/600x600/f2/albu/g7/M00/4F/5F/rBVaSVu_S6iAJoGmAABDH-fQSzc901.jpg)

Hello,

I have an issue with UAE4all on retrofw 2.0 ; my device is able to boot the amiga but I can't access the files browser to load disk images. I don't know if it's because the home directory is now on the external card. Thank you for your help

I know that retrofw expands to occupy all the storage, but I can't put games anywhere. The only way that works was putting the roms in a external SD, but, when I want to safe in any emulator says something like "There's no directory founded". If someone can help me is gonna make a big favor. ¡Thanks!

I remember that it didn't used to be supported ...

But now I don't even see it mentioned anywhere :|

Will any of the firmware types work with it ?

LDK (Square) carried out Oswan
Unable Open the menu Store
Requesting for help
Thank you

The screen is flickering while emulator is running. The emulator isnt well ported, needs proper converting to the correct resolution.

handheld console: RS-97 Plus, 2nd anniversary version with IPS panel.
fw version: 2.0
FBA version: downloaded here, opk file.
issue: cannot play any game including cps1, cps2 and others.

I have the rg-plus v2, no matter what firmware you install, none works. As much blank screen.
On the board it says rg_plus_v1.0, ips screen

Flashing it to the card gives me a blank screen. The version for the RG-300 V3 IPS here works fine (I know the site looks sketchy, but it's what is officially recommended by retrogame). The version it works with is the RG-300 V3 IPS.

I'm running on Linux, and basically what I've done is this (with /dev/sdh being my card):

$ sh RG-300_bright_screen.bat
$ sudo dd if=RetroFW.img of=/dev/sdh

I flashed my Retro Game 300 with RetroFW 2.1 yesterday and I found what ever which date I set, it will flash back to 2020-02-14 23:00

Whenever I flash the image to my 32GB SD card, it "shrinks" the sd card so that there's only 630MB of free space left. What am I doing wrong?

facepalm

Never mind.

the suspend function does not work, this worked fine in version 1.x with the button that was dedicated.

I have also seen that the screen flickers when the boot logo comes out and the screen flickers on emulators such as GPSP.

Getting a white screen for the following versions: 2.0, 2.1, 2.2 for RS-97 v2.0. Used type 2A image. Seems like it boots up and creates the partitions and directories, but nothing shows up. No boot/splash screen, just a white screen. Screen flashes once or two upon initial boot up after flashing the image file. Brightness control works. Tried multiple mSD cards. Original firmware works with the card I flashed.

Hello,is it possible to put in the next firmware version for LDK Game Vertical version the TV-OUT feature back?

thanks

Put Game Genie rom to ~/.fceux and rename it to gg.rom.
And enable Game Genie from FCEUX main menu.
But not working.

Does gPSP you recommend in emulators come with fast forward option?
I have tried all of the keys on my opendingux retromimi device but nothing seems to be working.

Cheers

It's a Unibios using problem.

I tried to flash these RetroFW versions on my RG-300 V1.3 2019.6.3
RetroFW 2.1 Type 2B -> Stuck on boot logo
RetroFW 2.1 Type 3B -> White screen
RetroFW 2.2 Type 2A -> Black Screen
RetroFW 2.2 Type 2B -> Stuck on boot logo, after some time appears screen about partitioning, reboots but stuck on boot logo
RetroFW 2.2 Type 3B -> White screen
Do i have to open the console to check which screen module is installed to know which RetroFW works?
I noticed another issue has been created about this console #20 it has been closed as invalid but idk what does invalid means since no RetroFW works apparently on this model.

rfw simpleMenu freezes on boot screen after exiting menu. I tried several solutions but the only thing possible was to reset data from the recovery.

I can't import tkinter in the terminal after updating 2.2 I get the following error message "sintax error import error there is no module called tkinter" or something like that

Hi!
simplemenu doesnt seem to work (anymore?)
neither the beta not the normal opk seem to run

the .simplemenu is created.

PyMenu is currently using its own copy of scandir to list files and directories. Its much faster than the default listing and was integrated in later python versions (>3.5)

As scandir is an official module, it could/should be included in the rootfs to be more compatible.

The sunset rider rom is not runing properly.can you guys fix this please?? Retrofw 2.2 was a excellent update..very very thank you guys for everything..

Was the MPLAYER App removed from this version? I just recently got it to work in trhe previous RFW version and when I updated to this latest version I see it is not included,

Any way to get the app back?

In release 2.0, there are 2 tables in the release notes, and RS-97 v2.0 (Retro Game v2.0) is wrongly listed in the 1st table as being compatible with Type 2A; where the second table lists it correctly as compatible with Type 1A.

Unfortunately all subsequent release notes only includes the 1st table with the error and it took me a while to figure out when flashing it on my RS-97 v2.0 and had to do a little investigation myself.

I've tried several different versions but can't get it to boot on my RG 300 v1.3 (version number displayed right next to the internal SD card slot.

I've tried

2B - Black screen, nothing at all
3B - White screen
5B - White screen

I guess I don't have IPS in this 1.3 version as I have also tried the official IPS version and that doesn't work (just a white screen as with 3B and 5B above). Just the official RG 300 V2 firmware is working for me at the moment. I've opened it up and can't see anything to suggest what screen it does have in it.

Does anyone know where I can find this firmware " LDK_Landscape_RetroFW_V1.2_Comic-book_05-08-19.img.7z "?
Thank you!

The linux kernel came with RetroFW is 2.6.31.3. I cannot find source code & configs for this.
P.S. is there any working port of 3.x or 4.x to RS97 & LDK?

I've been playing around with RetroFW 2.0 for the last couple days and notice that if I let my RG300 with IPS screen go to sleep that it often will not wake up properly.

Sometimes the screen just stays black (but backlight is on), sometimes it will come back on with varying levels of brightness (sometimes super dark/dim and other times with blown out blacks), and sometimes the screen comes back on like normal but lightly flickers. These issues may resolve themselves after a minute or so but there are times I need to reboot the system to fix it. Launching a game and quitting back to the GUI will often get the screen back to normal as well.

Would be nice to have :)

Description: the right shoulder button increases brightness but the left shoulder button doesn't lower it.

FW Version: 2B
Screen: replacement "sony" screen

Steps to reproduce:

1. While in GMenu, press the brightness button
2. Once the brightness bar shows up, press the right shoulder button. Brightness will go up.
3. Press the left shoulder button
4. Brightness stays the same

If headphones are plugged in the newly compiled 2.3 version of retrofw - after the NTSC and PAL prompt - the CPU clock is throtteled down to 528 regardless of clock frequency setting.= by user

This happens even if you turn the gmenunx prompt off

[edit]
delete this topic pls

thx for the new cfw witch supports rs-07, the retro arcade mini. however, as it doesn't have a click.power button, it cannot trigger ingame menu，or system combo key. will u please manage to resolve that? thank you.

Hello, excuse my English, I acquired the rs97 version 3.0 console, LCD_LKY030A01, I installed retrofw several versions, 2.0,2.1,2.2 until I changed the sd card. My problem is that when I am in an emulator for nes, megadrive, gba, after about 10 a 15 min approx the game freezes up to moments the OS is restarted.
it could be that it is the console or the slot of the internal sd that works badly?

The WIP has been compiled by blackz and he has done some more awesome things behind the scenes, but me and blackz do not have authority to edit the page.

Can we at least get that while you are on hiatus?

hello,
is there a way to have an history played games list?

Hello is the LDK Game (square) and the Retro Game 300 IPS support the TV-OUT connection with the latest RetroFW 2.2 firmware??

Thanks

hello,
since end of last year retrofw supports the rs07, so is it an option to support aiwo g1000?
this device is not followed by the manufacturer and the actual cfw is not as easy to install as retrofw and is not as functionnal as retrofw.
this machine is great but the software is not fully painstaking.
Someone know if it is possible to support it?
thx

LDK runs pcsx4all
R2 key invalid

like this , rg300，ips 2.8''. The game save files and sdlpal.dge are in the attached zip file
sdlpal_rg300.zip

can someone port sdlpal for retrofw2.2 again without this bug？

@pingflood , there are still a handful of things for which the source code is not released like recovery menu and I think the gmenunx binary.

I would like to request that they are released even if they are WIP zip, as long as we can fix the buildroot so that make can create an image.

Some time ago, steward appeared without warning on the RetroFW discord server and uploaded a clone of various Game&Watch games. Since then, I haven’t heard of any updates being made to it, so I figure it might as well be added to the software list as-is. Here’s a like for reference: https://cdn.discordapp.com/attachments/591959465419603998/703053861685821550/gamewatch_retrofw_20200313_0.opk

There are several broken links in the readme, including the vfat patch, the starter pack, and the install guide.

Hi everyone,

Today when switching on my LDK Horizontal device I noticed it was displaying black dots on the screen, even when entering a game it still showed the dots, could this be a problem with the device itself? Uploaded a couple of pictures (hopefully they did) to show my problem.

Thanks 👍

I face a error when i type make to compile toolchain.

OS: CentOS Linux release 7.6.1810 (Core)
LSB Version: :core-4.1-amd64:core-4.1-noarch
BuildRoot Version: buildroot-2018.02.9

make[2]: 进入目录“/root/retroFW-workspace/buildroot-2018.02.9/output/build/host-gcc-initial-6.4.0/build/gcc”
build/genattrtab ../../gcc/common.md ../../gcc/config/mips/mips.md insn-conditions.md \
        -Atmp-attrtab.c -Dtmp-dfatab.c -Ltmp-latencytab.c
build/genautomata ../../gcc/common.md ../../gcc/config/mips/mips.md \
  insn-conditions.md > tmp-automata.c
make[2]: *** [s-attrtab] 已杀死
make[2]: *** 正在等待未完成的任务....
/bin/sh: 行 1: 14574 已杀死               build/genautomata ../../gcc/common.md ../../gcc/config/mips/mips.md insn-conditions.md > tmp-automata.c
make[2]: *** [s-automata] 错误 137
make[2]: 离开目录“/root/retroFW-workspace/buildroot-2018.02.9/output/build/host-gcc-initial-6.4.0/build/gcc”
make[1]: *** [all-gcc] 错误 2
make[1]: 离开目录“/root/retroFW-workspace/buildroot-2018.02.9/output/build/host-gcc-initial-6.4.0/build”
make: *** [/root/retroFW-workspace/buildroot-2018.02.9/output/build/host-gcc-initial-6.4.0/.stamp_built] 错误 2

Thank for the good job.
Have any emus can play java game for rs-97?
Sorry for my poor English.