proficnc / the-cube Goto Github PK

The RN801A/B/C/D1M component using in the PSM_components.SchDoc does not refer to an actual component when googled. I believe it is a resistor, but another symbol is used for the resistor throughout the schematic, so the component is ambiguous.

Hello,
It would be nice to mention the part number / have a more descriptive name for the MOSFET-DUAL-PCHANNEL-CHIPFET's used in the PSM_components.SchDoc. Like the current/voltage specs.

Thanks!

Describe the bug
I recently got my hands on two Cube which both had issues with safety button acting up, analysis of the problem revealed that both of them had the IO pin for the safety (PB5 on IOMCU) shorted to ground on the MCU i.e. the drive circuit on the MCU itself was burnt.

Analysis of the schematic revealed that the pin used is not 5V tolerant (as per ST datasheet) and it is directly wired to the GPS1 port on the carrier (with 1k5 pulldown). Both the supplied safety button wire and (as far as I see) the HERE GPS connects the safety signal directly to 5V rail which causes excessive current thru the CPU which in long term will cause the pin to malfunction.

The easiest solution would be to add a 820R resistor in series to act as a voltage divider.

The LTC4417 is displayed as the LTC4117 on the PSM_components.SchDoc; which is incorrect.

Hi,
Your project is really awesome, but is it possible to add the Altium Project of the last REV of the Carrier Board, I have the REV E in my hand, I don't know if it's the last one, but that could be incredible to see the schematics.

Maybe the project is already somewhere on Internet, but I can't find it thanks for your help.