penk / ruha.camera Goto Github PK

I was wondering if the 2.2" tft was supposed to be a touchscreen. If not, would it be possible to add touchscreen capabilities to be able to change camera settings on the go? I understand that this is a DIY camera, more of a "proof-of-concept" than anything else, but I just feel like having the ability to change some of the basic camera settings in the camera would be cool.

Hi,

What kind of power switch and shutter button are they? Just trying to make sure my grocery list is the same.

I took a 2.2 "TFT display as recommended and connected it, but a problem emerged.
Display Link (https://www.amazon.de/gp/product/B01E0MGZU2/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1)

In a blog it was shown how it can be connected to the Raspberry Pi and in the linked Github project this was also discussed again. But I have a problem that wasn't described there. After starting the script, the image can only be seen in the upper right part of the display, greatly reduced. Unfortunately, the autostart script does not work properly either. I have to run the script to add it to the autostart after every reboot. In addition, the displayed image flickers as if the frame rate is incorrect.
The Blog(in German)(https://blog.gc2.at/post/spi-tft-lcd-kernel5/)
the GitHubProjekt(english)(https://github.com/juj/fbcp-ili9341)

I very much hope that a solution can be found and that everything works out. Many thanks in advance.

Hello team,
Could you please explain how to connect the USB cable to this cam?
Also could you please specify which USB board to be used for assembly?

Please see the attached image.

https://imgur.com/a/tDgMTU4

Could you please provide a recommended battery?

I think the BOM should specify the Pi Zero WH (wireless + header) or specify that you have to solder on the header if you have a Pi Zero W.

This would allow easier modification e.g. for a different button or screen.

I think the STEP-format is quite compatible, but this could be a first step to open up further development. I would love to share some of my modifications of existing STL-files, but i am sadly sometimes limited to do just that.

I have this display: http://amazon.com/dp/B01CZL6QIQ
However, I have difficulties in making it work.

Could you please share which driver you have used?
Any link to the steps much appreciated.
@penk

Most displays I've found are 2.8"

Also, are some of these parts like the top glued together? The mount looks like it has structure for screws that line up with the main body but, there aren't guide holes.

Should the py code be set to run automatically on boot? But how do you send the photos？Thanks

How much memory does the Rapi need ? I am thinking to buy a new one for rapi 4b