pavel-demin / eclypse-z7-notes Goto Github PK

Hello,

I wanted to say that this repo is awesome and has really helped me a lot to understand SDR and such. I am currently having an issue since your recent release. When I assign the board with an IP address that all goes through but when I navigate to the IP in a web browser and go to the SDR transceiver section of the webpage it loses the IP address. I am able to ping the IP of the board before I enter the transceiver program but after the host is unreachable. I am not sure if it is an error in my configuration on my end or if it is something that is closing the connection when I enter and start the program on the board. This wasn't happening in your previous releases. Any help you have would be greatly appreciated. Thank you again for the repo and the hard work you are putting into this project.

Hello,

I am currently attempting to expand your repo to incorporate the second ADC on the eclypse board. My issue lies in how you compiled the C code to generate the sdr-transceiver file the is in your SD card image files. I tried to use a cross compiler but had no luck. Additionally I tried to build and run the code in Vitis to no avail. If you could provide what you used to compile your code and generate your sdr-transceiver file that would be great.

Hi Pavel,

I am glad to see that you ported your building system to the Eclypse-z7, I really like it.
However, I have problems to get the led_blinker to run:

I tried the img you provide for downloading and also the img i build myself (after updating line 6 in alpine.sh to tools_tar=apk-tools-static-2.10.8-r0.apk, since the old one was not available anymore)

Both times nothing happens to the RGB leds after writing the bit file to the FPGA.
With my limited experience I am already out of ideas how to debug this issue further.
I hope you can provide me a solution or with further debugging instructions/ideas.

BR
Alex