kieronquinn / gear360_oss Goto Github PK

Just downloaded new firmware for R210 (SMR210GLU0AQC6)
link:
https://drive.google.com/file/d/161W5dT8w3didFc3khIrzvU5-mhQV29-c/view?usp=sharing
Can you compile it or can leave instructions how to do it?

Seems stuff no longer is available at Samsung's servers, but the link to the XDA forum is still relevant, as it got me the firmware file.
Your instruction for the updater.sh was also to the point and consistent with bankwing.
However, updater.sh would not run.

After some looking around and reading all sorts, I found this:
https://github.com/ottokiksmaler/gear360_modding
So I copied those files to the SD-card, connected to the camera with wifi, telnetted into it and started the updater.sh from there.

Hello,

I found that the simple instruction to add the firmware ("*.bin") plus the "updater.sh" script in the SD card root does not work on my Gear 360 (2016). This instruction in the README is simply incomplete. "updater.sh" seems to be never executed.

Here is how I was able to do it:

1. Add the additional two files "info.tg" and "updater.adj" in the SD card root directory, see attached ZIP file.
2. Insert the SD card to the camera and power on.
3. Wait and see the upgrade progress until the camera finally turns off by itself (3-5 minutes for me).
4. Move the SD card back to your computer.
5. Cross check: the "*.bin" file should already have disappeared from the SD card's root directory.
6. Delete the "updater.sh", as well as the "info.tg" and "updater.adj".
7. Reinsert the SD card into the camera, power up and enjoy the new firmware.

Please note: I have already changed the filename in the "updater.sh" to the last available firmware version for the Gear 360 (2016), which is "C200GLU0AQK1_171121_1257_REV00_user.bin".

It would be nice, if the manual could get updated, so that other Gear 360 (2016) users are not so frustrated.
Thanks and best greetings!
FW-updater.zip