kasmetski / auto-hard-reset Goto Github PK

Hi, congrats for the all the info and work on this project.

For start only have one relay the simple Songle srd-05vdc-sl-c
and my question is how to connect it to Raspberry:
should it be ok

on entrance
0v to -
5v to +
Gpio 7 do signal
ON exit
should i connect to NO or NC the reset switch of the psu

best regards

@Kasmetski Thanks for creating this.

Would you provide more info on which pins to connect from the relay to the motherboard?

Looks like a high-level connection would be like this:

RasberryPi -> 5v Relay --> mobo (which pins from the relay and which pins on the mobo)?

Thanks in advance!

In the image on your readme, which output of the relay would you connect to the mobo? loving this project and setting it up currently! Just don't want to break anything.

When connected, it will turn off the miner, but it refuses to turn it back on. There seems to be no switch back to power on.

Initial state is only red led on. Then it switches (off) and both LEDs red and green stay on.

Raspberry Pi B+ (arm6 installed)
5v relay

each relay have 3 outputs, you should connect to the left and the center one (when they are front of you) on mobo connect on two pins where you connect the turn on button

Is there a specific version of go needed? Having issues using go build *.go