Comments (63)
😍
So good to see this in real!
y_rod_holder will be fixed in priority
from prusa_i3_bear_upgrade.
look at my side printing to see it's a bit misaligned or Z wobling you have a tip
from prusa_i3_bear_upgrade.
Did you re-calibrate the printer (calibrate xyz)? Did you check your live Z level again?
from prusa_i3_bear_upgrade.
yes, lined XYZ I did not re-align Z axis again
from prusa_i3_bear_upgrade.
This might comes from the y_rod_holder too. Let's fix this first.
from prusa_i3_bear_upgrade.
Ok
from prusa_i3_bear_upgrade.
This looks great. Congrats!
from prusa_i3_bear_upgrade.
Thanks
from prusa_i3_bear_upgrade.
New rod_holder available :)
from prusa_i3_bear_upgrade.
from prusa_i3_bear_upgrade.
yip yip :)
Do you speak Italian? I understand a little bit so you can write in italian and I will answer in english. (my mother tongue is french and I understand a very little bit of german as well)
from prusa_i3_bear_upgrade.
Ciao si sono italiano
from prusa_i3_bear_upgrade.
Ho visto che hai modificato rod holder oggi stampare e proverò
from prusa_i3_bear_upgrade.
I have seen the "quasar vetri" in your picture ;)
Nice. Do you have another spool of orange? 😁
from prusa_i3_bear_upgrade.
Siii bello ho finito ultima bobbina ,,😯😩
from prusa_i3_bear_upgrade.
from prusa_i3_bear_upgrade.
In case of I am using MF-PETG Neon Orange from extrudr.eu which is very very close to Prusa orange.
https://extrudr.eu/collections/petg/products/extrudr-mf-petg-neon-orange
from prusa_i3_bear_upgrade.
Si Colere molto vicino a Prusa
from prusa_i3_bear_upgrade.
I have added feet. For now, they have same shape than MK2(s), like this you can reuse your (home made) dampers
from prusa_i3_bear_upgrade.
I finished first build yesterday, the black corner on aluminum plate makes the build very hard to square/tight. After several tests on how we can square them correctly I have decided to remove them. Did you use them? Rigidity does not seems to be affected...
from prusa_i3_bear_upgrade.
from prusa_i3_bear_upgrade.
ciao ordinato MF-PETG Neon Orange e stampato tutto cosa ti riferisci black corner on aluminum plate yes
come nel tuo progetto la parte del motore installati in basso e la parte anteriore cioe lcd installati in alto per non avere problemi con il carrello si bloccava
from prusa_i3_bear_upgrade.
Hello ordered MF-PETG Neon Orange and printed everything you say black corner on aluminum plate yes
as in your project the part of the engine installed at the bottom and the front ie lcd installed up to not have problems with the car locked
from prusa_i3_bear_upgrade.
Ok thank you, I will still remove them, easier and cheaper and does not impact rigidity.
For MF-PETG Neon Orange I print at 225°C and 80°C for bed. Fan I am still testing but at 30-50 for now...
from prusa_i3_bear_upgrade.
MF-PETG 240 for bed 90 is perfect linear
from prusa_i3_bear_upgrade.
Manufacturer datasheet is 240 bed 90
from prusa_i3_bear_upgrade.
Where did you get the datasheet, on their website it is 205 and 80? https://extrudr.eu/collections/petg/products/extrudr-mf-petg-neon-orange
from prusa_i3_bear_upgrade.
https://www.3djake.it/extrudr/filamento-mf-petg-neon-arancione
from prusa_i3_bear_upgrade.
Cosa sono queste righe più grande durante la stampa ? I puoi aiutare
from prusa_i3_bear_upgrade.
from prusa_i3_bear_upgrade.
Thanks for the link, interesting!
This is due to the fact it is doing parts of the line, then go somewhere else and then finish the started ones. Then you have this joining line. I do not know how to solve it but some things you can check :
- layer height
- extruder calibration (over extrusion?)
- extruder temp?
from prusa_i3_bear_upgrade.
from prusa_i3_bear_upgrade.
Sweet build! In case of I updated the lcd supports to avoid colliding to with rod holders.
Do you still have the wobbling from the previous version?
from prusa_i3_bear_upgrade.
from prusa_i3_bear_upgrade.
from prusa_i3_bear_upgrade.
Cool! Do you find it sturdier? Do you see a difference in print quality?
from prusa_i3_bear_upgrade.
si molta differenza no wobbling qualità superiore
from prusa_i3_bear_upgrade.
ci sono un po di peli
from prusa_i3_bear_upgrade.
This is due to the filament, you can remove them using a hair gun :
https://www.youtube.com/watch?v=uqUcrIsSHak
You can also play with retraction but I never tried
from prusa_i3_bear_upgrade.
You can try to reduce temp a bit as well, I am at 225°C
from prusa_i3_bear_upgrade.
print 205
from prusa_i3_bear_upgrade.
from prusa_i3_bear_upgrade.
It does not look to be a wobbling issue to me.
- If the part is brittle, then you should increase temp and print slower
- Clogged nozzle?
- Does the temperature variate during the print?
- Filament is getting stock or tangled
from prusa_i3_bear_upgrade.
prusa3d/Prusa-Firmware#75 (comment)
Sebastianv650/Prusa-Firmware/tree/MK2_Community_Mod
Very very good
from prusa_i3_bear_upgrade.
So good, I have to update my firmware!
from prusa_i3_bear_upgrade.
https://github.com/prusa3d/Prusa-Firmware/releases/tag/v3.1.0-RC2
Read
from prusa_i3_bear_upgrade.
from prusa_i3_bear_upgrade.
Yep I read it and just finished to upgrade my firmware, let's go to calibrate the K value! Very nice new feature!
from prusa_i3_bear_upgrade.
Is very very faster print
from prusa_i3_bear_upgrade.
Ciao mi servirebbe se possibile un grande favore non sono capace a disegnare e creare un file stl per ABS e Mi servirebbe urgentemente una modifica sul file originale Prusa mk2s asse X end e motor adatti per cuscinetti igus 15 mm ho un grande problema ti allego la foto grazie
from prusa_i3_bear_upgrade.
Could you describe your problem?
from prusa_i3_bear_upgrade.
Guarda la foto il cuscinetto si muove scende nella parte interna
Look at the photo the bearing moves down to the inside
from prusa_i3_bear_upgrade.
create file in abs and petg
from prusa_i3_bear_upgrade.
I would be very grateful if you could create the abs file and pet parts original X end axis, and the engine part
from prusa_i3_bear_upgrade.
I do not thing it is a big deal if the bearing are going a bit inside. For now I do not have lots of time, I would like to finish the bear upgrade first to start a new one.
What you can simply do is this :
- Download MK2s scad files from here https://www.prusa3d.com/prusa-i3-printable-parts/
- Install OpenScad
- Open bearing.scad and reduce bearing_diameter value by 0.1 o 0.05mm (top of the file) and save
- Open x-end-idler.scad, then hit F6, then File -> Export -> STL
- Open x-end-motor.scad, then hit F6, then File -> Export -> STL
from prusa_i3_bear_upgrade.
New project ?
from prusa_i3_bear_upgrade.
Vorrei investire sto cercando di fare qualcosa di grosso cerco persone per investire denaro in nuovi progetti aprire una fabbrica io sono un costruttore di case ma ho sempre fatto elettronica vorrei investire miei soldi in qualcosa di grande
from prusa_i3_bear_upgrade.
Spero che il tuo nuovo progetto usare componenti di alta qualità e tecnica superiore per pezzi
from prusa_i3_bear_upgrade.
Quanti anni hai ?
from prusa_i3_bear_upgrade.
Could you contact me via my website here : https://www.ekunn.com/ -> contact
from prusa_i3_bear_upgrade.
help I have a height problem of carriage Y extruder slams in the pot how can I change the end of the stroke find the new zero point? I modified bearings with double bearing under the carriage Y but increased height thanks
from prusa_i3_bear_upgrade.
appassionato di droni ?
from prusa_i3_bear_upgrade.
Mio drone DJI Spark modified firmware adesso può andare a 2 km o 4 km
from prusa_i3_bear_upgrade.
Related Issues (20)
- optional LCD cover does not fit the lcd supports (version 2.1) HOT 4
- 2.0 Frame clarification and print Bed question HOT 1
- Will there be a single-armed bear for prusa mini? HOT 3
- BearMera, will there be support for the Trianglelab Matrix/Lite? HOT 1
- Update to MK3S+ Y Rod Holder HOT 3
- LCD frame HOT 1
- MK3 Y carriage with endstop switch HOT 10
- Corrupted images in manuals
- Suggestion: 10mm Ø Steel Rods HOT 4
- Failing XYZ Cal HOT 2
- LCD Encoder Direction
- Prusa bear
- Xyz calibration HOT 21
- MK3S+ with Bear frame 2.1 calibration failed HOT 1
- Y 9mm idler thensioner for Powge
- Kit build mk3s HOT 2
- how to apply MK4 upgrade on Bear 2.1 HOT 239
- Nexquito | Nextruder Mosquito hotend HOT 1
- MK4 carriage on MK3S bearing holder HOT 7
- Tune/change filament from LCD-menu causes misalignment HOT 9
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from prusa_i3_bear_upgrade.