eclsnowman / eustathios-spider-v2 Goto Github PK

HI Eric,

When I opened this assembly up this model was missing from the repository.

C:\Users\ronij\Documents\3D printing\Herculien-Solidworks\molex_microfit_female_containment.SLDPRT

Thanks,
Jeff Kes

I just tried assembling the Z-axis leadscrew support with the tensioner idler. Its really hard to get the locking nylon nut into place and tight since they're hard to hold with needle nose pliers and the hole for the nut is too small to fit a standard socket driver into. In the end I drilled it out with a 12mm drill bit to make it large enough to fit the socket driver into.

I'd suggest widening the hole for that nut to something like 12mm minimum to allow for drivers to get in there easily. Possibly this could also apply to the other nut holes on these mounts.

is there a price quote for the BOM? the second page looks like it, since quanity doesnt add up.

corexy seems to be the best way of moving the x/y axis. Are there plans to modify this design to work with that?