Tensioner nut hole needs to be larger about eustathios-spider-v2 HOT 2 OPEN

Odd. I was able to fit the socket on mine. I must have a socket with
thinner walls. I will look into it tonight.
On Mar 23, 2015 12:01 PM, "Ben Delarre" [email protected] wrote:

I just tried assembling the Z-axis leadscrew support with the tensioner
idler. Its really hard to get the locking nylon nut into place and tight
since they're hard to hold with needle nose pliers and the hole for the nut
is too small to fit a standard socket driver into. In the end I drilled it
out with a 12mm drill bit to make it large enough to fit the socket driver
into.

I'd suggest widening the hole for that nut to something like 12mm minimum
to allow for drivers to get in there easily. Possibly this could also apply
to the other nut holes on these mounts.

—
Reply to this email directly or view it on GitHub
#2.

from eustathios-spider-v2.

Its really really close, so its probably small deviations in socket manufacturer I guess.

Looking great though, just need my extrusion to arrive!

from eustathios-spider-v2.