cant connect to UUID about elkbledom HOT 4 CLOSED

Connection successful
[be:59:7a:00:08:d5][LE]> primary
attr handle: 0x0001, end grp handle: 0x0003 uuid: 00001800-0000-1000-8000-00805f9b34fb
attr handle: 0x0004, end grp handle: 0x0009 uuid: 0000fff0-0000-1000-8000-00805f9b34fb
[be:59:7a:00:08:d5][LE]> Characteristics
handle: 0x0002, char properties: 0x12, char value handle: 0x0003, uuid: 00002a00-0000-1000-8000-00805f9b34fb
handle: 0x0005, char properties: 0x10, char value handle: 0x0006, uuid: 0000fff4-0000-1000-8000-00805f9b34fb
handle: 0x0008, char properties: 0x06, char value handle: 0x0009, uuid: 0000fff3-0000-1000-8000-00805f9b34fb

This is my uuid info, I think it is the same led strip, try to put strip and raspberry pi together, i think you have distance problem.

Try and put the results

from elkbledom.

Dont know if the problem is that i'm not using a Pi, using a generic x86-64, in fact when I try to use gatttool I get

gatttool -I
command not found: gatttool

from elkbledom.

I think your problem is only you need to install it.

https://command-not-found.com/gatttool

Try and post

from elkbledom.

Hi, I managed to use it, the integration is perfect, the problem was:

Couldn’t install bluez since i was on a nuc with HA OS directly on the SSD.
Made the migration to a HA supervised so I could install packages.
Had problems finding the Driver for bluetooth/wifi but managed to find a solution.

After that the integration worked as expected
Thanks for your guide

from elkbledom.