A 3D Printable Retro-style Raspberry Pi HQ Camera
- Raspberry Pi Zero WH + microSD card
- Raspberry Pi HQ Camera
- 16mm 10MP Telephoto Lens
- 2.2" TFT Display
- TP4056 Micro USB Battery Charger
- MT3608 DC-DC Step Up Boost Module
- 2000mAh Li-Pi battery
- Power switch
- Shutter button
- Dupont jumper wires
- 3D printed case (see STL folder)
- Leather patches for couch (optional)
- Power from converter connects to Pi's
5V
(pin 4) andGND
(pin 6) - Shutter button connects to
GPIO26
(pin 37) andGND
(pin 39)
![]() |
![]() |
---|
Raspberry Pi pins | TFT display |
---|---|
3v3 (pin 17) | VCC |
GND (pin 20) | GND |
GPIO8 (pin 24) | CS |
GPIO23 (pin 16) | RESET |
GPIO24 (pin 18) | DC |
GPIO10 (pin 19) | MOSI |
GPIO11 (pin 23) | SCK |
GPIO18 (pin 12) | LED |
GPIO9 (pin 21) | MISO |
![]() |
![]() |
---|---|
![]() |
![]() |
Flash Raspberry Pi OS to micro SD card. Then add following lines into config.txt
:
gpu_mem=256
dtoverlay=rpi-display
display_rotate=2
For application, simply execute this script after boot:
from gpiozero import Button
from picamera import PiCamera
import time
button = Button(26)
with PiCamera() as camera:
camera.resolution = (4056, 3040)
camera.framerate = 5
frame = int(time.time())
camera.start_preview()
while True:
button.wait_for_press()
camera.capture('/home/pi/Pictures/%03d.jpg' % frame)
frame += 1
Copyright (c) 2021 Ruha Cheng & Penk Chen. All rights reserved.
All files are licensed under MIT license, see the LICENSE for more information.