behzad-mozaffari / prtg-addons Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/prtg-addons
Automatically exported from code.google.com/p/prtg-addons
What steps will reproduce the problem?
1. Install Media Streamer on Windows 2008 SP2 Enterprise (64bit)
2. Try polling 5-10 streams together, it stops responding.
What is the expected output? What do you see instead?
It should queue and respond request one by one incase it is not able to handle
request all together.
What version of the product are you using? On what operating system?
I am using PRTG Network Monitor 8.4.2.2381
Windows 2008 SP2 Enterprise (64bit) running on Xeon Processor + 16 GB RAM and 1
TB Drive
I am also wondering, what this folder stores?
C:\PRTG Tools Family\PTF.MediaStream
Original issue reported on code.google.com by [email protected]
on 16 Feb 2012 at 4:11
Hello,
I just downloaded PRTG Media Streamer, product looks great and works fine for
with Windows Media Streaming but I think it may not be working for rtmp. Though
server was down but RTMP streams where reporting no issues and showing playing
status.
What steps will reproduce the problem?
1. Install Wowza Server
2. Install PRTG Media Streamer
3. Add sample stream (rtmp://[serverIP]/vod/mp4:sample.mp4 and try test with
Media Streamer, it will return playing status even after you take wowza down.
What is the expected output? What do you see instead?
Should show actual status with error message if any.
What version of the product are you using? On what operating system?
Windows 2008 SP2 x64 / PRTG Media Streamer / PRTG 8
Thanks,
Sunil
Original issue reported on code.google.com by [email protected]
on 12 Feb 2012 at 7:43
What steps will reproduce the problem?
1. Run PRTG report on 1 month and results are different
2. Run billing tool for 1 month and transfered GB are different
Result: You will lose money using the billing tool as less then consumed is
charged.
What is the expected output? What do you see instead?
I executed a PTRG report as a test for billing giving 564 GB of transfered
data, total volume, based on SNMP 1 minute on a server example.
Then I passed the same sensor on the billing tools. The result is 522 GB
transfered.
This can be because of this:
The PRTG reports is executed with 1 minute interval. The billing tool only
allows 5 minutes intervals.
But actually the real issue seems to be that PRTG reports for the same data
will include the 1 first day of the next month.
This means 11/1/2011 to 12/1/2011
The billing tool doest. It has a bug. The result in the report for the same
date range with the billing tools is:
11/1/2011 to 11/30/2011
Its misses one day. Also, I think the billing tools is not taking hours account
12:00 AM, etc so for allot of transfered bandwidth this is quite a big loss if
you happen to use the billing tool.
In my test just with that amount of data and based on 1$ per GB extra you would
lose 42 GB or 42$ by using the billing tool.
The difference between running PRTG reports and the billing tools should be the
same. Because if you happen to send the reports to the clients they will differ
with the billing tool.
Original issue reported on code.google.com by [email protected]
on 24 Dec 2011 at 10:08
What steps will reproduce the problem?
1. Ran the below command on a Windows 7 PC in same LAN as PRTG server after
upgrade to version 13.1.2.1463 and get the below error:
csvexport -pu=<removed> -pp=<removed> -ps=https://nms.nexusmgmt.com -ssl3
-sd=2013-02-01-00-00-00 -ed=2013-02-28-23-59-00 -to=300 -fc="Ping
Time,Minimum,Maximum,Coverage%" -s=9117
Processing sensor 9117
Retreiving sensor historic data
Exporting to CSV
Index was outside the bounds of the array.
What is the expected output? What do you see instead?
Expected to see Completed Successfully.
What version of the product are you using? On what operating system?
This was not happening until we upgraded PRTG to version 13.1.2.1463. The
version of PFT CSVExport is 12.3.3.4.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 12 Mar 2013 at 6:50
TLDomainExpiration -d=cinnaminsonnj.org will return "String was not recognized
as a valid DateTime."
TLDomainExpiration -d=cinnaminson.com will return "-139:The domain registration
expires in -139 days."
What version of the product are you using? On what operating system?
12.2.1 on Windows Server 2003 R2
Original issue reported on code.google.com by [email protected]
on 17 Aug 2012 at 1:00
What steps will reproduce the problem?
1.Download PTF Tweet plug-in
2.Extract EXE to required directory, register exe with twitter
3.Configure Plugin within PRTG Web interface
What is the expected output? What do you see instead?
When PRTG sends a command to an application via command prompt it does not
allow for spaces within the command parameter.
IE when running the above command from command line you run the following
tweet.exe -a=twitter_username -t=[%sitename] %device %name %status %down
(%message)
When PRTG runs the command its running the following
tweet.exe-a=twitter_username -t=[%sitename] %device %name %status %down
(%message)
Note there is no space between tweet.exe and the parameters being passed
What version of the product are you using? On what operating system?
PRTG 8
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 29 Sep 2010 at 3:34
What steps will reproduce the problem?
1. Run the CSV Export tool with following parameters:
csvexport -pu=**** -pp=**** -ps=https://****
-s=14646,14591,14595,14832,14697,14700,14701,14253,14254,14255
-sd=2013-07-30-00-00-00 -ed=2013-07-31-00-00-00 -av=86400 -co
-f="C:\Temp\CSV\report"
WHERE
each sensor ID represents a Sensor factory (combination of 3 SNMP sensors #Free
Disk Space, #Used Disk Space and #Total Disk Space) for every disk (on all our
servers)
What is the expected output? What do you see instead?
Expected: A CSV file with a column for each drive letter it encounters. Blanco
field in the "Disk Space (C:)" column if f.e. sensor with ID 14697 refers to a
disk with driver letter H: (should add it under column "Disk Space (H:)"
What I see: CSV Export adds all the values under columns with the first drive
letter it encounters (see attached file)
What version of the product are you using? On what operating system?
CSV Export 13.2.1.12 on Windows 7
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 5 Aug 2013 at 1:42
Attachments:
I made a new configuration, to see if the printers are running well but
I'm getting the following error:
0:Impersonation of \admin failed! [1326] Anmeldung fehlgeschlagen. unbekannter
Benutzername oder falsches Kennwort.
I can't find the error or where I should insert name and password.
I'm using the german vision.
TThanks
Carlos
Original issue reported on code.google.com by [email protected]
on 2 Aug 2011 at 2:03
What steps will reproduce the problem?
1. Tried this stream http://waym.wayfm.com/streams/waym_low.pls The player
times out though
2. I can open the stream inside the VLC player with no trouble
3. I tried upping the time out to 100seconds still trouble
What is the expected output? What do you see instead?
Anything
What version of the product are you using? On what operating system?
Latest 8.0.8 Windows 7
Please provide any additional information below.
It would be nice to have some steps for troubleshooting.
Original issue reported on code.google.com by [email protected]
on 5 Apr 2012 at 3:38
Hi,
I have configured TLDomainExpiration custom sensor BUT unable to get output. I
can see message "//www.sho.is and enter your domain name once". I have also
tried the same BUT not getting any result from sensor and status is showing
down. I am using PRTG Network Monitor 14.1.9.1645 with dot NET framework 4.0. I
am able to execute the same from command prompt. I have copied sensor
"TLDomainExpiration.exe" in "\PRTG Network Monitor\Custom Sensors\EXE" path.
Pls. let me know, how do i resolve this issue.
Thanks,
Urvang Vakharia
Original issue reported on code.google.com by [email protected]
on 9 May 2014 at 1:46
What steps will reproduce the problem?
1. We run the script to export data to CSV:
c:
cd "C:\Program Files (x86)\PRTG Network Monitor\Custom Sensors\EXE"
csvexportv13.1.2 -pu=[username] -pp=[password] -ps=[serveur]
-s=4323,9881,4337,7926,8860,8725,9830,9835,9861 -av=3600
-sd=2013-03-01-00-00-00 -ed=2013-03-31-23-59-00
-f="C:\Users\Public\Documents\PRTG Exported Data" -co -nh
2.
And after 5 sensors being exported we have the following error:
Processing sensor 8725
Retrieving sensor historic data
Load limit exceeded
Press any key to continue
What is the expected output? What do you see instead?
I was expecting this instead:
Processing sensor 8725
Retrieving sensor historic data
Exporting to CSV
Waiting 6 seconds to prevent PRTG's overload protection from kicking in
What version of the product are you using? On what operating system?
PRTG Network Monitor 13.1.2.1448 on Windows 2008 SP2
Please provide any additional information below.
Could you please help me with this error?
Many thanks,
Seb
Original issue reported on code.google.com by [email protected]
on 29 Apr 2013 at 11:40
Attachments:
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Media Streamer 8.0.1
Please provide any additional information below.
Giving error that Media Streamer has stopped working Check online for solution
and Close the program.
Regards,
Yogesh Patel
Original issue reported on code.google.com by [email protected]
on 20 Feb 2012 at 7:12
PTF-EventlogReader 9.0.4, Eventtype-parameter do not work as expected
I created serveral logentries with warning/error/information-type in the
applicationlog. then i fired following commands and got following outputs:
1.
EventlogReader.exe -e=APPLICATION -s=BACKUP
-> 0:No matching entry found for the last 1440 minutes
-> WRONG ! THERE ARE ERROR AND INFORMATIONAL-MESSAGES WHICH MATCH (see step 2-4)
2.
EventlogReader.exe -e=APPLICATION -s=BACKUP -t=1
->517:21.06.2012 20.01.31 Backup started at '2155348301' failed with following
error code '%%2155348301' (%3). Please rerun backup once issue is resolved.(3)
-> OK !
3.
EventlogReader.exe -e=APPLICATION -s=BACKUP -t=4
-> 611:22.06.2012 11.13.14 A scheduled backup has been configured for this
computer.(4)
-> CORRECT !
4.
EventlogReader.exe -e=APPLICATION -s=BACKUP -t=5
-> 0:No matching entry found for the last 1440 minutes
-> WRONG ! - Should be all error and warning-messages (4+1)
tested on:
W2k8R2(english), XP pro(german)
Original issue reported on code.google.com by [email protected]
on 22 Jun 2012 at 1:39
Hallo,
leider schaffe ich es nicht mit dem Sensor LastWinUpdate den Updatestatus
abzufragen. Ich habe jetzt diverse Server und PC probiert, keiner liefert mir
ein Ergebnis zurück.
Bei korrektem Passwort kommt dieser Fehler:
0:Der Dienst Remote Registry wurde nicht auf dem Computer tobit-server gefunden.
Bei bewusst falschem Passwort der hier:
0:Impersonation of ta-logistic\administrator failed! [1326] Anmeldung
fehlgeschlagen. unbekannter Benutzername oder falsches Kennwort.
Der Dienst Remoteregistrierung ist gestartet, mit regedit klappt der Zugriff
z.B. problemlos. Es hat bisher weder mit dem alten Sensor für PRTGv7 noch mit
dem neuen für die 8er Version funktioniert.
Gruß,
Jens Burmeister
Original issue reported on code.google.com by [email protected]
on 23 Sep 2010 at 3:43
Fixed typo
Original issue reported on code.google.com by [email protected]
on 4 May 2013 at 11:50
Attachments:
What steps will reproduce the problem?
1.Installing media streamer
2.Unistalling Media Streamer
3.
What is the expected output? What do you see instead?
Install/Unistall without giving any error.
What version of the product are you using? On what operating system?
Media Streamer 8.0.1
Please provide any additional information below.
System Detail
OS:- windows server 2008 R2
Processor:- Intel Core 2 Quad @ 2.66 GHz
RAM:- 2 GB
Thanks,
Yogesh Patel
Original issue reported on code.google.com by [email protected]
on 20 Feb 2012 at 7:09
What steps will reproduce the problem?
1. start traynotifier
2. set focus to random window
3. when traynotifier refreshes, focus is lost on the previously focused window
4. when traynotifier is exited, normality is restored
What is the expected output? What do you see instead?
Traynotifier to refresh without stealing focus
What version of the product are you using? On what operating system?
PRTG Network Monitor 8.1.1.1696 on Windows Server 2003 Std. SP2
Traynotifier 8.0.1.1 on Windows XP Prof. SP3
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 4 Nov 2010 at 10:41
I am trying to use the PRObject executable to pause/un-pause sensors for the
command line. I keep receiving the error "The operation has timed out".
An example of the command:
PRObject.exe -u=https://prtg.mydomain.com -un=myusername -pw=mypassword
-id=40273 -a=p
I have tried the -u parameter with the same exact format as is used to connect
in a browser window. Any variation below is successful when browsing, but not
successful with PRObject.
prtg.mydomain.com
https://prtg.mydomain.com
https://prtg.mydomain.com/index.htm
Original issue reported on code.google.com by [email protected]
on 19 Mar 2013 at 8:31
What steps will reproduce the problem?
1. Create a custom sensor in PRTG, set sensor to run Ducksboard.exe.
2) Sensor returns Execution Time channel, not the channel requested
Here's the command being run manually:
.\Ducksboard.exe -url=xxx:80 -u=xxx -p=xxx -id=2803 -ch=requests -key=xxx
-sl=xxx
Requesting sensor data from PRTG.
Data received from PRTG.
Channel value = 920
Sending to Ducksboard {"value": 920, "timestamp": 13615350451}
Receiving from Ducksboard <response>ok</response>
920:Ok
See attached screenshot for channel list of Sensor ID 2803.
What is the expected output? What do you see instead?
I expected to see channel 'requests' returned.
What version of the product are you using? On what operating system?
Windows 2003 Server
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 22 Feb 2013 at 12:21
Attachments:
What steps will reproduce the problem?
1.Connect TrayNotifier to PRTG Server
2.After SAVE the settings I get it could not create SSL / TLS secure channel
3.
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
window 7
Please provide any additional information below.
At the same time I installed PTF.NotifierGadget. And it works with my settings.
Unfortunately, the PTF.TrayNotifier can not connect with the settings.
Does anyone have experience with PTF.TrayNotifier?
Original issue reported on code.google.com by [email protected]
on 26 Oct 2011 at 2:10
What steps will reproduce the problem?
1. I downloaded the PTF ContactState zip file, extracted the files, and moved
the .exe file (black icon, described as "PTF sensor") into the "Custom
Sensors/EXE" folder under the PRTG Network Monitor program folder. When that
didn't work on executing step #2 below, I also later tried moving it into the
"Sensor System" folder as well (since that had mostly icons similiar to
ContactState.exe file.
2. I opened up the PRTG program, logged in (Ajax GUI), selected "Add Sensor
Manually".
3. At next screen, I chose "add sensor to an existing device", then chose
"probe device" under "local probe". The next screen gives you the sensors to
choose from.
What is the expected output? What do you see instead?
The list of available sensors populates the screen below (121 of them), but the
one for ContactState does not appear.
What version of the product are you using? On what operating system?
PRTG 9 (latest version, downloaded this week). Windows XP Professional w/ SP3.
I have the required NET2 (as well as 3 & 4) on my computer.
Please provide any additional information below.
Why can't I get this sensor to appear on the list of available sensors on my
PRTG program? What am I doing wrong? What am I not doing right?
Original issue reported on code.google.com by [email protected]
on 3 Mar 2012 at 1:18
What steps will reproduce the problem?
1.TLDomainExpiration.exe -d=sirsidynix.com
What is the expected output? What do you see instead?
Who is shows:
Expiration Date: 23-MAY-2018
So I expect to see: 1857 days... instead I see 30 days.
What version of the product are you using? On what operating system?
TLDomainExpiration 13.1.1
Please provide any additional information below.
This test was done 4/22/13
Original issue reported on code.google.com by [email protected]
on 22 Apr 2013 at 7:16
What steps will reproduce the problem?
1. Run CSVexport
2. Open results
What is the expected output? What do you see instead?
Expect results to include the 'downtime' column, results do not include this
What version of the product are you using? On what operating system?
Using v13.1.2 of csvexport on Windows7
Please provide any additional information below.
Report generated from the web reporting interface has this column, but we are
looking to create some non-standard automated reporting and need this from the
CSVExport tool as well.
Original issue reported on code.google.com by [email protected]
on 3 Apr 2013 at 5:38
What steps will reproduce the problem?
It is not possible to get the versions of PRTG Network Monitor and PTF addons
through a proxy server. The proxy server setting seems not to be used.
What is the expected output? What do you see instead?
0:Unable to connect to the remote server
What version of the product are you using? On what operating system?
PRTG Network Monitor 8
Please provide any additional information below.
Does not work with "CheckPRTGVersion" and "CheckPTFVersion".
Original issue reported on code.google.com by [email protected]
on 14 Feb 2011 at 11:16
What steps will reproduce the problem?
1. Export all columns
1a. Downtime (RAW) present
2. Try to export Downtime (RAW)
2a. No data
What version of the product are you using? On what operating system?
Multiple versions of the CSV export tool
Please provide any additional information below.
Downtime column (as percentage) is available for export, but RAW value is not.
Original issue reported on code.google.com by [email protected]
on 22 May 2013 at 12:32
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.