This is a P8X32A/Propeller, P2X8C4M64P/Propeller 2 driver object for the Nordic Semiconductor nRF24L01+ IC.

IMPORTANT: This software is meant to be used with the spin-standard-library (P8X32A) or p2-spin-standard-library (P2X8C4M64P). Please install the applicable library first before attempting to use this code, otherwise you will be missing several files required to build the project.

• SPI connection at 4MHz (P1), up to 10MHz (P2)
• Supports setting carrier frequency from 2,400MHz to 2,525MHz, or by equiv. channel number
• Set common RF parameters: TX power
• Supports on-air baud rates of 250kbps, 1000kbps, 2000kbps
• Address filtering: 3, 4, 5 bytes address width (for pipes 0, 1 only; pipes 2..5: only the LSByte is changeable)
• Options for increasing transmission robustness: CRC calculation/checking (1 or 2 byte length)
• Packet radio options: arbitrary payload lengths (1..32), dynamic payload length
• Carrier-detect
• FIFO: Read RX/TX states (empty, full, data ready, data sent), flush
• Optional auto acknowledgement function (aka Enhanced ShockBurst (TM) NORDIC Semiconductor), auto-retransmit count, auto-retransmit delay, max number of retries
• Selectively enable pipes (0..5), with some settings changeable on a per-pipe basis (payload length, address, address width)
• Interrupts based on any combination of: New RX data ready, data transmitted, max number of retransmits reached (driver doesn't directly support the IRQ pin - only reading/clearing the interrupt state register)
• Packet stats: Lost packet count, retransmitted packet count
• Power on/off
• RF Testing modes: Force PLL lock, CW mode

P1/SPIN1:

• spin-standard-library
• P1: 1 additional core/cog, for the PASM SPI engine

P2/SPIN2:

• p2-spin-standard-library

(other versions or toolchains not listed are not supported, and may or may not work)

• P2/SPIN2: MOSI and MISO I/O pins must be within 3 pins of SCK
• API not yet stable
• RSSI method is only an alias for RPD(), which returns a receive power detect/carrier-detect flag. For wireless.transceiver API compatibility only