zyphlar / open_access_control_ethernet Goto Github PK

View Code? Open in Web Editor NEW

16.0 16.0 10.0 321 KB

Arduino Ethernet code for 23b's Open Access Control system

C++ 17.50% Arduino 82.50%

open_access_control_ethernet's People

Contributors

Stargazers

Watchers

Forkers

heatsynclabs uberschnitzel uid0 shorttie jdellinger shiposha reeline kcdipesh profjefer suicidesin

open_access_control_ethernet's Issues

Log

Log is too verbose (especially the sensor stuff; checks too often and fills up log buffer) -- we mostly just want to see who got access / denied, and when major config changes take place.

Auth successes are logged as F1 or F2

I think they're supposed to be S instead of F

Door accesses unlock instead of open

Doors should only open momentarily when a valid card is detected.

System Time is not updateable via http

Currently the system time is set in firmware and thus during runtime is not very accurate.

Two operations required for an unlock

Should be optionally combined into one

Automatic locking is causing problems

Currently there's a firmware function for locking at (11pm?) -- because of the system time issue this happens at random times each day; consider allowing this to be changed/disabled, also consider making sure that we are effectively logging each unlock/lock/open operation so we can audit "arrived at 8am and the door was unlocked" issues.

Recommend Projects