zerotier / docs Goto Github PK

https://github.com/zerotier/ZeroTierOne/tree/dev/service

https://docs.zerotier.com/config/#local-configuration-options

are there any practical considerations that would limit bandwidth when using ZeroTier as a gateway in a typical deployment? a certain number of always on devices streaming 100Mbps traffic for example

CPU speed and ISP bandwidth

we need some documentation that explains that because it is true but it's inadequate to help a customer

My Docker command:

docker run --name vps1 -dit --cap-add NET_ADMIN --device /dev/net/tun ubuntu

Zerotier seems to work just fine without the cap.

Within the ZeroTier marketing website, there is currently a link to "Manual" under the Support menu. This link points to a doc entitled “Protocol Design Whitepaper” posted as one of a series of documents on docs.zerotier.com. Hyperlinks in multiple docs also reference to this document as "the Manual". To alleviate the confusion about the document as part of the onboarding experience, the GTM team would like to see the following changes made:

1. Within the marketing website, change "Manual" to "Getting Started" and change the hyperlink to point to the Getting Started document on docs.zerotier.com
2. Either rename the "Protocol Design Whitepaper" document to something like “ZeroTier Design Manual”, or change all references to "Manual" in the other documents to "Design Whitepaper" or something more applicable.

Is it possible to update the Synology instructions so that I can use it as an exit node?

This link refers to a localhost URL and doesn't work when deployed to production.

This should instead point to https://docs.zerotier.com/sso/#keycloak-as-a-saml-identity-broker

docusaurus is out of date and it's making it hard to do stuff.

Right now we serve just a plain nginx 404 page.

• figure out if docusuaurs has a 404 feature
• do something better in nginx if needed

edit:
there is this https://docs.zerotier.com/404.html

Hello, i was researching on the topic, found the docs at https://docs.zerotier.com/exitnode/ and while "enough" weren't acceptable for my usecase, specifically ipv6 routing. I went on to research on history and found.

ecde02a#diff-cf89d22ba248ef2a3963d6c318b323cf49d2a077c100c4598d6e01a564ca7717

While from a nerdy point of view it really butchered it, I can see how it became more accessible to noobies and significantly shortened in scope.
However I'd like to ask for permission from @joseph-henry before going around and reworking it a bit, saving some of the best bits from the original. I would like to comply to contributors guidelines and help create a nice overview of what can it be done.

Please let me know on suggestions and places to improve as I suggest a PR :)
Thanks!

had a couple questions about this recently

zerotier/go-ztcentral#25

it's per Node ID, but not per Network anymore

https://docs.zerotier.com/corporate-firewalls/

palo alto and opnsense section link relatively

yarn run lint

becoming a common question

Hello there! 👋

I'm the maintainer of homelab-svg-assets and would like to add the ZeroTier icon to my project. However, I didn't see any brand guidelines or a vector (SVG) version of the icon. Could you please provide one or both of these?

Thanks, and keep up the good work!

Per their marketing contact, we have been asked to update references of Teltonika to Teltonika Networks

I found a reference here, but not sure where else this text may live. https://docs.zerotier.com/devices/teltonika

Please update all references (since I don't have the permissions to update docs). TY!

fix it

the video is private

The exit node documentation page seems incomplete
https://github.com/zerotier/docs/edit/main/docs/exitnode.md

The Configure your network section just ends with "Central > Network >"

Also, the command sudo iptables-save is part the title of a code block. Should it not be in the code block? That section of code block, tip, code block with a command in the title just looks confusing.

Would be good the instructions covered more exit node OSes. Can an exit node only work on a Linux OS? Or are OPNSense, Windows, Android, etc... compatible as well?

Could use algolia or a self-run thing.

• Try one or two local ones
• use algolia if needed or it's better

https://docusaurus.io/community/resources#search

https://docs.zerotier.com/central-billing

There's a header for it, but the text for unsubscribe is missing

https://docs.zerotier.com/zerotier/microsegmentation, https://docs.zerotier.com/microsegmentation
https://docs.zerotier.com/zerotier/ztintro, https://docs.zerotier.com/zerotier
https://docs.zerotier.com/getting-started/getting-started, https://docs.zerotier.com/
https://docs.zerotier.com/zerotier/manual, https://docs.zerotier.com/protocol
https://docs.zerotier.com/zerotier/moons, https://docs.zerotier.com/roots
https://docs.zerotier.com/zerotier/multipath, https://docs.zerotier.com/multipath
https://docs.zerotier.com/zerotier/rules, https://docs.zerotier.com/rules
https://docs.zerotier.com/zerotier/troubleshooting, https://docs.zerotier.com/faq
https://docs.zerotier.com/zerotier/zerotier.conf, https://docs.zerotier.com/config
https://docs.zerotier.com/central/sso, https://docs.zerotier.com/sso
https://docs.zerotier.com/sockets/tutorial.html, https://docs.zerotier.com/sockets
https://docs.zerotier.com/self-hosting/introduction, https://docs.zerotier.com/selfhost
https://docs.zerotier.com/self-hosting/network-controllers, https://docs.zerotier.com/controller
https://docs.zerotier.com/devices/asustor, https://docs.zerotier.com/asustor
https://docs.zerotier.com/devices/freenas, https://docs.zerotier.com/freenas
https://docs.zerotier.com/devices/mikrotik, https://docs.zerotier.com/mikrotik
https://docs.zerotier.com/devices/openwrt, https://docs.zerotier.com/openwrt
https://docs.zerotier.com/devices/opnsense, https://docs.zerotier.com/opnsense
https://docs.zerotier.com/devices/qnap, https://docs.zerotier.com/qnap
https://docs.zerotier.com/devices/synology, https://docs.zerotier.com/synology
https://docs.zerotier.com/devices/teltonika, https://docs.zerotier.com/teltonika-networks
https://docs.zerotier.com/devices/ubiquiti, https://docs.zerotier.com/ubiquiti
https://docs.zerotier.com/devices/western-digital, https://docs.zerotier.com/wd
https://docs.zerotier.com/terraform/multicloud-quickstart, https://docs.zerotier.com/terraform-multicloud
https://docs.zerotier.com/terraform/quickstart, https://docs.zerotier.com/terraform
https://docs.zerotier.com/packages/snap, https://docs.zerotier.com/snap
https://docs.zerotier.com/zeronsd/quickstart, https://docs.zerotier.com/dns
https://docs.zerotier.com/central/v1, https://docs.zerotier.com/central/v1
https://docs.zerotier.com/service/v1, https://docs.zerotier.com/service/v1

These should go live right after the re-org is published.

@joylarkin if you see anything missing add it to the list but I think this covers all existing pages. If you linked to a specific section on a page like article#section that might be broken since I've simplified section names.

On the security call out box on this page, https://docs.zerotier.com/protocol/#213cryptographyaname2_1_3a
the link is broken.

I looked in the page markdown file and the call out box uses a relative link reference [security] which links to https://docs.zerotier.com/protocol/security and not https://docs.zerotier.com/security

Note: a sales prospect found the broken link and complained about it. (I am submitting this fix before the sales team sees the complaint.)

Please and thank you. :)