Git Product home page Git Product logo

padavan-ng's People

Contributors

0x36 avatar andy9a9 avatar bmork avatar borkmann avatar chenhuacai avatar cotequeiroz avatar cpaasch avatar dhowells avatar dvlasenk avatar ebiggers avatar herbertx avatar hpalacio avatar hreinecke avatar imgbotapp avatar jwischka avatar khseal avatar lijinyue avatar linaro1985 avatar matnyman avatar miracle091 avatar nbd168 avatar neilbrown avatar nicstange avatar oneukum avatar oohal avatar probackup-nl avatar rientjes avatar syzzer avatar ummakynes avatar zanezam avatar

Stargazers

avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar

Watchers

avatar avatar avatar avatar avatar avatar

Forkers

reactor900 xfleet felixoon probackup-nl mahtabctg andy9a9 kenny-chow-my contra404 scottmudge areki-san arkkito

padavan-ng's Issues

Update Mediatek wifi driver

Please add new driver MT7622_7615_SoftAP_5.0.5.1
Hanwckf ( commit: dab37f6df629ac9946cc52bf923f01c8d14da8d0)

busybox CONFIG_ASH_GETOPTS=y instead of not set

Let's Encrypt client acme.sh fails to run correctly because Busybox it's CONFIG_ASH_GETOPTS is not set.

Despite "Automatically generated make config: don't edit" I would edit trunk/configs/boards/busybox.config with:
CONFIG_ASH_GETOPTS=y

...until I find a better spot to make this change permanent.

Default WiFi password after flashing from factory

On an ASUS RT-N56U A1
I flashed from factory and before flashing the WiFi had no password.
After flashing both WiFi networks have a password, my issue here, is that the LAN ports on the router are not working.
This issue with the LAN ports existed prior to flashing. The LAN switch works, meaning if I connect two devices they can talk to each other, but the router interface is not reachable through the LAN ports, nor internet or DHCP is made available. This is something specific to my router's hardware, and not firmware related. WAN port works fine.
I need to know the default Wifi password to access the router. Or if possible access the router thought the WAN port.

Building on debian fails in iptables: configure file is missing

For your information, sudo ./clear_tree.sh && sudo ./build_firmware.sh fails in iptables using a github downloaded zip file, dating Nov 7 2021, on Linux debian 4.9.0-8-686-pae #1 SMP Debian 4.9.110-3+deb9u4 (2018-08-21) i686 GNU/Linux.

Note 1: iptables-x.y.z/configure was there in https://github.com/LESHIY-ODESSA/padavan-ng/blob/master/trunk/user/iptables/iptables-1.4.16.3/configure

Forgotten to check out in git/upload to github?

Last output:
...

make[3]: Entering directory '/opt/padavan-ng-custom/trunk/user/iptables'
cp -f /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions/disabled/libxt_set.* /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions
cp -f /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions/disabled/libxt_SET.* /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions
rm -f /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions/libxt_policy.*
rm -f /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions/libipt_ah.*
rm -f /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions/libip6t_ah.*
rm -f /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions/libxt_esp.*
rm -f /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions/libxt_CLASSIFY.*
rm -f /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions/libxt_IMQ.*
cp -f /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions/disabled/libxt_conntrack.* /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions
cp -f /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions/disabled/libxt_physdev.* /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions
rm -f /opt/padavan-ng-custom/trunk/user/iptables/iptables-1.8.7/extensions/libxt_string.*
( cd iptables-1.8.7 ; \
./configure \
	--prefix= \
	--enable-static \
	--disable-shared \
	--disable-nftables \
	--disable-connlabel \
	--with-xt-lock-name=/var/lock/xtables.lock \
	--with-xtlibdir=/usr/lib/xtables \
	--with-kernel=/opt/padavan-ng-custom/trunk/linux-3.4.x \
	--enable-ipv6 \
	--host=mipsel-linux \
	--build=i686-pc-linux-gnu ; \
)
/bin/sh: 2: **./configure: not found**
Makefile:20: recipe for target 'configure' failed
make[3]: *** [configure] Error 127
make[3]: Leaving directory '/opt/padavan-ng-custom/trunk/user/iptables'
Makefile:12: recipe for target 'config_test' failed
make[2]: *** [config_test] Error 2
make[2]: Leaving directory '/opt/padavan-ng-custom/trunk/user/iptables'
Makefile:177: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/opt/padavan-ng-custom/trunk/user'
Makefile:171: recipe for target 'user_only' failed
make: *** [user_only] Error 2
./build_firmware.sh: 524: ./build_firmware.sh: Bad substitution

WAN interface (services) do not respond

WAN set to IPoE: Static IP (192.168.x.y), and https webadmin interface enabled on the WAN side as well as SSH and to respond to PING request, I'd expect to be able to access services from the WAN port side.

However WAN side doesn't respond. Only when the ethernet cable is plugged to the LAN side, the configured WAN IP responds.

Regression:

  • check lights: blink
  • check connection status: Connected, 100 Mbps, Full Duplex, FC TX/RX
  • disabled firewall on N56U: no difference
  • disabled other connections on the client computer: no difference
  • try PING: Request timeout
  • with and without working gateway on the WAN side: no difference
  • change https admin interface to the same port number as on the LAN side: no difference (only access from LAN side using WAN ipv4)
  • reverting back to Padavan firmware build: PING works on WAN, https web admin/ssh don't respond because the sliders of those are now set to OFF.

Build settings:

CONFIG_FIRMWARE_ENABLE_IPV6=y
CONFIG_FIRMWARE_ENABLE_USB=y
CONFIG_FIRMWARE_ENABLE_EXT4=y
CONFIG_FIRMWARE_ENABLE_SWAP=y
CONFIG_FIRMWARE_INCLUDE_IPSET=y
CONFIG_FIRMWARE_INCLUDE_TCPDUMP=y
CONFIG_FIRMWARE_INCLUDE_HDPARM=y
CONFIG_FIRMWARE_INCLUDE_EAP_PEAP=y
CONFIG_FIRMWARE_INCLUDE_DDNS_SSL=y
CONFIG_FIRMWARE_INCLUDE_DDNS_CERT=y
CONFIG_FIRMWARE_INCLUDE_HTTPS=y
CONFIG_FIRMWARE_INCLUDE_DROPBEAR=y
CONFIG_FIRMWARE_INCLUDE_DROPBEAR_FAST_CODE=y
CONFIG_FIRMWARE_INCLUDE_OPENSSL_EC=y
CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y

Wireguard support

Hi,

@zanezam I'd like to thank you for you work supporting this firmware, its great! Thank you for yr efforts here!

Since this is the only panavan-ng repo where something happens, is there a possibility to implement the WireGuard support here, like its made in https://gitlab.com/dm38/padavan-ng.git ?

Update Libav/ffmpeg

Please update Libav/ffmpeg, so that it supports MPEG-5, HEVC and other codecs.

Since libusb update to v1.0.24 hard links to /usr/share/automake-1.16

libusb-1.0.24$ ls -la | grep ^l

lrwxrwxrwx  1 root root     32 Jul  4 13:38 INSTALL -> /usr/share/automake-1.16/INSTALL
lrwxrwxrwx  1 root root     32 Jul  4 13:38 compile -> /usr/share/automake-1.16/compile
lrwxrwxrwx  1 root root     37 Jul  4 13:38 config.guess -> /usr/share/automake-1.16/config.guess
lrwxrwxrwx  1 root root     35 Jul  4 13:38 config.sub -> /usr/share/automake-1.16/config.sub
lrwxrwxrwx  1 root root     32 Jul  4 13:38 depcomp -> /usr/share/automake-1.16/depcomp
lrwxrwxrwx  1 root root     35 Jul  4 13:38 install-sh -> /usr/share/automake-1.16/install-sh
lrwxrwxrwx  1 root root     38 Jul  4 13:38 ltmain.sh -> /usr/share/libtool/build-aux/ltmain.sh
lrwxrwxrwx  1 root root     32 Jul  4 13:38 missing -> /usr/share/automake-1.16/missing

Better have those files inlined to adapt for different build setups (not having /usr/share/automake-1.16).

As is done with libusb:

$ ls -la | grep ^l
<no output>

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.