This rust project is an example of i2s usage on a stm32f411 chip. It use to i2s peripherals do to a communication between a master transmitter and a slave receiver. I mainly did this because i was in trouble to do communication with an external chip and i wanted to understand what was wrong. Noticeably, the code resynchronize the slave when a desynchronization occurred.

At time of this project, there is no Hardware Abstraction Layer for i2s. Instead, the main source directly access to the hardware using pac module, this is why it contains many unsafe sections.

This project is for a nucleo-f411re but should be easily adaptable for any stm32f4xx using a 8MHz external oscillator. To Adapt it, you need:

• Change ram an flash in memory.x according to your device.
• In Cargo.toml, under dependencies.stm32f4xx-hal replace the stm32f411 feature according to your chip (See here for available chips).
• In Embed.toml, under default.general, replace chip value by your chip (cargo embed --list-chip to get the list of possible value).

This require cargo embed, you can install it with cargo install cargo-embed. Just run cargo embed to build, load, and run the firmware.

This project is licensed under terms of both MIT and Apache licenses. See LICENSE-APACHE.txt and LICENSE-MIT.txt.