yaya131 / openwrt_beta Goto Github PK

root@OpenWrt:~# ubiformat /dev/mtd12 -y -f /tmp/openwrt-ipq807x-generic-xiaomi_ax3600-squashfs-nand-factory.ubi
ubiformat: mtd12 (nand), size 37486592 bytes (35.8 MiB), 286 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
libscan: scanning eraseblock 285 -- 100 % complete
ubiformat: 286 eraseblocks have valid erase counter, mean value is 0
ubiformat: error!: file "/tmp/openwrt-ipq807x-generic-xiaomi_ax3600-squashfs-nand-factory.ubi" is too large (46399488 bytes)
error 0 (No error information)

开启正常，规则也加载，但终端去不了广告，刚刷第一天正常，现在第二天就不行了，重启什么都试过了，ax6是唯一dhcp分配设备，用的稳定精简版

大佬你好，请问有没有AX6稳定版的.config文件，这里只有AP精简和全插件的，麻烦了。

Is it supported mwan3 multi wan or can be manual install?

The following error appears in the log AX6:
daemon.err nlbwmon[9484]: Netlink receive failure: Out of memory
daemon.err nlbwmon[9484]: Unable to dump conntrack: No buffer space available

I wanted to check the values in the /proc/sys/net/core/rmem_max and /proc/sys/net/core/wmem_max files, but they turned out to be empty.
Can you fix it?

Is it possible to add WPA3-192 Enterprise wi-fi support to the firmware?

最新版5.15，设备状态显示为空
之前显示温度的，现在显示空白

你好，请问下国内网盘[AP开源带有线NSS加速AX6-24-1-29.zip]这个包，是是用这个 openwrt_beta 进行编译的吗

找了全网没找到qsdk12内核的actions，烦请大佬指点，内存实在是不够用，不去自定义一下太难了

直接fork过来，然后不作修改手动触发编译AX3600_DCJ，但编译时间超过6小时限制编译失败，AX3600全能版编译也会超时间.请问这个问题可以修复吗？不可以的话可以给出本地编译的条件吗？

我在Boos大的github下提及nss的问题，得到如下回复，大佬看下什么意思

CONFIG_PACKAGE_luci-app-n2n_v2=y

和 ZeroTier 类似的开源软件，用来组建虚拟局域网

老哥，fork你的库编译ax6最近一直失败，是哪里的问题哦

AX3600 operwrt openwrt-ipq807x-generic-xiaomi_ax3600-squashfs-nand-factory.ubi

YAYA131帅哥，160MHZ无法使用，80mhz就重复了，LED灯好像也不正常，再就是无法页面升级，麻烦修正一下，谢谢

I have installed the latest firmware on my AX9000 and it works really well, great work! I'm just confused on why the /overlay partition only has 3 MB space. Is this intended?

我已经在我的 AX9000 上安装了最新的固件，它运行得非常好，干得好！ 我只是对为什么 /overlay 分区只有 3 MB 空间感到困惑。 这是故意的吗？

root@XiaomiAX9000:~# df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                40.0M     40.0M         0 100% /rom
tmpfs                   434.5M      3.4M    431.0M   1% /tmp
/dev/ubi0_2               3.0M      1.6M      1.2M  57% /overlay
overlayfs:/overlay        3.0M      1.6M      1.2M  57% /
tmpfs                   512.0K         0    512.0K   0% /dev

anti-ad规则，微信好像有效，奇怪不知道为什么网页好像无效

换了好几个U盘了，也先格式成Ext4了，但都无法识别。有啥教程么？还是现阶段都弄不了？

大佬能否在下次更新中 为ssrp勾选naiveproxy和hysteria支持呢？

刷入最新版本5.15固件，直接反复重启，一直死循环，没有日志
我刷了uboot,不然路由器就挂了
刷5.10固件正常

RT.5.15内核版本，系统-软件包-更新列表，有几个地址无法更新，

错误
Collected errors:

• opkg_download: Failed to download https://downloads.openwrt.org/snapshots/targets/ipq807x/generic/packages/Packages.gz, wget returned 8.
• opkg_download: Failed to download https://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/helloworld/Packages.gz, wget returned 8.
• opkg_download: Failed to download https://downloads.openwrt.org/snapshots/packages/aarch64_cortex-a53/nss_packages/Packages.gz, wget returned 8.

查看了下这几个链接，都是404.

Hello,

Thanks that you are building OpenWrt for AX6.

Questions:
How to upgrades to a newer release?
Should i use the mtd or ubiformat tool?
What is the purpose of .itb, .ubi and bin?

Thank you.

2.4GHz 802.11n:

root@sion:~# ping openwrt
PING openwrt (192.168.10.1) 56(84) bytes of data.
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=1 ttl=63 time=6.20 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=2 ttl=63 time=5.06 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=3 ttl=63 time=10.3 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=4 ttl=63 time=3.28 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=5 ttl=63 time=18.3 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=6 ttl=63 time=5.21 ms

5GHz ax:

PING openwrt (192.168.10.1) 56(84) bytes of data.
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=1 ttl=63 time=4.59 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=2 ttl=63 time=3.39 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=3 ttl=63 time=13.0 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=4 ttl=63 time=33.6 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=5 ttl=63 time=56.8 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=6 ttl=63 time=3.71 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=7 ttl=63 time=7.43 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=8 ttl=63 time=20.3 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=9 ttl=63 time=44.0 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=10 ttl=63 time=65.1 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=11 ttl=63 time=4.81 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=12 ttl=63 time=11.2 ms
64 bytes from OpenWrt.lan (192.168.10.1): icmp_seq=13 ttl=63 time=33.5 ms

2.4ghz的延迟通常不会超过15ms，5ghz ax的延迟规律是2-3次10ms以下延迟，然后1次30ms左右延迟，最后50ms左右延迟一次。

RT。5.15内核版本，刷机后默认不开启wifi，不方便登录后台管理。必须插网线，很麻烦。
5.10内核的版本，刷入后首次开机就会自动开启SSID为OpenWrt的wifi。
希望修正。

请问ax6000能刷吗？

有 ax6000 刷机或者获取ssh登陆权限的教程吗。感谢……

I see the link https://www.right.com.cn/forum/thread-4875974-1-1.html has options for builds without all the addons but it says "Tourists, please reply if you want to view the hidden content of this post" for the passwords to the other builds. I can't register because I'm from the USA and its not letting me. Anyway I can get help getting the password to download one of the other builds.

防火墙下的 “FullCone-NAT”，没了怎么回事？

用server版Windows还是需要的

适合扩容的机器，插件以出国插件为主，再加个去广告，谢谢

我是小白啊，就用过的几个设备看，5.10内核的温度相对稍高一点

Authorization to the radius server occurs, the client appears connected for a few seconds. After that, the client is deauthenticated from the AX6 side.
Log:
daemon.info hostapd: wlan0: STA 72:66:d3:xx:xx:xx IEEE 802.11: authenticated
daemon.info hostapd: wlan0: STA 72:66:d3:xx:xx:xx IEEE 802.11: associated (aid 1)
daemon.notice hostapd: wlan0: CTRL-EVENT-EAP-STARTED 72:66:d3:xx:xx:xx
daemon.notice hostapd: wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
daemon.notice hostapd: wlan0: CTRL-EVENT-EAP-STARTED 72:66:d3:xx:xx:xx
daemon.notice hostapd: wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
daemon.notice hostapd: wlan0: CTRL-EVENT-EAP-STARTED 72:66:d3:xx:xx:xx
daemon.notice hostapd: wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
daemon.notice hostapd: wlan0: CTRL-EVENT-EAP-STARTED 72:66:d3:xx:xx:xx
daemon.notice hostapd: wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1
daemon.info hostapd: wlan0: STA 72:66:d3:xx:xx:xx IEEE 802.11: deauthenticated due to local deauth request

比如5.14 5.16的

Are there any english instructions of how to install openwrt on AX9000? I’ve read your topic on right.com.cn with translation, but unfortunately translation is very bad and I’ve not understood some nuances…

有沒有關於如何在 AX9000 上安裝 openwrt 的英文說明？我在right.com.cn上閱讀了您的主題並進行了翻譯，但不幸的是翻譯非常糟糕，我沒有理解一些細微差別...

这是正常的吗？流量分载没显示运行