cpu_rec is a tool that recognizes cpu instructions in an arbitrary binary file. It can be used as a standalone tool, or as a plugin for binwalk (https://github.com/devttys0/binwalk).

1. Copy cpu_rec.py and cpu_rec_corpus in the same directory.
2. If you don't have the lzma module installed for your python (this tool works either with python3 or with python2 >= 2.4) then you should unxz the corpus files in cpu_rec_corpus.
3. If you want to enhance the corpus, you can add new data in the corpus directory. If you want to create your own corpus, please look at the method build_default_corpus in the source code.

Same as above, but the installation directory must be the binwalk module directory: $HOME/.config/binwalk/modules.

You'll need a recent version of binwalk, that includes the patch provided by ReFirmLabs/binwalk#241 .

Add the flag -% when using binwalk.

Be patient. Waiting a few minutes for the result is to be expected. On my laptop the tool takes 25 seconds and 1 Gb of RAM to create the signatures for 70 architectures, and then the analysis of a binary takes one minute per Mb. If you want the tool to be faster, you can remove some architectures, if you know that your binary is not one of them (typically Cray or MMIX are not found in a firmware).

Just run the tool, with the binary file(s) to analyze as argument(s) The tool will try to match an architecture for the whole file, and then to detect the largest binary chunk that corresponds to a CPU architecture; usually it is the right answer.

If the result is not satisfying, prepending twice -v to the arguments makes the tool very verbose; this is helpful when adding a new architecture to the corpus.

If https://github.com/LRGH/elfesteem is installed, then the tool also extract the text section from ELF, PE, Mach-O or COFF files, and outputs the architecture corresponding to this section; the possibility of extracting the text section is also used when building a corpus from full binary files.

Option -d followed by a directory dumps the corpus in that directory; using this option one can reconstruct the default corpus.

Running the tool as a binwalk module typically results in:

shell_prompt> binwalk -% corpus/PE/PPC/NTDLL.DLL corpus/MSP430/goodfet32.hex

Target File:   .../corpus/PE/PPC/NTDLL.DLL
MD5 Checksum:  d006a2a87a3596c744c5573aece81d77

DECIMAL       HEXADECIMAL     DESCRIPTION
--------------------------------------------------------------------------------
0             0x0             None (size=0x5800)
22528         0x5800          PPCel (size=0x4c800)
335872        0x52000         None (size=0x1000)
339968        0x53000         IA-64 (size=0x800)
342016        0x53800         None (size=0x21800)

Target File:   .../corpus/MSP430/goodfet32.hex
MD5 Checksum:  4b295284024e2b6a6257b720a7168b92

DECIMAL       HEXADECIMAL     DESCRIPTION
--------------------------------------------------------------------------------
0             0x0             MSP430 (size=0x5200)
20992         0x5200          None (size=0xe00)

We can notice that during the analysis of PPC/NTDLL.DLL a small chunk has been identified as IA-64. This is an erroneous detection, due to the fact that the IA-64 architecture has statistical properties similar to data sections.

68HC08 68HC11 8051 Alpha ARcompact ARM64 ARMeb ARMel ARMhf AVR AxisCris Blackfin Cell-SPU CLIPPER CompactRISC Cray Epiphany FR-V FR30 FT32 H8-300 HP-Focus HP-PA i860 IA-64 IQ2000 M32C M32R M68k M88k MCore Mico32 MicroBlaze MIPS16 MIPSeb MIPSel MMIX MN10300 Moxie MSP430 NDS32 NIOS-II OCaml PDP-11 PIC10 PIC16 PIC18 PIC24 PPCeb PPCel RISC-V RL78 ROMP RX S-390 SPARC STM8 Stormy16 SuperH TILEPro TLCS-90 TMS320C2x TMS320C6x V850 VAX Visium WE32000 X86-64 X86 Xtensa Z80 #6502#cc65

The cpu_rec.py file is licenced under a Apache Licence, Version 2.0.

The files in the default corpus have been built from various sources. The corpus is a collection of various compressed files, each compressed file is dedicated to the recognition of one architecture and is made by the compression of the concatenation of one or many binary chunks, which come from various origins and have various licences. Therefore, the default corpus is a composite document, each sub-document (the chunk) being redistributed under the appropriate licence.

The origin of each chunk is described in cpu_rec.py, in the function build_default_corpus. The licences are:

• files libgmp.so, libc.so, libm.so come from Debian binary distributions and are distributed under GPLv2 (and LGPLv3 for recent versions of libgmp) and the source code is available from http://archive.debian.org/.
• busybox binaries come from https://busybox.net/downloads/binaries/ and are distributed under GPLv2.
• C-Kermit binaries come from ftp://kermit.columbia.edu/kermit/bin/ and are distributed under GPLv2 (according to ftp://kermit.columbia.edu/kermit/archives/COPYING but the status of each binary is not always clear).
• all files identified in build_default_corpus as part of the CROSS_COMPILED subdirectory have been built by myself. The corresponding source code are zlib (from http://zlib.net/, distributed under the zlib licence) or libjpeg (from http://www.ijg.org/, distributed under an unknown licence) or some other code based on public sources (e.g. https://anonscm.debian.org/cgit/pkg-games/bsdgames.git/tree/arithmetic/arithmetic.c modified to work with SDCC compilers).
• The camlp4 binary is built from https://github.com/ocaml/camlp4 and distributed under LGPLv2.
• The binary for TMS320C2x comes from https://github.com/slavaprokopiy/Mini-TMS320C28346/blob/master/For_user/C28346_Load_Program_to_Flash/Debug/C28346_Load_Program_to_Flash.out where it is distributed under an unknown licence.
• The binary for RISC-V comes from https://riscv.org/software-tools/ distributed under GPLv2 and can downloaded at https://github.com/radare/radare2-regressions/blob/master/bins/elf/analysis/guess-number-riscv64
• The binaries for PIC10 and PIC16 come from http://www.pic24.ru/doku.php/en/osa/ref/examples/intro where they are distributed under an unknown licence.
• The binary for PIC18 comes from https://github.com/radare/radare2-regressions/blob/master/bins/pic18c/FreeRTOS-pic18c.hex where it seems to be distributed under GPLv3 (or later).
• The binary for PIC24 comes from https://raw.githubusercontent.com/mikebdp2/Bus_Pirate/master/package_latest/BPv4/firmware/bpv4_fw7.0_opt0_18092016.hex distributed under Creative Commons Zero.