xvortex / rockbox Goto Github PK

Hi again, I hope you are alive. :-)

I noticed that access to storage while charging device via USB is not always possible.

Procedure to recreate the problem:

1. Unplug device from USB, turn it off
2. Remove SD card from device and place it to computer directly
3. You can access the SD
4. Remove SD card from computer and place it to device again
5. Connect device via USB to computer
6. It's charging and storage access via USB is possible
7. Unpluged USB
8. Plug USB again
9. You cannot access storage via USB any more, you need to go to step 1 and repeat all procedure again to be able to access storage via USB one more time.

Something is clearly blocking the access once USB detached.

Thank you!
K

Fast forward stops working with M4B files. What it does is the audio restart at the beginning of the file, but the time counter increments as normal when holding down the Next button. This also does the same thing with the Prev button being pressed down.

I checked if it does this with a MP3 file, this issue doesn't come up. It only started when I used the cue files on M4B files with total times larger than 10 hours.

I have found what causes this, turning off cuesheet support causes this. Turning this back on fixes this but also resets any paused position you have back to the beginning.

I don't use album art in tags (per song), but rather have one file Folder.jpg sitting in the album folder. In contrast to other devices from the rockbox site, your port of X3ii doesn't display that picture in the WPS (using a theme that is supposed to show it).

Would love to see this fixed. Thanks.

Some Rockbox settings could be by default adjusted for X3 devices. For instance battery settings could be set to 1500 mAh by default.

Also X3 display is not really good for sunny days, so maybe for that device would better would be LCD negative mode or maybe other theme?

Thanks,
K

Currently 'option' button acts as 'home/back' and 'home/back' button act as 'option'. These should be swapped. Thanks.

When the .rockbox folder is deleted the bootloader is stuck in a while loop
You then have to reset the device.
I think a far better solution would be to display the error message for like 30 seconds and then power of the device

Greetings jahill

Hi!

First of all thank you so much for making Rockbox available for xduoo x3! I really appreciate it.

As we know X3 has two jack output sockets, for headphones and line-out. Original software keeps volume information for both sockets independently, when you use headphone socket you get last used volume level for headphones and for line-out you get simply 100 volume level.

Current version of Rockbox use the same volume value for both, which can be pretty painful - being in a car I use line-out with 100% volume level but then when I switch to headphone socket I can forget that last used volume level is 100% and them my ears start bleeding from that loudness. This is pretty dangerous.

Do you think you could make Rockbox remembering last headphone volume level and switch to that value once jack plug is inserted back to headphone socket, and for line-out socket is it possible to fix a value with 100%?

Thank you once again and kind regards,
K

Hi,

It would be good to heave this feature, to pause rockbox once both jack sockets become free.

Thanks,
K

Hello. I received my Xduoo X3 today, and I immediately installed Rockbox out of the box (excuse the rhyme). The installation was quick and hassle-free, until I noticed something when I connected my RB'ed X3. Only the first microSD slot is showing up on Windows (to be specific, I'm using Windows 7 64-bit SP1), while the second slot is ignored. There is a way for the second slot to be recognized by Windows (via Settings -> General Settings -> System ->USB Hide Internal Drive -> Yes), but then the first slot isn't recognized if you use that setting. A bit of a hassle if you're going to add files on both slots.

This isn't a problem if you boot up on Xduoo's stock firmware. Both microSD slots appear on Windows. Here's hoping that both microSD slots appear on Windows if you booted up on Rockbox on the next update. It would be much easier for the users if they don't have to boot up on stock firmware just to transfer files on both slots. Thank you very much!

Regards,
mono-type