xjtuecho / ds213_echo Goto Github PK

hi @xjtuecho

really appreciate the work and effort :)

I have just checked out your latest update and it didn't flash correclty.
I get an error on the final part (DS213_ECHO_v20.11.25) and I think it's because you might ahve not pushed a new hex.
Your read me clearly states DS213_ECHO_v20.12.25.hex but the last checked in hex is 20.11.26

everything else goes through:

• FPGA_CFG.USE
• STMU_213_018.rdy

hope you have some new binaries to push

thanks
ubi

When ROLL mode is selected while scrolling through the modes. The Xpos (viewing windows x position) is reset to the beginning/left. All other modes keeps Xpos as is and it's not wanted behavior

Hey,
I'm not familiar with arm-none-eabi-gcc or how to build SMT32 firmware. Could you give some link to a tutorial or maybe write guide how to build this repository? Do I need STM32CubeIDE or VSCode is just as good and building is done through CLI?

If I'd figure out I would update README with step by step tutorial for others too. Also I want to do some minor changes to the code.

Any help is appreciated

Hello, the manual says:
Copy DS213_ECHO_v20.12.25.hex to DFU disk.
The Release folder contains DS213_ECHO_v20.11.25.hex and DS213_ECHO_v20.11.26.hex.
Which one do I end up installing?