willza3 / opencore-strix-b450i Goto Github PK

I am running into this issue but the fix does not work for me: https://dortania.github.io/OpenCore-Desktop-Guide/troubleshooting/troubleshooting.html#frozen-in-the-macos-installer-after-30-seconds

This repository is using AMDRyzenCPUPowerManagement.kext instead of NullCPUPowerManagement.kext so i tried to remove it and use DummyPowerManagement instead but it didn't work.

Hi
First, Thank you for your efi.
Based on your efi.
I choose the same motherboard as you.
I used BCM94352z for my wifi/bt but not works.
May I know which wifi/bt card you used?
Thank you again.

Good morning, I attach the final version of my EFI for Sonoma working, if you are going to use it, update ACPI with SSD-time (in case of reboots) and the SMBIOS. that should be enough

asus B450i + Ryzen 5700 + AORUS 6800 RADEON ,BIOS 5003, worked audio, LAN. wifi changed be200 intel
https://drive.google.com/file/d/19COGBvBY0frP3SOjgtH5FBMcPt2MfX9e/view?usp=sharing

I have 2 m2 nvme ssd. I want to install on the second one. But when set csm to disable, the second m2 become the external storage. So, not work. When I enable it, the new version couldn't work(even can't reinstall).Is there any solution?

Hardware:

Strix B450-I
16GB RAM @ 3600MHz
3600X @ Stock Clocks
5500XT using agdpmod=pikera
256GB SATA SSD

MacOS 10.15.3 installed without issues. Got prompted for MacOS 10.15.4 update within MacOS itself. Attempted installing.

Asks to reboot to install, I reboot, 10.15.4 update does not get installed. Am I missing something?

I tried to do a full install (clean install) of 10.15.4 using the same EFI Folder, etc, but the install fails with an error (will try this again later to get the full output) but was something to the effect of "Intel_Processor_PENRYN" not found.

Willza3, were you able to install 10.15.4 either through an update or via a clean install?

Thanks for your work! :D

After updating to 0.5.9 audio isn't working, also im using Mac7,1 as SMBIOS

Hello all! My installer keeps failing at the 3 minute mark using the GitHub efi I can pull the installer log if that will help

I installed macOS 10.15.4 after updating Patch. Everything works but iCloud. iMessage and FaceTime works. The iCloud folder is always empty.

_{Sent from PPHub}

Hi there,

Thank you for your works. I'm trying to monitor temp using HWMonitor but nothing show up (CPU Temp, GPU Temp, Fan Speed...). Any guide or update to fix this issue, please?

Thank you.

Hello.
I bought a ROG Strix X570-E Gaming and I managed to install MacOS.
However, only my sound card does not work and I don't know how i can make it work.
I already read the opencore guide but I don't understand what i should do.
But I saw your Asus Strix B450-i has the same sound card (SupremeFX S1220A) than me but also that you had managed to make it work.
So my question is how you got this and can you explained to me ?

Hello, thank you for the files, I have B450-i strix mainboard, 2700x and I make USB stick installer using AMD OS X Vanilla Guide, then replace with your EFI, setting up BIOS as your guide except CSM enabled because otherwise it won't boot to usb and goes straight to windows. When I tried to boot from USB installer it got stucked at blinking cursor. Do you know how to fix that? Thanks/.

This new version has some problem with Audio, B450-f no audio input or output. BTW thank you so much for this build

I hope this is useful. Thanks: https://github.com/willza3/macOS-strix-B450i

Running Catalina 10.15.3
MB : Asus ROG Strix B450-F
CPU: Ryzen 7 2700x
Ram : Corsair Vengance 8GBx4=32GB
HD : Seagate Barracuda 2TB (Data)
SSD : PNY 120 GB (MacOS)
Power Supply : Corsair CX750 M
Graph Card : Sapphire RX 570 8GB
WIFi: USB Adapter TL-WN823N
Case: Corsair Carbide Spec 06

When i see movies or videos of high consume resources (HDR or 4k) display goes lagging, and interacting with machine is not just smooth... Could be a problem with GPU? I've a ASRock RX580 8GB OC

This doesn't happen with windows nor Linux, could give some support please?

Finally, I ve return to my old and stable Catalina. I hope new EFI will works fine. My issues was green screen on Apple TV and the usb wireless won't work, only ethernet . With Catalina works fine. Regards.

Originally posted by @Gizmo648 in #25 (comment)

hi, asus B450i + nvidia 730 error install monterrey use EFI willza3 , coments exploration

08:777 00:056 AAPL: #[EB|RPS] 0 0 0
08:833 00:056 AAPL: #[EB.OPT.LXF|F] <"\macOS Install Data\Locked Files\Boot Files\com.apple.Boot.plist">
08:890 00:056 AAPL: #[EB.LD.LF|IN] 0 1 <"\macOS Install Data\Locked Files\Boot Files\com.apple.Boot.plist"> <"0">
08:947 00:057 AAPL: #[EB|KF] <"-no_panic_dialog -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/BaseSystem.dmg lca-boot-mode=autoinstall-msu">
09:004 00:056 AAPL: #[EB|MBA:CL] <"">
09:061 00:056 AAPL: #[EB|MBA:NV] <"debug=0x100 keepsyms=1 npci=0x2000 slide=109">
09:118 00:056 AAPL: #[EB|MBA:KF] <"-no_panic_dialog -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/BaseSystem.dmg lca-boot-mode=autoinstall-msu">
09:174 00:056 AAPL: #[EB|MBA:OUT] <"debug=0x100 keepsyms=1 npci=0x2000 slide=109 -no_panic_dialog -rootdmg-ramdisk auth-root-dmg=file:///macOS%20Install%20Data/BaseSystem.dmg lca-boot-mode=autoinstall-msu chunklist-security-epoch=0 -chunklist-no-rev2-dev">
09:231 00:056 AAPL: #[EB.CSR.S|VAR] 0x00000040
09:288 00:056 AAPL: #[EB|OPT:BM] 0x200080
09:344 00:056 AAPL: #[EB.OPT.LXF|F] <"\macOS Install Data\Locked Files\Boot Files\PlatformSupport.plist">
09:401 00:056 AAPL: #[EB.LD.LF|IN] 0 1 <"\macOS Install Data\Locked Files\Boot Files\PlatformSupport.plist"> <"0">
09:458 00:057 AAPL: #[EB|KMR] 370532352
09:515 00:056 AAPL: #[EB.CS.CSKSD|+]
09:572 00:057 AAPL: #[EB.CS.CSKSD|!] Err(0xE) <- RT.GV boot-info-payload 8D63D4FE-BD3C-4AAD-881D-86FD974BC1DF
09:628 00:056 AAPL: #[EB.G.CS|-?] Ok(0)
09:688 00:059 AAPL: #[EB.LD.LF|IN] 0 1 <""> <"1">
09:745 00:057 AAPL: #[EB.B.SBS|SZ] 723512
09:807 00:062 AAPL: #[EB|B:SHA]
09:864 00:056 AAPL: #[EB.WL.PWLFNV|!] Err(0xE) <- RT.GV wake-failure 7C436110-AB2A-4BBB-A880-FE41995C9F82
09:921 00:056 AAPL: #[EB.WL.DT|!] Err(0xE) <- EB.WL.PWLFNV
13:026 03:105 AAPL: #[EB.WL.PWLFRTC|NONE]
13:083 00:057 AAPL: #[EB.WL.DT|!] Err(0xE) <- EB.WL.PWLFRTC
13:140 00:056 AAPL: #[EB.LD.LKC|CFG] <"\macOS Install Data\Locked Files\Boot Files\BootKernelExtensions.kc">
13:197 00:056 AAPL: #[EB.LD.LF|IN] 0 1 <"\macOS Install Data\Locked Files\Boot Files\BootKernelExtensions.kc"> <"0">
14:641 01:444 AAPL: #[EB|SB:P] 0x1
14:710 00:069 AAPL: #[EB|SB:SBGMFNS] j137ap.im4m
14:767 00:056 AAPL: #[EB|SB:MF] \macOS Install Data\Locked Files\Boot Files\BootKernelExtensions.kc.j137ap.im4m
14:824 00:056 AAPL: #[EB.LD.LF|IN] 0 1 <"\macOS Install Data\Locked Files\Boot Files\BootKernelExtensions.kc.j137ap.im4m"> <"0">
14:881 00:057 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"\macOS Install Data\Locked Files\Boot Files\BootKernelExtensions.kc.j137ap.im4m">
14:938 00:056 AAPL: #[EB.SB.VK|!] Err(0xE) <- EB.LD.LF
14:995 00:057 AAPL: #[EB.LD.LKCFFP|!] Err(0x1A) <- EB.SB.SBVK
15:056 00:060 AAPL: #[EB|CS:SRBM] secure-boot
15:119 00:062 AAPL: #[EB|B:RB]
15:175 00:056 AAPL: #[EB|WL] 0 0 0x01 0x41 24 0x0E
15:232 00:056 AAPL: #[EB|REBOOT] 1
15:289 00:056 AAPL: #[EB|LOG:RESET:RECOVERY] 2021-11-22T09:17:35

This section is open for general discussion; requests, questions, etc. When opening a new issue, please make sure to assign me to it - otherwise I may never see it!

💬 Telegram Channel/Group Chat

Hi willza3,

I would like to thank you for your efi. I have the same hardware as you. Working great. But I have 3 issues:
1.When starting Boot, the bar under the apple runs very slowly. it takes 2-3 minutes to boot up the macos screen and then it will lose the keyboard (this action only occasionally happens)
I see "00: 000 00: 000 OCB: Failed to match a default boot option" in efi log.
And I got a new blinking flashed into the boot screen MACOS (at 0:17 video below)
See video: https://www.dropbox.com/s/cwgcblxf89q6dwc/Video%205-20-20%2C%2017%2046%2044.mov?dl=0

2. And sometimes the computer mouse is disconnected or Stuck at the sreen.(at 0:07s in the video below)

https://www.dropbox.com/s/l2jpxvy9cduu6ov/Video%205-21-20%2C%2006%2029%2031.mov?dl=0

Are u having troubles like me?

Ryzen R5 3600
B450-I Gaming Rog Strix – updated lastest verion bios.
AMD RX 580 nitro+ 8gb

I'm looking for a procedure to move all required boot components from USBdisk to internal drive. How it can be done?

Installing Big Sur 11.3 and replace the last EFI that u update 7 days ago. And working great . Everything ok util now. Apple TV without green screen. GOOD.

use the same config plist file, I can only use HDMI or DP audio, Audio Jacks not working and not showing on output devices.

As the title says

If you use shikigva=80 in the boot args it fixes Apple TV+ and all drm issues with this configuration

I have installed Big Sur and works fine and I feel more speed than Catalina.
But when i play movies in Apple TV the screen turns on green . This issue had been fixit previously with Catalina. But now, with Big Sur this issue returns.

I had no issue before the 10.15.5 and 0.5.9,
but I can't get any internet connection after the sleep-wake.
I'm using the same motherboard b450-i Strix and the onboard LAN.
Does anybody have any info on this issue?

hi, asus B450i + Ryzen 5700 + AORUS 6800 RADEON. error install SONOMA use EFI willza3 , coments exploration

46:145 00:074 OCAK: [OK] SMBIOS Patch success
46:221 00:076 OCAK: Failed to pk find com.apple.driver.AppleIntelCPUPowerManagement - Not Found
46:305 00:083 OCAK: [OK] Skipping dummy AppleIntelCPUPowerManagement patch on 230300
46:547 00:242 OC: Prelinked status - Success
46:629 00:082 AAPL: #[EB.LD.LKFS|-?] Ok(0)
46:704 00:074 AAPL: #[EB.LD.LKC|-?] Ok(0)
46:782 00:078 AAPL: #[EB|BST:REV1]
46:857 00:074 AAPL: #[EB|CSR:OUT] 0x00000040
46:944 00:086 AAPL: #[EB.BST.FBS|+]
47:018 00:074 AAPL: #[EB.BST.FBS|ADSZ] 0
47:092 00:074 AAPL: #[EB.BST.FBS|KSSZ] 0
47:167 00:075 AAPL: #[EB|SB:SBGMFNS] x86legacyap.im4m
47:347 00:179 AAPL: #[EB|RH:PF] usr\standalone\OS.dmg.root_hash
47:422 00:075 AAPL: #[EB|RH:MF] <"usr\standalone\OS.dmg.root_hash.x86legacyap.im4m">
47:507 00:084 AAPL: #[EB.LD.LF|IN] 0 1 <"usr\standalone\OS.dmg.root_hash"> <"0">
47:616 00:108 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"usr\standalone\OS.dmg.root_hash">
47:691 00:074 AAPL: #[EB.RH.LRH|P!] Err(0xE) <- EB.LD.LF
47:766 00:075 AAPL: #[EB.BST.FBS|!] Err(0xE) <- EB.RH.LRH
47:840 00:074 OCSMC: SmcReadValue Key 4D535463 Size 1
47:915 00:074 OCSMC: SmcReadValue Key 4D534163 Size 2
48:000 00:085 AAPL: #[EB|LOG:DT] 2024-03-11T09:48:07
48:075 00:075 AAPL: #[EB|LOG:EXITBS:START] 2024-03-11T09:48:07

opencore-2024-03-11-094719.txt

@willza3 - Did you experience sleep problem ? Cannot wake after sleep at all ( cpu, psu fan still spin, keyboard + mouse disconnected and cannot wake0. Just change CPU from 2400G -> 3500 and native mac wifi card and face this issue. LOL too many things to handle. I heard that this is the known issue but why it works for me at first but now didn't ...

Originally posted by @tranhoanvo in #5 (comment)

So I just switch to R9 Nano, boot seem fine, nothing wrong, but when it get pass thourgh login screen, then come to freeze. I heard R9 Nano work fine with Catalina, maybe a fresh install will fixit, will try at the weekend.

Specs: Ryzen 5 2600 + 32Gb DDR4 + R9 Nano 4Gb.