A Raspberry Pi distribution for 3d printers. It includes the OctoPrint host software for 3d printers out of the box and mjpg-streamer with RaspiCam support for live viewing of prints and timelapse video creation.

This repository contains the source script to generate the distribution out of an existing Raspbian distro image.

Download the latest stable build via this button:

Official mirror is here

Second mirror is here

Nightly builds are available here

64bit Nightly builds are available here

1. Unzip the image and install it to an sd card like any other Raspberry Pi image
2. Configure your WiFi by editing octopi-wpa-supplicant.txt on the root of the flashed card when using it like a thumb drive
3. Boot the Pi from the card

4. Log into your Pi via SSH (it is located at octopi.local if your computer supports bonjour or the IP address assigned by your router), default username is "pi", default password is "raspberry". Run sudo raspi-config. Once that is open:

   1. Change the password via "Change User Password"
   2. Optionally: Change the configured timezone via "Localization Options" > "Timezone".
   3. Optionally: Change the hostname via "Network Options" > "Hostname". Your OctoPi instance will then no longer be reachable under octopi.local but rather the hostname you chose postfixed with .local, so keep that in mind.

   You can navigate in the menus using the arrow keys and Enter. To switch to selecting the buttons at the bottom use Tab.

   You do not need to expand the filesystem, current versions of OctoPi do this automatically.

OctoPrint is located at http://octopi.local and also at https://octopi.local. Since the SSL certificate is self signed (and generated upon first boot), you will get a certificate warning at the latter location, please ignore it.

To install plugins from the commandline instead of OctoPrint's built-in plugin manager, pip may be found at /home/pi/oprint/bin/pip. Thus, an example install cmd may be: /home/pi/oprint/bin/pip install <plugin-uri>

If a USB webcam or the Raspberry Pi camera is detected, MJPG-streamer will be started automatically as webcam server. OctoPrint on OctoPi ships with correctly configured stream and snapshot URLs pointing at it. If necessary, you can reach it under http://octopi.local/webcam/?action=stream and SSL respectively, or directly on its configured port 8080: http://octopi.local:8080/?action=stream.

• OctoPrint host software for 3d printers out of the box
• Raspbian tweaked for maximum performance for printing out of the box
• mjpg-streamer with RaspiCam support for live viewing of prints and timelapse video creation.

1. qemu-arm-static
2. CustomPiOS
3. Downloaded Raspbian image.
4. root privileges for chroot
5. Bash
6. git
7. sudo (the script itself calls it, running as root without sudo won't work)
8. jq (part of CustomPiOS dependencies)

OctoPi can be built from Debian, Ubuntu, Raspbian, or even OctoPi. Build requires about 2.5 GB of free space available. You can build it by issuing the following commands:

sudo apt-get install gawk util-linux qemu-user-static git p7zip-full python3

git clone https://github.com/guysoft/CustomPiOS.git
git clone https://github.com/guysoft/OctoPi.git
cd OctoPi/src/image
wget -c --trust-server-names 'https://downloads.raspberrypi.org/raspios_lite_armhf_latest'
cd ..
../../CustomPiOS/src/update-custompios-paths
sudo modprobe loop
sudo bash -x ./build_dist

OctoPi supports building variants, which are builds with changes from the main release build. An example and other variants are available in CustomPiOS, folder src/variants/example.

docker exec -it mydistro_builder:

sudo docker exec -it mydistro_builder build [Variant]

Or to build a variant inside a container:

sudo bash -x ./build_dist [Variant]

See Building with docker entry in wiki

There is a vagrant machine configuration to let build OctoPi in case your build environment behaves differently. Unless you do extra configuration, vagrant must run as root to have nfs folder sync working.

Make sure you have a version of vagrant later than 1.9!

If you are using older versions of Ubuntu/Debian and not using apt-get from the download page.

To use it:

sudo apt-get install vagrant nfs-kernel-server virtualbox
sudo vagrant plugin install vagrant-nfs_guest
sudo modprobe nfs
cd ../OctoPi
git clone https://github.com/guysoft/CustomPiOS.git    
cd OctoPi/src
../../CustomPiOS/src/update-custompios-paths
cd OctoPi/src/vagrant
sudo vagrant up
run_vagrant_build.sh

After provisioning the machine, its also possible to run a nightly build which updates from devel using:

cd OctoPi/src/vagrant
run_vagrant_build.sh

To build a variant on the machine simply run:

cd src/vagrant
run_vagrant_build.sh [Variant]

1. If needed, override existing config settings by creating a new file src/config.local. You can override all settings found in src/modules/octopi/config. If you need to override the path to the Raspbian image to use for building OctoPi, override the path to be used in ZIP_IMG. By default the most recent file matching *-raspbian.zip found in src/image will be used.
2. Run src/build_dist as root.
3. The final image will be created at the src/workspace

Code contribution would be appreciated!