This repository is an adaptation of ryanmcdermott/clean-code-javascript for Dart language.
- Introduction
- Variables
- Functions
- Objects and Data Structures
- Classes
- SOLID
- Testing
- Concurrency
- Error Handling
- Formatting
- Comments
- Translation
Software engineering principles, from Robert C. Martin's book Clean Code, adapted for Dart. This is not a style guide. It's a guide to producing readable, reusable, and refactorable software in Dart.
Not every principle herein has to be strictly followed, and even fewer will be universally agreed upon. These are guidelines and nothing more, but they are ones codified over many years of collective experience by the authors of Clean Code.
Our craft of software engineering is just a bit over 50 years old, and we are still learning a lot. When software architecture is as old as architecture itself, maybe then we will have harder rules to follow. For now, let these guidelines serve as a touchstone by which to assess the quality of the Dart code that you and your team produce.
One more thing: knowing these won't immediately make you a better software developer, and working with them for many years doesn't mean you won't make mistakes. Every piece of code starts as a first draft, like wet clay getting shaped into its final form. Finally, we chisel away the imperfections when we review it with our peers. Don't beat yourself up for first drafts that need improvement. Beat up the code instead!
Bad:
final yyyymmdstr = DateFormat('yyyy/MM/dd').format(DateTime.now());Good:
final currentDate = DateFormat('yyyy/MM/dd').format(DateTime.now());Bad:
getUserInfo();
getClientData();
getCustomerRecord();Good:
getUser();We will read more code than we will ever write. It's important that the code we do write is readable and searchable. By not naming variables that end up being meaningful for understanding our program, we hurt our readers. Make your names searchable.
Bad:
// What the heck is 32 for?
Future.delayed(Duration(minutes: 32), launch);Good:
// Declare them as const if the value is known at compile time;
// Declare as final if the variable is assigned just once;
// Use lowerCamelCase;
// setupTimeInMinutes is int, because the type is inferred.
const setupTimeInMinutes = 32;
Future.delayed(Duration(minutes: setupTimeInMinutes), launch);Bad:
const address = <String>['One Infinite Loop', 'Cupertino', '95014'];
saveCityZipCode(address[1], address[2]);Good:
const address = <String>['One Infinite Loop', 'Cupertino', '95014'];
final city = address[1];
final zipCode = address[2];
saveCityZipCode(city, zipCode);Explicit is better than implicit.
Bad:
const locations = <String>['Austin', 'New York', 'San Francisco'];
locations.forEach((l) {
doStuff();
doSomeOtherStuff();
// ...
// ...
// ...
// Wait, what is `l` for again?
dispatch(l);
});Good:
const locations = <String>['Austin', 'New York', 'San Francisco'];
locations.forEach((location) {
doStuff();
doSomeOtherStuff();
// ...
// ...
// ...
dispatch(location);
});If your class/object name tells you something, don't repeat that in your variable name.
Bad:
final car = Car(
carMake: 'Honda',
carModel: 'Accord',
carColor: 'Blue',
);
void paintCar(Car car, String color) {
car.carColor = color;
}Good:
final car = Car(
make: 'Honda',
model: 'Accord',
color: 'Blue',
);
void paintCar(Car car, String color) {
car.color = color;
}Default parameters are often cleaner than short circuiting, however they must be const, so you cannot use them on every case.
Bad:
void createMicrobrewery({String? name}) {
final breweryName = name ?? 'Hipster Brew Co.';
// ...
}Good:
void createMicrobrewery({String breweryName = 'Hipster Brew Co.'}) {
// ...
}Limiting the amount of function parameters is incredibly important because it makes testing your function easier. Having more than three leads to a combinatorial explosion where you have to test tons of different cases with each separate argument.
One or two arguments is the ideal case, and three should be avoided if possible. Anything more than that should be consolidated. Usually, if you have more than two arguments then your function is trying to do too much. In cases where it's not, most of the time a higher-level object will suffice as an argument.
To make it obvious what properties the function expects, you can use named parameters. They have a few advantages:
- When someone looks at the function signature, it's immediately clear what properties are being used.
- Linters can warn you about unused properties, if they are
required.
Bad:
Menu getMenu(String title, String body, String buttonText, bool cancellable) {
// ...
}Good:
Menu getMenu({
required String title,
required String body,
required String buttonText,
required bool cancellable,
}) {
// ...
}
final menu = getMenu(
title: 'Foo',
body: 'Bar',
buttonText: 'Baz',
cancellable: true,
);This is by far the most important rule in software engineering. When functions do more than one thing, they are harder to compose, test, and reason about. When you can isolate a function to just one action, it can be refactored easily and your code will read much cleaner. If you take nothing else away from this guide other than this, you'll be ahead of many developers.
Bad:
void emailClients(List<Client> clients) {
for(final client in clients) {
final clientRecord = database.lookup(client);
if (clientRecord.isActive()) {
email(client);
}
}
}Good:
void emailActiveClients(List<Client> clients) {
clients
.where(isActiveClient)
.forEach(email);
}
bool isActiveClient(Client client) {
final clientRecord = database.lookup(client);
return clientRecord.isActive();
}Bad:
void addToDate(DateTime date, int months) {
// ...
}
final currentDate = DateTime.now();
// It's hard to tell from the function name what is added
addToDate(currentDate, 1);Good:
void addMonthsToDate(int months, DateTime date) {
// ...
}
final currentDate = DateTime.now();
addMonthsToDate(1, currentDate);When you have more than one level of abstraction your function is usually doing too much. Splitting up functions leads to reusability and easier testing.
Bad:
void parseBetterAlternative(String code) {
const regexes = [
// ...
];
final statements = code.split(' ');
final tokens = [];
for (final regex in regexes) {
for (final statement in statements) {
tokens.add( /* ... */ );
}
}
final ast = <Node>[];
for (final token in tokens) {
ast.add( /* ... */ );
}
for (final node in ast) {
// parse...
}
}Good:
List<String> tokenize(String code) {
const regexes = [
// ...
];
final statements = code.split(' ');
final tokens = <String>[];
for (final regex in regexes) {
for (final statement in statements) {
tokens.add( /* ... */ );
}
}
return tokens;
}
List<Node> lexer(List<String> tokens) {
final ast = <Node>[];
for (final token in tokens) {
ast.add( /* ... */ );
}
return ast;
}
void parseBetterAlternative(String code) {
final tokens = tokenize(code);
final ast = lexer(tokens);
for (final node in ast) {
// parse...
}
}Do your absolute best to avoid duplicate code. Duplicate code is bad because it means that there's more than one place to alter something if you need to change some logic.
Imagine if you run a restaurant and you keep track of your inventory: all your tomatoes, onions, garlic, spices, etc. If you have multiple lists that you keep this on, then all have to be updated when you serve a dish with tomatoes in them. If you only have one list, there's only one place to update!
Oftentimes you have duplicate code because you have two or more slightly different things, that share a lot in common, but their differences force you to have two or more separate functions that do much of the same things. Removing duplicate code means creating an abstraction that can handle this set of different things with just one function/module/class.
Getting the abstraction right is critical, that's why you should follow the SOLID principles laid out in the Classes section. Bad abstractions can be worse than duplicate code, so be careful! Having said this, if you can make a good abstraction, do it! Don't repeat yourself, otherwise you'll find yourself updating multiple places anytime you want to change one thing.
Bad:
Widget buildDeveloperCard(Developer developer) {
return CustomCard(
expectedSalary: developer.calculateExpectedSalary(),
experience: developer.getExperience(),
projectsLink: developer.getGithubLink(),
);
}
Widget buildManagerCard(Manager manager) {
return CustomCard(
expectedSalary: manager.calculateExpectedSalary(),
experience: manager.getExperience(),
projectsLink: manager.getMBAProjects(),
);
}Good:
Widget buildEmployeeCard(Employee employee) {
String projectsLink;
if (employee is Manager) {
projectsLink = manager.getMBAProjects();
} else if (employee is Developer) {
projectsLink = developer.getGithubLink();
}
return CustomCard(
expectedSalary: employee.calculateExpectedSalary(),
experience: employee.getExperience(),
projectsLink: projectsLink,
);
}Flags tell your user that this function does more than one thing. Functions should do one thing. Split out your functions if they are following different code paths based on a boolean.
Bad:
void createFile(String name, bool temp) {
if (temp) {
File('./temp/${name}').create();
} else {
File(name).create();
}
}Good:
void createFile(String name) {
File(name).create();
}
void createTempFile(String name) {
File('./temp/${name}').create();
}A function produces a side effect if it does anything other than take a value in and return another value or values. A side effect could be writing to a file, modifying some global variable, or accidentally wiring all your money to a stranger.
Now, you do need to have side effects in a program on occasion. Like the previous example, you might need to write to a file. What you want to do is to centralize where you are doing this. Don't have several functions and classes that write to a particular file. Have one service that does it. One and only one.
The main point is to avoid common pitfalls like sharing state between objects without any structure, using mutable data types that can be written to by anything, and not centralizing where your side effects occur. If you can do this, you will be happier than the vast majority of other programmers.
Bad:
// Global variable referenced by following function.
// If we had another function that used this name, now it'd be an array and it could break it.
dynamic name = 'Ryan McDermott';
void splitIntoFirstAndLastName() {
name = name.split(' ');
}
splitIntoFirstAndLastName();
print(name); // ['Ryan', 'McDermott'];Good:
List<String> splitIntoFirstAndLastName(name) {
return name.split(' ');
}
final name = 'Ryan McDermott';
final newName = splitIntoFirstAndLastName(name);
print(name); // 'Ryan McDermott';
print(newName); // ['Ryan', 'McDermott'];In Dart, some values are unchangeable (immutable) and some are changeable (mutable). Objects and arrays are two kinds of mutable values so it's important to handle them carefully when they're passed as parameters to a function. A Dart function can change an object's properties or alter the contents of an array which could easily cause bugs elsewhere.
Suppose there's a function that accepts an array parameter representing a
shopping cart. If the function makes a change in that shopping cart array -
by adding an item to purchase, for example - then any other function that
uses that same cart array will be affected by this addition. That may be
great, however it could also be bad. Let's imagine a bad situation:
The user clicks the "Purchase" button which calls a purchase function that
spawns a network request and sends the cart array to the server. Because
of a bad network connection, the purchase function has to keep retrying the
request. Now, what if in the meantime the user accidentally clicks an "Add to Cart"
button on an item they don't actually want before the network request begins?
If that happens and the network request begins, then that purchase function
will send the accidentally added item because the cart array was modified.
A great solution would be for the addItemToCart function to always clone the
cart, edit it, and return the clone. This would ensure that functions that are still
using the old shopping cart wouldn't be affected by the changes.
Two caveats to mention to this approach:
-
There might be cases where you actually want to modify the input object, but when you adopt this programming practice you will find that those cases are pretty rare. Most things can be refactored to have no side effects!
-
Cloning big objects can be very expensive in terms of performance. Luckily, this isn't a big issue in practice because there are great libraries that allow this kind of programming approach to be fast and not as memory intensive as it would be for you to manually clone objects and arrays.
Bad:
void addItemToCart(List<int> cart, int item) {
cart.add(item);
}
final cart = <int>[1, 2];
addItemToCart(cart, 3);
print(cart); // [1, 2, 3]Good:
List<int> addItemToCart(List<int> cart, int item) {
return [...cart, item];
}
final cart = <int>[1, 2];
final newCart = addItemToCart(cart, 3);
print(cart); // [1, 2]
print(newCart); // [1, 2, 3]Dart isn't a functional language in the way that Haskell is, but it has a functional flavor to it. Functional languages can be cleaner and easier to test. Favor this style of programming when you can.
Bad:
final programmerOutput = <Programmer>[
Programmer(name: 'Uncle Bobby', linesOfCode: 500),
Programmer(name: 'Suzie Q', linesOfCode: 1500),
Programmer(name: 'Jimmy Gosling', linesOfCode: 150),
Programmer(name: 'Gracie Hopper', linesOfCode: 1000),
];
var totalOutput = 0;
for (var i = 0; i < programmerOutput.length; i++) {
totalOutput += programmerOutput[i].linesOfCode;
}Good:
final programmerOutput = <Programmer>[
Programmer(name: 'Uncle Bobby', linesOfCode: 500),
Programmer(name: 'Suzie Q', linesOfCode: 1500),
Programmer(name: 'Jimmy Gosling', linesOfCode: 150),
Programmer(name: 'Gracie Hopper', linesOfCode: 1000),
];
final totalOutput = programmerOutput.fold<int>(
0, (previousValue, programmer) => previousValue + programmer.linesOfCode);Bad:
if (programmer.language == 'dart' && programmer.projectsList.isNotEmpty) {
// ...
}Good:
bool isValidDartProgrammer(Programmer programmer) {
return programmer.language == 'dart' && programmer.projectsList.isNotEmpty;
}
if (isValidDartProgrammer(programmer)) {
// ...
}Bad:
bool isFileNotValid(File file) {
// ...
}
if (!isFileNotValid(file)) {
// ...
}Good:
bool isFileValid(File file) {
// ...
}
if (isFileValid(file)) {
// ...
}This seems like an impossible task. Upon first hearing this, most people say,
"how am I supposed to do anything without an if statement?" The answer is that
you can use polymorphism to achieve the same task in many cases. The second
question is usually, "well that's great but why would I want to do that?" The
answer is a previous clean code concept we learned: a function should only do
one thing. When you have classes and functions that have if statements, you
are telling your user that your function does more than one thing. Remember,
just do one thing.
Bad:
class Airplane {
// ...
double getCruisingAltitude() {
switch (type) {
case '777':
return getMaxAltitude() - getPassengerCount();
case 'Air Force One':
return getMaxAltitude();
case 'Cessna':
return getMaxAltitude() - getFuelExpenditure();
}
}
}Good:
class Airplane {
// ...
}
class Boeing777 extends Airplane {
// ...
double getCruisingAltitude() {
return getMaxAltitude() - getPassengerCount();
}
}
class AirForceOne extends Airplane {
// ...
double getCruisingAltitude() {
return getMaxAltitude();
}
}
class Cessna extends Airplane {
// ...
double getCruisingAltitude() {
return getMaxAltitude() - getFuelExpenditure();
}
}Dead code is just as bad as duplicate code. There's no reason to keep it in your codebase. If it's not being called, get rid of it! It will still be safe in your version history if you still need it.
Bad:
Future<void> oldRequest(url) {
// ...
}
Future<void> newRequest(url) {
// ...
}
await newRequest();Good:
Future<void> newRequest(url) {
// ...
}
await newRequest();Unlike other languages, in Dart it is recommended to use getters and setters only when there is some logic before using the attribute. If you just want to get or edit the attribute, don't use them.
Bad:
class BankAccount {
// "_" configure as private
int _balance;
int get balance => _balance;
set balance(int amount) => _balance = amount;
BankAccount({
int balance = 0,
}) : _balance = balance;
}
final account = BankAccount();
account.balance = 100;Good:
class BankAccount {
int balance;
// ...
BankAccount({
this.balance = 0,
// ...
});
}
final account = BankAccount();
account.balance = 100;If a method or attribute has to be accessed only within the class, it must be private.
Bad:
class Employee {
String name;
Employee({required this.name});
}
final employee = Employee(name: 'John Doe');
print(employee.name); // John Doe
employee.name = 'Uncle Bob';
print(employee.name); // Uncle BobGood:
class Employee {
String _name;
Employee({required String name}) : _name = name;
}
final employee = Employee(name: 'John Doe');
print(employee.name); // Can't access outside the class.It allows your code to be expressive, and less verbose. For that reason, I say, use method chaining and take a look at how clean your code will be.
Bad:
class Car {
String make;
String model;
String color;
Car({
required this.make,
required this.model,
required this.color,
});
save() => print('$make, $model, $color');
}
final car = Car(make: 'Ford', model: 'F-150', color: 'red');
car.color = 'pink';
car.save();Good:
class Car {
String make;
String model;
String color;
Car({
required this.make,
required this.model,
required this.color,
});
save() => print('$make, $model, $color');
}
final car = Car(make: 'Ford', model: 'F-150', color: 'red')
..color = 'pink'
..save();As stated famously in Design Patterns by the Gang of Four, you should prefer composition over inheritance where you can. There are lots of good reasons to use inheritance and lots of good reasons to use composition. The main point for this maxim is that if your mind instinctively goes for inheritance, try to think if composition could model your problem better. In some cases it can.
You might be wondering then, "when should I use inheritance?" It depends on your problem at hand, but this is a decent list of when inheritance makes more sense than composition:
- Your inheritance represents an "is-a" relationship and not a "has-a" relationship (Human->Animal vs. User->UserDetails).
- You can reuse code from the base classes (Humans can move like all animals).
- You want to make global changes to derived classes by changing a base class. (Change the caloric expenditure of all animals when they move).
Bad:
class Employee {
String name;
String email;
Employee({
required this.name,
required this.email,
});
// ...
}
// Bad because Employees "have" tax data. EmployeeTaxData is not a type of Employee
class EmployeeTaxData extends Employee {
String ssn;
double salary;
EmployeeTaxData({
required this.ssn,
required this.salary,
required super.name,
required super.email,
});
// ...
}Good:
class EmployeeTaxData {
String ssn;
double salary;
EmployeeTaxData({
required this.ssn,
required this.salary,
});
// ...
}
class Employee {
String name;
String email;
EmployeeTaxData? taxData;
Employee({
required this.name,
required this.email,
});
void setTaxData(String ssn, double salary) {
taxData = EmployeeTaxData(ssn: ssn, salary: salary);
}
// ...
}As stated in Clean Code, "There should never be more than one reason for a class to change". It's tempting to jam-pack a class with a lot of functionality, like when you can only take one suitcase on your flight. The issue with this is that your class won't be conceptually cohesive and it will give it many reasons to change. Minimizing the amount of times you need to change a class is important. It's important because if too much functionality is in one class and you modify a piece of it, it can be difficult to understand how that will affect other dependent modules in your codebase.
Bad:
class UserSettings {
String user;
UserSettings({
required this.user,
});
void changeSettings(Settings settings) {
if (verifyCredentials()) {
// ...
}
}
bool verifyCredentials() {
// ...
}
}Good:
class UserAuth {
String user;
UserAuth({
required this.user,
});
bool verifyCredentials() {
// ...
}
}
class UserSettings {
String user;
UserAuth auth;
UserSettings({
required this.user,
}) : auth = UserAuth(user: user);
void changeSettings(Settings settings) {
if (auth.verifyCredentials()) {
// ...
}
}
}As stated by Bertrand Meyer, "software entities (classes, modules, functions, etc.) should be open for extension, but closed for modification." What does that mean though? This principle basically states that you should allow users to add new functionalities without changing existing code.
Bad:
double getArea(Shape shape) {
if (shape is Circle) {
return getCircleArea(shape);
} else if (shape is Square) {
return getSquareArea(shape);
}
}
double getCircleArea(Shape shape) {
// ...
}
double getSquareArea(Shape shape) {
// ...
}Good:
abstract class Shape {
double getArea();
}
class Circle extends Shape {
@override
double getArea() {
// ...
}
}
class Square extends Shape {
@override
double getArea() {
// ...
}
}
// ...
final area = shape.getArea();This is a scary term for a very simple concept. It's formally defined as "If S is a subtype of T, then objects of type T may be replaced with objects of type S (i.e., objects of type S may substitute objects of type T) without altering any of the desirable properties of that program (correctness, task performed, etc.)." That's an even scarier definition.
The best explanation for this is if you have a parent class and a child class, then the base class and child class can be used interchangeably without getting incorrect results. This might still be confusing, so let's take a look at the classic Square-Rectangle example. Mathematically, a square is a rectangle, but if you model it using the "is-a" relationship via inheritance, you quickly get into trouble.
Bad:
class Rectangle {
double width;
double height;
Rectangle({
this.width = 0,
this.height = 0,
});
// setWidth e setHeight used just for example
void setWidth(double value) => width = value;
void setHeight(double value) => height = value;
double getArea() {
return width * height;
}
}
class Square extends Rectangle {
Square({
super.width = 0,
super.height = 0,
});
@override
void setWidth(double value) {
width = value;
height = value;
}
@override
void setHeight(double value) {
width = value;
height = value;
}
}
final rectangles = [Rectangle(), Rectangle(), Square()];
for (final rectangle in rectangles) {
rectangle.setWidth(4);
rectangle.setHeight(5);
final area = rectangle.getArea();
print(area); // BAD: Returns 25 for Square. Should be 20.
}Good:
abstract class Shape {
double getArea();
}
class Rectangle extends Shape {
double width;
double height;
Rectangle({
required this.width,
required this.height,
});
@override
double getArea() {
return width * height;
}
}
class Square extends Shape {
double length;
Square({
required this.length,
});
@override
double getArea() {
return length * length;
}
}
final rectangles = [
Rectangle(width: 4, height: 5),
Rectangle(width: 4, height: 5),
Square(length: 4),
];
for (final rectangle in rectangles) {
final area = rectangle.getArea();
print(area); // Show the correct values: 20, 20, 16.
}ISP states that "Clients should not be forced to depend upon interfaces that
they do not use". You should always create more specific interfaces instead of creating just a generic interface. In other words, if your class, that implements an interface, uses the famous throw UnimplementedError(), it is probably not respecting the principle.
Bad:
abstract class Book {
int getNumberOfPages();
void download();
}
class EBook implements Book {
@override
int getNumberOfPages() {
// ...
}
@override
String download() {
// ...
}
}
class PhysicalBook implements Book {
@override
int getNumberOfPages() {
// ...
}
@override
void download() {
throw UnimplementedError(); // Physical book doesn't download.
}
}Good:
abstract class Book {
int getNumberOfPages();
}
abstract class DownloadableBook {
void download();
}
class EBook implements Book, DownloadableBook {
@override
int getNumberOfPages() {
// ...
}
@override
void download() {
// ...
}
}
class PhysicalBook implements Book {
@override
int getNumberOfPages() {
// ...
}
}This principle states two essential things:
- High-level modules should not depend on low-level modules. Both should depend on abstractions.
- Abstractions should not depend upon details. Details should depend on abstractions.
You've probably seen an implementation of this principle in the form of Dependency Injection (DI). While they are not identical concepts, DIP keeps high-level modules from knowing the details of its low-level modules and setting them up. It can accomplish this through DI. A huge benefit of this is that it reduces the coupling between modules. Coupling is a very bad development pattern because it makes your code hard to refactor.
Bad:
class InventoryRequester {
void requestItem(item) {
// ...
}
}
class InventoryTracker {
final requester = InventoryRequester(); // InventoryTracker depends on low-level module.
List<String> items;
InventoryTracker({
required this.items,
});
void requestItems() {
for (var item in items) {
requester.requestItem(item);
}
}
}
final inventoryTracker = InventoryTracker(items: ['apples', 'bananas']);
inventoryTracker.requestItems();Good:
class InventoryTracker {
List<String> items;
InventoryRequester requester;
InventoryTracker({
required this.items,
required this.requester,
});
void requestItems() {
for (var item in items) {
requester.requestItem(item);
}
}
}
abstract class InventoryRequester {
void requestItem(item);
}
class InventoryRequesterV1 implements InventoryRequester {
@override
void requestItem(item) {
// ...
}
}
class InventoryRequesterV2 implements InventoryRequester {
@override
void requestItem(item) {
// ...
}
}
// By constructing our dependencies externally and injecting them, we can easily
// substitute our request module for a fancy new one.
final inventoryTracker = InventoryTracker(
items: ['apples', 'bananas'],
requester: InventoryRequesterV2(),
);
inventoryTracker.requestItems();Testing is more important than shipping. If you have no tests or an inadequate amount, then every time you ship code you won't be sure that you didn't break anything. Deciding on what constitutes an adequate amount is up to your team, but having 100% coverage (all statements and branches) is how you achieve very high confidence and developer peace of mind.
Always write tests for every new feature/module you introduce. If your preferred method is Test Driven Development (TDD), that is great, but the main point is to just make sure you are reaching your coverage goals before launching any feature, or refactoring an existing one.
Bad:
import 'package:test/test.dart';
test('String', () {
var string = 'foo,bar,baz';
expect(string.split(','), equals(['foo', 'bar', 'baz']));
string = ' foo ';
expect(string.trim(), equals('foo'));
});Good:
import 'package:test/test.dart';
group('String', () {
test('.split() splits the string on the delimiter', () {
const string = 'foo,bar,baz';
expect(string.split(','), equals(['foo', 'bar', 'baz']));
});
test('.trim() removes surrounding whitespace', () {
const string = ' foo ';
expect(string.trim(), equals('foo'));
});
});Using async/await makes your code simpler and easier to understand.
Bad:
final albumTitle = await client
.get(Uri.parse('https://jsonplaceholder.typicode.com/albums/1'))
.then((response) {
// ...
return title;
});Good:
Future<String> getAlbumTitle() async {
final response = await client
.get(Uri.parse('https://jsonplaceholder.typicode.com/albums/1'));
// ...
return title;
}Thrown errors are a good thing! They mean the runtime has successfully identified when something in your program has gone wrong and it's letting you know by stopping function execution on the current stack, killing the process, and notifying you in the console with a stack trace.
Doing nothing with a caught error doesn't give you the ability to ever fix
or react to said error. Logging the error to the console (log)
isn't much better as often times it can get lost in a sea of things printed
to the console. If you wrap any bit of code in a try/catch it means you
think an error may occur there and therefore you should have a plan,
or create a code path, for when it occurs.
Bad:
try {
functionThatMightThrow();
} catch (error) {
print(error);
}Good:
try {
functionThatMightThrow();
} on Exception catch (e, s) {
// Option 1:
log('Error description...', error: e, stackTrace: s);
// Option 2:
notifyUserOfError(e, s);
// Option 3:
reportErrorToService(e, s);
}Using await within try/catch is way better than future/then. But, if you want to use future/then, remember to handle the errors.
Bad:
functionThatMightThrow().then((value) {
// ...
}).onError((e, s) {
print(e);
});Good:
functionThatMightThrow().then((value) {
// ...
}).onError((e, s) {
// Option 1:
log('Error description...', error: e, stackTrace: s);
// Option 2:
notifyUserOfError(e, s);
// Option 3:
reportErrorToService(e, s);
});Formatting is subjective. Like many rules herein, there is no hard and fast rule that you must follow. The main point is DO NOT ARGUE over formatting. I recommend you to read Effective Dart, there are several rules to be followed, but nothing is mandatory.
Bad:
const DAYS_IN_WEEK = 7;
const Bands = ['AC/DC', 'Led Zeppelin', 'The Beatles'];
void restore_database() {}
class animal {}
typedef predicate<T> = bool Function(T value);Good:
// lowerCamelCase for constant names
const daysInWeek = 7;
const bands = ['AC/DC', 'Led Zeppelin', 'The Beatles'];
// lowerCamelCase for functions
void restoreDatabase() {}
// UpperCamelCase for classes, enum types, typedefs, and type parameters
class Animal {}
typedef Predicate<T> = bool Function(T value);If a function calls another, keep those functions vertically close in the source file. Ideally, keep the caller right above the callee. We tend to read code from top-to-bottom, like a newspaper. Because of this, make your code read that way.
Bad:
class Smartphone {
// ...
String getOS() {
// ...
}
void showPlatform() {
final os = getOS();
final chipset = getChipset();
// ...
}
String getResolution() {
// ...
}
void showSpecifications() {
showPlatform();
showDisplay();
}
String getChipset() {
// ...
}
void showDisplay() {
final resolution = getResolution();
// ...
}
}Good:
class Smartphone {
// ...
void showSpecifications() {
showPlatform();
showDisplay();
}
void showPlatform() {
final os = getOS();
final chipset = getChipset();
// ...
}
String getOS() {
// ...
}
String getChipset() {
// ...
}
void showDisplay() {
final resolution = getResolution();
// ...
}
String getResolution() {
// ...
}
}Comments are an apology, not a requirement. Good code mostly documents itself.
Bad:
List<String> getCitiesNames(List<String> cities) {
// Cities names list
final citiesNames = <String>[];
// Loop through every city
for (final city in cities) {
// Gets only the string before the comma
final filteredCityName = city.split(',')[0];
// Add the filtered city name
citiesNames.add(filteredCityName);
}
// Returns the cities names list
return citiesNames;
}Good:
List<String> getCitiesNames(List<String> cities) {
final citiesNames = <String>[];
for (final city in cities) {
// Gets only the string before the comma
final filteredCityName = city.split(',')[0];
citiesNames.add(filteredCityName);
}
return citiesNames;
}Version control exists for a reason. Leave old code in your history.
Bad:
doStuff();
// doOtherStuff();
// doSomeMoreStuff();
// doSoMuchStuff();Good:
doStuff();Remember, use version control! There's no need for dead code, commented code,
and especially journal comments. Use git log to get history!
Bad:
/**
* 2016-12-20: Removidas monads, não entendia elas (RM)
* 2016-10-01: Melhoria utilizando monads especiais (JP)
* 2016-02-03: Removido checagem de tipos (LI)
* 2015-03-14: Adicionada checagem de tipos (JR)
*/
int combine(int a, int b) {
return a + b;
}Good:
int combine(int a, int b) {
return a + b;
}They usually just add noise. Let the functions and variable names along with the proper indentation and formatting give the visual structure to your code.
Bad:
////////////////////////////////////////////////////////////////////////////////
// Programmer Instantiation
////////////////////////////////////////////////////////////////////////////////
final programmer = Programmer(
name: 'Jack',
linesOfCode: 500,
);
////////////////////////////////////////////////////////////////////////////////
// startProject implementation
////////////////////////////////////////////////////////////////////////////////
void startProject() {
// ...
};Good:
final programmer = Programmer(
name: 'Jack',
linesOfCode: 500,
);
void startProject() {
// ...
};This is also available in other languages:
Brazilian Portuguese: williambarreiro/clean-code-dart-pt
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent