mrvl-88mw30x-firmware-tools

Marvell 88MW300/302 Wi-Fi Microcontroller

Marvell Semiconductor’s 88MW30x is a series of ARM-based microcontroller SoCs.

The 88MW300 contains 4 types of firmware:

boot
appfw -- the focus of this project.
wififw
mcufw

Marvell's official SDK is mostly based on free software. However the final step in the build chain employs a proprietary tool called axf2firmware that converts the app firmware into an undocumented binary format. An excellent, initial investigation of this file format was conducted by Uri Shaked.

This project aims to provide documentation and simple tools for converting the app firmware back to an ELF format, that be loaded into static analysis tools for further investigation.

Tools

axf2firmware replicates its proprietary counterpart.
firmware2elf reconstructs an ELF file.
fwinfo

File format

Firmware files begin with a header. The byte order is Little-Endian.

 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Magic marker: "MRVL"                                          |
|-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|
| Unknown1: 0x2E9CF17B                                          |
|-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|
| Creation time                                                 |
|-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|
| Number of segments                                            |
|-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|
| ELF version                                                   |
|-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|

                        Firmware header
       Note that one tick mark represents one bit position.

 Magic marker: const BYTE[4]
     "MRVL"

 Unknown1: const DWORD
     0x2E9CF17B
     Hardcoded in the official SDK. Might refer to SDK version.

 Creation time: DWORD
     UNIX timestamp (local timezone)

 Number of segments: DWORD
     Number of program segments.
     Must be <= 9.

 ELF version:
     identical to Elf32_EHdr.e_version

This header is followed by N segment headers.

 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Segment type: always 2                                        |
|-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|
| Offset                                                        |
|-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|
| Size                                                          |
|-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|
| Virtual address                                               |
|-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|
| CRC-32 checksum                                               |
|-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-|

                        Segment header
       Note that one tick mark represents one bit position.


 Segment type: DWORD
     Hardcoded as 0x2 in axf2firmware

 Offset: DWORD
     Location of segment data in this file

 Size: DWORD
     Size of segment data.
     Must be divisible by 4.

 Virtual address: DWORD
     Virtual memory address

 Checksum: DWORD
     CRC-32 checksum of the padded data segment.
     This variant of CRC-32:
      * no preset to 0xffffffff (-1)
      * no post-invert

The rest of the firmware file is comprised of the segment data. Note that segments can be padded to align with 4 bytes. Padding value = 0xFF.

Context

I only had very few samples of app firmware available. They all seem to be comprised of 3 segments, corresponding to

Code RAM     @ 0x00100000
Flash Memory @ 0x1F000000
SRAM         @ 0x20000000

"Table 18: System Address Memory Map" in the data sheet might be helpful to further contextualize the data.

Examples

$ bin/fwinfo samples/hello_world.bin

$ bin/firmware2elf samples/hello_world.bin /tmp/out.elf

$ readelf -a /tmp/out.elf

Appendix

Authors

This repository is part of the OpenMiHome project. Authors include:

Wolfgang Frisch (GitHub)

wfr / mrvl-88mw30x-firmware-tools Goto Github PK