This is Airbnb's Ruby Style Guide.
It was inspired by GitHub's guide and Bozhidar Batsov's guide.
Airbnb also maintains a JavaScript Style Guide.
If you want to have your ruby autmatically checked against this styleguide, install rubocop
gem install rubocop
Run it inside a directory that contains ruby:
rubocop
- Whitespace 1. Indentation 1. Inline 1. Newlines
- Line Length
- Commenting 1. File/class-level comments 1. Function comments 1. Block and inline comments 1. Punctuation, spelling, and grammar 1. TODO comments 1. Commented-out code
- Methods 1. Method definitions 1. Method calls
- Conditional Expressions 1. Conditional keywords 1. Ternary operator
- Syntax
- Naming
- Classes
- Exceptions
- Collections
- Strings
- Percent Literals
- Rails 1. Scopes
- Be Consistent
- Translation
-
Use soft-tabs with a two-space indent.[link]
-
Align function parameters either all on the same line or one per line.[link]
# bad def self.create_translation(phrase_id, phrase_key, target_locale, value, user_id, do_xss_check, allow_verification) ... end # good def self.create_translation(phrase_id, phrase_key, target_locale, value, user_id, do_xss_check, allow_verification) ... end # good def self.create_translation( phrase_id, phrase_key, target_locale, value, user_id, do_xss_check, allow_verification ) ... end
-
Indent succeeding lines in multi-line boolean expressions.[link]
# bad def is_eligible?(user) Trebuchet.current.launch?(ProgramEligibilityHelper::PROGRAM_TREBUCHET_FLAG) && is_in_program?(user) && program_not_expired end # good def is_eligible?(user) Trebuchet.current.launch?(ProgramEligibilityHelper::PROGRAM_TREBUCHET_FLAG) && is_in_program?(user) && program_not_expired end
-
Never leave trailing whitespace. [link]
-
When making inline comments, include a space between the end of the code and the start of your comment. [link]
# bad result = func(a, b)# we might want to change b to c # good result = func(a, b) # we might want to change b to c
-
Use spaces around operators; after commas, colons, and semicolons; and around
{
and before}
. [link]sum = 1 + 2 a, b = 1, 2 1 > 2 ? true : false; puts 'Hi' [1, 2, 3].each { |e| puts e }
-
Never include a space before a comma. [link]
result = func(a, b)
-
Do not include space inside block parameter pipes. Include one space between parameters in a block. Include one space outside block parameter pipes. [link]
# bad {}.each { | x, y |puts x } # good {}.each { |x, y| puts x }
-
Do not leave space between
!
and its argument.[link]!something
-
No spaces after
(
,[
or before]
,)
. [link]some(arg).other [1, 2, 3].length
-
Omit whitespace when doing string interpolation.[link]
# bad var = "This #{ foobar } is interpolated." # good var = "This #{foobar} is interpolated."
-
Don't use extra whitespace in range literals.[link]
# bad (0 ... coll).each do |item| # good (0...coll).each do |item|
-
Add a new line after
if
conditions spanning multiple lines to help differentiate between the conditions and the body. [link]if @reservation_alteration.checkin == @reservation.start_date && @reservation_alteration.checkout == (@reservation.start_date + @reservation.nights) redirect_to_alteration @reservation_alteration end
-
Add a new line after conditionals, blocks, case statements, etc.[link]
if robot.is_awesome? send_robot_present end robot.add_trait(:human_like_intelligence)
-
Don’t include newlines between areas of different indentation (such as around class or module bodies). [link]
# bad class Foo def bar # body omitted end end # good class Foo def bar # body omitted end end
-
Include one, but no more than one, new line between methods.[link]
def a end def b end
-
Use a single empty line to break between statements to break up methods into logical paragraphs internally. [link]
def transformorize_car car = manufacture(options) t = transformer(robot, disguise) car.after_market_mod! t.transform(car) car.assign_cool_name! fleet.add(car) car end
-
End each file with a newline. Don't include multiple newlines at the end of a file. [link]
- Keep each line of code to a readable length. Unless you have a reason to, keep lines to fewer than 100 characters. (rationale) [link]
Though a pain to write, comments are absolutely vital to keeping our code readable. The following rules describe what you should comment and where. But remember: while comments are very important, the best code is self-documenting. Giving sensible names to types and variables is much better than using obscure names that you must then explain through comments.
When writing your comments, write for your audience: the next contributor who will need to understand your code. Be generous — the next one may be you!
Portions of this section borrow heavily from the Google C++ and Python style guides.
Every class definition should have an accompanying comment that describes what it is for and how it should be used.
A file that contains zero classes or more than one class should have a comment at the top describing its contents.
# Automatic conversion of one locale to another where it is possible, like
# American to British English.
module Translation
# Class for converting between text between similar locales.
# Right now only conversion between American English -> British, Canadian,
# Australian, New Zealand variations is provided.
class PrimAndProper
def initialize
@converters = { :en => { :"en-AU" => AmericanToAustralian.new,
:"en-CA" => AmericanToCanadian.new,
:"en-GB" => AmericanToBritish.new,
:"en-NZ" => AmericanToKiwi.new,
} }
end
...
# Applies transforms to American English that are common to
# variants of all other English colonies.
class AmericanToColonial
...
end
# Converts American to British English.
# In addition to general Colonial English variations, changes "apartment"
# to "flat".
class AmericanToBritish < AmericanToColonial
...
end
All files, including data and config files, should have file-level comments.
# List of American-to-British spelling variants.
#
# This list is made with
# lib/tasks/list_american_to_british_spelling_variants.rake.
#
# It contains words with general spelling variation patterns:
# [trave]led/lled, [real]ize/ise, [flav]or/our, [cent]er/re, plus
# and these extras:
# learned/learnt, practices/practises, airplane/aeroplane, ...
sectarianizes: sectarianises
neutralization: neutralisation
...
Every function declaration should have comments immediately preceding it that describe what the function does and how to use it. These comments should be descriptive ("Opens the file") rather than imperative ("Open the file"); the comment describes the function, it does not tell the function what to do. In general, these comments do not describe how the function performs its task. Instead, that should be left to comments interspersed in the function's code.
Every function should mention what the inputs and outputs are, unless it meets all of the following criteria:
- not externally visible
- very short
- obvious
You may use whatever format you wish. In Ruby, two popular function documentation schemes are TomDoc and YARD. You can also just write things out concisely:
# Returns the fallback locales for the_locale.
# If opts[:exclude_default] is set, the default locale, which is otherwise
# always the last one in the returned list, will be excluded.
#
# For example:
# fallbacks_for(:"pt-BR")
# => [:"pt-BR", :pt, :en]
# fallbacks_for(:"pt-BR", :exclude_default => true)
# => [:"pt-BR", :pt]
def fallbacks_for(the_locale, opts = {})
...
end
The final place to have comments is in tricky parts of the code. If you're going to have to explain it at the next code review, you should comment it now. Complicated operations get a few lines of comments before the operations commence. Non-obvious ones get comments at the end of the line.
def fallbacks_for(the_locale, opts = {})
# dup() to produce an array that we can mutate.
ret = @fallbacks[the_locale].dup
# We make two assumptions here:
# 1) There is only one default locale (that is, it has no less-specific
# children).
# 2) The default locale is just a language. (Like :en, and not :"en-US".)
if opts[:exclude_default] &&
ret.last == default_locale &&
ret.last != language_from_locale(the_locale)
ret.pop
end
ret
end
On the other hand, never describe the code. Assume the person reading the code knows the language (though not what you're trying to do) better than you do.
Related: do not use block comments. They cannot be preceded by whitespace and are not as easy to spot as regular comments. [link]
# bad
=begin
comment line
another comment line
=end
# good
# comment line
# another comment line
Pay attention to punctuation, spelling, and grammar; it is easier to read well-written comments than badly written ones.
Comments should be as readable as narrative text, with proper capitalization and punctuation. In many cases, complete sentences are more readable than sentence fragments. Shorter comments, such as comments at the end of a line of code, can sometimes be less formal, but you should be consistent with your style.
Although it can be frustrating to have a code reviewer point out that you are using a comma when you should be using a semicolon, it is very important that source code maintain a high level of clarity and readability. Proper punctuation, spelling, and grammar help with that goal.
Use TODO comments for code that is temporary, a short-term solution, or good-enough but not perfect.
TODOs should include the string TODO in all caps, followed by the full name of the person who can best provide context about the problem referenced by the TODO, in parentheses. A colon is optional. A comment explaining what there is to do is required. The main purpose is to have a consistent TODO format that can be searched to find the person who can provide more details upon request. A TODO is not a commitment that the person referenced will fix the problem. Thus when you create a TODO, it is almost always your name that is given.
# bad
# TODO(RS): Use proper namespacing for this constant.
# bad
# TODO(drumm3rz4lyfe): Use proper namespacing for this constant.
# good
# TODO(Ringo Starr): Use proper namespacing for this constant.
- Never leave commented-out code in our codebase. [link]
-
Use
def
with parentheses when there are parameters. Omit the parentheses when the method doesn't accept any parameters.[link]def some_method # body omitted end def some_method_with_parameters(arg1, arg2) # body omitted end
-
Do not use default positional arguments. Use keyword arguments (if available - in Ruby 2.0 or later) or an options hash instead.[link]
# bad def obliterate(things, gently = true, except = [], at = Time.now) ... end # good def obliterate(things, gently: true, except: [], at: Time.now) ... end # good def obliterate(things, options = {}) options = { :gently => true, # obliterate with soft-delete :except => [], # skip obliterating these things :at => Time.now, # don't obliterate them until later }.merge(options) ... end
-
Avoid single-line methods. Although they are somewhat popular in the wild, there are a few peculiarities about their definition syntax that make their use undesirable. [link]
# bad def too_much; something; something_else; end # good def some_method # body end
Use parentheses for a method call:
-
If the method returns a value. [link]
# bad @current_user = User.find_by_id 1964192 # good @current_user = User.find_by_id(1964192)
-
If the first argument to the method uses parentheses.[link]
# bad put! (x + y) % len, value # good put!((x + y) % len, value)
-
Never put a space between a method name and the opening parenthesis.[link]
# bad f (3 + 2) + 1 # good f(3 + 2) + 1
-
Omit parentheses for a method call if the method accepts no arguments.[link]
# bad nil?() # good nil?
-
If the method doesn't return a value (or we don't care about the return), parentheses are optional. (Especially if the arguments overflow to multiple lines, parentheses may add readability.) [link]
# okay render(:partial => 'foo') # okay render :partial => 'foo'
In either case:
-
If a method accepts an options hash as the last argument, do not use
{
}
during invocation. [link]# bad get '/v1/reservations', { :id => 54875 } # good get '/v1/reservations', :id => 54875
-
Never use
then
for multi-lineif/unless
. [link]# bad if some_condition then ... end # good if some_condition ... end
-
Never use
do
for multi-linewhile
oruntil
.[link]# bad while x > 5 do ... end until x > 5 do ... end # good while x > 5 ... end until x > 5 ... end
-
The
and
,or
, andnot
keywords are banned. It's just not worth it. Always use&&
,||
, and!
instead. [link] -
Modifier
if/unless
usage is okay when the body is simple, the condition is simple, and the whole thing fits on one line. Otherwise, avoid modifierif/unless
. [link]# bad - this doesn't fit on one line add_trebuchet_experiments_on_page(request_opts[:trebuchet_experiments_on_page]) if request_opts[:trebuchet_experiments_on_page] && !request_opts[:trebuchet_experiments_on_page].empty? # okay if request_opts[:trebuchet_experiments_on_page] && !request_opts[:trebuchet_experiments_on_page].empty? add_trebuchet_experiments_on_page(request_opts[:trebuchet_experiments_on_page]) end # bad - this is complex and deserves multiple lines and a comment parts[i] = part.to_i(INTEGER_BASE) if !part.nil? && [0, 2, 3].include?(i) # okay return if reconciled?
-
Never use
unless
withelse
. Rewrite these with the positive case first.[link]# bad unless success? puts 'failure' else puts 'success' end # good if success? puts 'success' else puts 'failure' end
-
Avoid
unless
with multiple conditions.[link]# bad unless foo? && bar? ... end # okay if !(foo? && bar?) ... end
-
Avoid
unless
with comparison operators if you can useif
with an opposing comparison operator.[link]# bad unless x == 10 ... end # good if x != 10 ... end # bad unless x < 10 ... end # good if x >= 10 ... end # ok unless x === 10 ... end
-
Don't use parentheses around the condition of an
if/unless/while
. [link]# bad if (x > 10) ... end # good if x > 10 ... end
-
Avoid the ternary operator (
?:
) except in cases where all expressions are extremely trivial. However, do use the ternary operator(?:
) overif/then/else/end
constructs for single line conditionals.[link]# bad result = if some_condition then something else something_else end # good result = some_condition ? something : something_else
-
Use one expression per branch in a ternary operator. This also means that ternary operators must not be nested. Prefer
if/else
constructs in these cases.[link]# bad some_condition ? (nested_condition ? nested_something : nested_something_else) : something_else # good if some_condition nested_condition ? nested_something : nested_something_else else something_else end
-
Avoid multiple conditions in ternaries. Ternaries are best used with single conditions. [link]
-
Avoid multi-line
?:
(the ternary operator), useif/then/else/end
instead. [link]# bad some_really_long_condition_that_might_make_you_want_to_split_lines ? something : something_else # good if some_really_long_condition_that_might_make_you_want_to_split_lines something else something_else end
-
Avoid the use of nested conditionals for flow of control. (More on this.) [link]
Prefer a guard clause when you can assert invalid data. A guard clause is a conditional statement at the top of a function that returns as soon as it can.
The general principles boil down to:
- Return immediately once you know your function cannot do anything more.
- Reduce nesting and indentation in the code by returning early. This makes
the code easier to read and requires less mental bookkeeping on the part
of the reader to keep track of
else
branches. - The core or most important flows should be the least indented.
# bad def compute server = find_server if server client = server.client if client request = client.make_request if request process_request(request) end end end end # good def compute server = find_server return unless server client = server.client return unless client request = client.make_request return unless request process_request(request) end
Prefer
next
in loops instead of conditional blocks.# bad [0, 1, 2, 3].each do |item| if item > 1 puts item end end # good [0, 1, 2, 3].each do |item| next unless item > 1 puts item end
See also the section "Guard Clause", p68-70 in Beck, Kent. Implementation Patterns. Upper Saddle River: Addison-Wesley, 2008, which has inspired some of the content above.
-
Never use
for
, unless you know exactly why. Most of the time iterators should be used instead.for
is implemented in terms ofeach
(so you're adding a level of indirection), but with a twist -for
doesn't introduce a new scope (unlikeeach
) and variables defined in its block will be visible outside it.[link]arr = [1, 2, 3] # bad for elem in arr do puts elem end # good arr.each { |elem| puts elem }
-
Prefer
{...}
overdo...end
for single-line blocks. Avoid using{...}
for multi-line blocks (multiline chaining is always ugly). Always usedo...end
for "control flow" and "method definitions" (e.g. in Rakefiles and certain DSLs). Avoiddo...end
when chaining.[link]names = ["Bozhidar", "Steve", "Sarah"] # good names.each { |name| puts name } # bad names.each do |name| puts name end # good names.each do |name| puts name puts 'yay!' end # bad names.each { |name| puts name puts 'yay!' } # good names.select { |name| name.start_with?("S") }.map { |name| name.upcase } # bad names.select do |name| name.start_with?("S") end.map { |name| name.upcase }
Some will argue that multiline chaining would look okay with the use of
{...}
, but they should ask themselves if this code is really readable and whether the block's content can be extracted into nifty methods. -
Use shorthand self assignment operators whenever applicable.[link]
# bad x = x + y x = x * y x = x**y x = x / y x = x || y x = x && y # good x += y x *= y x **= y x /= y x ||= y x &&= y
-
Avoid semicolons except for in single line class definitions. When it is appropriate to use a semicolon, it should be directly adjacent to the statement it terminates: there should be no space before the semicolon.[link]
# bad puts 'foobar'; # superfluous semicolon puts 'foo'; puts 'bar' # two expressions on the same line # good puts 'foobar' puts 'foo' puts 'bar' puts 'foo', 'bar' # this applies to puts in particular
-
Use :: only to reference constants(this includes classes and modules) and constructors (like Array() or Nokogiri::HTML()). Do not use :: for regular method invocation.[link]
# bad SomeClass::some_method some_object::some_method # good SomeClass.some_method some_object.some_method SomeModule::SomeClass::SOME_CONST SomeModule::SomeClass()
-
Avoid
return
where not required. [link]# bad def some_method(some_arr) return some_arr.size end # good def some_method(some_arr) some_arr.size end
-
Don't use the return value of
=
in conditionals[link]# bad - shows intended use of assignment if (v = array.grep(/foo/)) ... end # bad if v = array.grep(/foo/) ... end # good v = array.grep(/foo/) if v ... end
-
Use
||=
freely to initialize variables. [link]# set name to Bozhidar, only if it's nil or false name ||= 'Bozhidar'
-
Don't use
||=
to initialize boolean variables. (Consider what would happen if the current value happened to befalse
.)[link]# bad - would set enabled to true even if it was false enabled ||= true # good enabled = true if enabled.nil?
-
Avoid using Perl-style special variables (like
$0-9
,$
, etc. ). They are quite cryptic and their use in anything but one-liner scripts is discouraged. Prefer long form versions such as$PROGRAM_NAME
.[link] -
When a method block takes only one argument, and the body consists solely of reading an attribute or calling one method with no arguments, use the
&:
shorthand. [link]# bad bluths.map { |bluth| bluth.occupation } bluths.select { |bluth| bluth.blue_self? } # good bluths.map(&:occupation) bluths.select(&:blue_self?)
-
Prefer
some_method
overself.some_method
when calling a method on the current instance.[link]# bad def end_date self.start_date + self.nights end # good def end_date start_date + nights end
In the following three common cases,
self.
is required by the language and is good to use:- When defining a class method:
def self.some_method
. - The left hand side when calling an assignment method, including assigning
an attribute when
self
is an ActiveRecord model:self.guest = user
. - Referencing the current instance's class:
self.class
.
- When defining a class method:
-
When defining an object of any mutable type meant to be a constant, make sure to call
freeze
on it. Common examples are strings, arrays, and hashes. (More on this.)[link]The reason is that Ruby constants are actually mutable. Calling
freeze
ensures they are not mutated and are therefore truly constant and attempting to modify them will raise an exception. For strings, this allows older versions of Ruby below 2.2 to intern them.# bad class Color RED = 'red' BLUE = 'blue' GREEN = 'green' ALL_COLORS = [ RED, BLUE, GREEN, ] COLOR_TO_RGB = { RED => 0xFF0000, BLUE => 0x0000FF, GREEN => 0x00FF00, } end # good class Color RED = 'red'.freeze BLUE = 'blue'.freeze GREEN = 'green'.freeze ALL_COLORS = [ RED, BLUE, GREEN, ].freeze COLOR_TO_RGB = { RED => 0xFF0000, BLUE => 0x0000FF, GREEN => 0x00FF00, }.freeze end
-
Use
snake_case
for methods and variables. [link] -
Use
CamelCase
for classes and modules. (Keep acronyms like HTTP, RFC, XML uppercase.) [link] -
Use
SCREAMING_SNAKE_CASE
for other constants.[link] -
The names of predicate methods (methods that return a boolean value) should end in a question mark. (i.e.
Array#empty?
).[link] -
The names of potentially "dangerous" methods (i.e. methods that modify
self
or the arguments,exit!
, etc.) should end with an exclamation mark. Bang methods should only exist if a non-bang method exists. (More on this.) [link] -
Name throwaway variables
_
. [link]version = '3.2.1' major_version, minor_version, _ = version.split('.')
-
Avoid the usage of class (
@@
) variables due to their "nasty" behavior in inheritance. [link]class Parent @@class_var = 'parent' def self.print_class_var puts @@class_var end end class Child < Parent @@class_var = 'child' end Parent.print_class_var # => will print "child"
As you can see all the classes in a class hierarchy actually share one class variable. Class instance variables should usually be preferred over class variables.
-
Use
def self.method
to define singleton methods. This makes the methods more resistant to refactoring changes. [link]class TestClass # bad def TestClass.some_method ... end # good def self.some_other_method ... end
-
Avoid
class << self
except when necessary, e.g. single accessors and aliased attributes. [link]class TestClass # bad class << self def first_method ... end def second_method_etc ... end end # good class << self attr_accessor :per_page alias_method :nwo, :find_by_name_with_owner end def self.first_method ... end def self.second_method_etc ... end end
-
Indent the
public
,protected
, andprivate
methods as much the method definitions they apply to. Leave one blank line above and below them.[link]class SomeClass def public_method # ... end private def private_method # ... end end
-
Don't use exceptions for flow of control. [link]
# bad begin n / d rescue ZeroDivisionError puts "Cannot divide by 0!" end # good if d.zero? puts "Cannot divide by 0!" else n / d end
-
Avoid rescuing the
Exception
class. [link]# bad begin # an exception occurs here rescue Exception # exception handling end # good begin # an exception occurs here rescue StandardError # exception handling end # acceptable begin # an exception occurs here rescue # exception handling end
-
Don't specify
RuntimeError
explicitly in the two argument version of raise. Prefer error sub-classes for clarity and explicit error creation.[link]# bad raise RuntimeError, 'message' # better - RuntimeError is implicit here raise 'message' # best class MyExplicitError < RuntimeError; end raise MyExplicitError
-
Prefer supplying an exception class and a message as two separate arguments to
raise
, instead of an exception instance. [link]# bad raise SomeException.new('message') # Note that there is no way to do `raise SomeException.new('message'), backtrace`. # good raise SomeException, 'message' # Consistent with `raise SomeException, 'message', backtrace`.
-
Avoid using rescue in its modifier form. [link]
# bad read_file rescue handle_error($!) # good begin read_file rescue Errno:ENOENT => ex handle_error(ex) end
-
Prefer
map
overcollect
.[link] -
Prefer
detect
overfind
. The use offind
is ambiguous with regard to ActiveRecord'sfind
method -detect
makes clear that you're working with a Ruby collection, not an AR object. [link] -
Prefer
reduce
overinject
. [link] -
Prefer
size
over eitherlength
orcount
for performance reasons.[link] -
Prefer literal array and hash creation notation unless you need to pass parameters to their constructors. [link]
# bad arr = Array.new hash = Hash.new # good arr = [] hash = {} # good because constructor requires parameters x = Hash.new { |h, k| h[k] = {} }
-
Favor
Array#join
overArray#*
for clarity. [link]# bad %w(one two three) * ', ' # => 'one, two, three' # good %w(one two three).join(', ') # => 'one, two, three'
-
Use symbols instead of strings as hash keys. [link]
# bad hash = { 'one' => 1, 'two' => 2, 'three' => 3 } # good hash = { :one => 1, :two => 2, :three => 3 }
-
Relatedly, use plain symbols instead of string symbols when possible.[link]
# bad :"symbol" # good :symbol
-
Use
Hash#key?
instead ofHash#has_key?
andHash#value?
instead ofHash#has_value?
. According to Matz, the longer forms are considered deprecated. [link]# bad hash.has_key?(:test) hash.has_value?(value) # good hash.key?(:test) hash.value?(value)
-
Use multi-line hashes when it makes the code more readable, and use trailing commas to ensure that parameter changes don't cause extraneous diff lines when the logic has not otherwise changed. [link]
hash = { :protocol => 'https', :only_path => false, :controller => :users, :action => :set_password, :redirect => @redirect_url, :secret => @secret, }
-
Use a trailing comma in an
Array
that spans more than 1 line[link]# good array = [1, 2, 3] # good array = [ "car", "bear", "plane", "zoo", ]
-
Prefer string interpolation instead of string concatenation:[link]
# bad email_with_name = user.name + ' <' + user.email + '>' # good email_with_name = "#{user.name} <#{user.email}>"
-
Avoid using
String#+
when you need to construct large data chunks. Instead, useString#<<
. Concatenation mutates the string instance in-place and is always faster thanString#+
, which creates a bunch of new string objects.[link]# good and also fast html = '' html << '<h1>Page title</h1>' paragraphs.each do |paragraph| html << "<p>#{paragraph}</p>" end
-
Use
\
at the end of the line instead of+
or<<
to concatenate multi-line strings. [link]# bad "Some string is really long and " + "spans multiple lines." "Some string is really long and " << "spans multiple lines." # good "Some string is really long and " \ "spans multiple lines."
-
When immediately returning after calling
render
orredirect_to
, putreturn
on the next line, not the same line. [link]# bad render :text => 'Howdy' and return # good render :text => 'Howdy' return # still bad render :text => 'Howdy' and return if foo.present? # good if foo.present? render :text => 'Howdy' return end
If you're editing code, take a few minutes to look at the code around you and determine its style. If they use spaces around all their arithmetic operators, you should too. If their comments have little boxes of hash marks around them, make your comments have little boxes of hash marks around them too.
The point of having style guidelines is to have a common vocabulary of coding so people can concentrate on what you're saying rather than on how you're saying it. We present global style rules here so people know the vocabulary, but local style is also important. If code you add to a file looks drastically different from the existing code around it, it throws readers out of their rhythm when they go to read it. Avoid this.
This style guide is also available in other languages:
Chinese (Simplified): 1c7/ruby-airbnb