Backup of the firmware binary and config files for my Utibots K250VS
If you want to use this for your Ultibots k250vs running a Soothieboard (Atzeeg x5 mini) then you will probably need to change a few things:
gamma_max - set this to your printers max height.
extruder.hotend.steps_per_mm - Unless you are running a Titan Aero extruder you will have to change this to match your setup.
alpha_steps_per_mm - Change this to match the steppers you have. For me I am using a 1.8 degree steppers and the board is set to 1/32
beta_steps_per_mm - Change this to match the steppers you have. For me I am using a 1.8 degree steppers and the board is set to 1/32
gamma_steps_per_mm - Change this to match the steppers you have. For me I am using a 1.8 degree steppers and the board is set to 1/32
panel.click_button_pin - for the life of me I couldn't get my viki 2 to work with the default pin on the board. I think my x5 mini has a bad pin so I had to change it.