An 8 key macro keyboard

• 1x Sparkfun Pro Micro 5v
• 1x Breakaway Headers
• 8x Cherry Key Switches
• 8x Diodes
• 8x Keycaps
• 1x Case

Sparkfun Wishlist: http://sfe.io/w149906](http://sfe.io/w149906

1. Collect all your parts
2. Bend all the diodes - its easier and neater to bend them before
3. Populate the board with all the diodes and then solder them in place - bending the legs out a little will hold the diodes in place until you have a chance to solder them.
4. Solder the headers to the Pro Micro - it is easiest to just solder one or two pins to hold things together loosely.
5. Solder the Pro Micro to the PCB - again, one or two pins
6. Install Pro Micro to PCH and finish soldering all the rest of the pins
7. (optional) If using a plate, install the key switches to the plate
8. Install the switches to the PCB and solder.
9. Install keycaps.
10. Install contraption into case. (STL file in /case)
11. Flash firmware to ProMicro. (Arduino sketch in /firmware)