SNAP(8) - System Manager's Manual
snap - snapshot upgrade tool
snap [-bBcdDehiIkKmMnrRsSuUvWx] [-b [boot device]] [-c [config_file]] [-D [destination]] [-m [machine]] [-M [mirror]] [-V [version]]
snap is a ksh(1) script designed to upgrade an OpenBSD machine to the latest snapshot available. Upgrading from release to release is not supported.
snap checks the `BUILDINFO` file located on the remote mirror, and will warn you if the snapshot is not newer than the currently running version.
By default snap verifies signatures for the set files it downloads. This can be prevented by specifying the -S option, however, skipping verification is very much not recommended!
The options are as follows:
-D destination
Destination directory to place the `.tgz` files.
-S
Skip signature verification. This is not recommended!
-c config_file
Location of configuration file (default is $HOME/.snaprc ).
-e
Extract sets into destination directory and exit. The destination directory can be overwritten by the -D option, or by setting the DST line in $HOME/.snaprc.
-d
Download sets to the destination directory, verify ( -S prevents signature verification) and exit. By default the destination directory is set to /tmp/upgrade
-m machine
Use machine instead of what the `machine` command returns.
-V setversion
Use to specify a specific version of sets. This option will need to be used when there is a version jump, say from 6.0 to 6.1.
-r
Run sysmerge after extracting {x}sets. This option may cause issues if the newer snapshot introduces ABI changes. Not recommended.
-x
Do not extract x11 sets.
-M mirror
Specify which mirror to use.
-I sigfile
Verify integrity of the snap tool. If sigfile is omitted, snap will pull a copy of SHA256.sig from the GitHub page.
-i
Run in interactive mode (has colors).
-n
Force snap to install bsd.mp as /bsd
-k
Only install the kernels and exit.
-B
Prevent snap from making a backup of the kernel files.
-u
Check for update to the snap script.
-U
Download and install the latest version of snap (will overwrite currently installed version). Signature verification is also done.
-b device
Tells snap which device to install bootstrap on.
-R
Reboot after running snap
-h
Help.
$HOME/.last_snap
Contains timestamp of the previous snapshot.
$HOME/.snaprc
Contains configuration options. See SNAPRC for more information on these options.
snap supports the following configuration options via the $HOME/.snaprc file:
INTERACTIVE bool
If true, snap will operate as if -i was specified. Defaults to false.
DST directory
Tells snap where to download the snapshot sets and signature files. Defaults to /tmp/upgrade
EXTRACT_ONLY bool
Tells snap to exit after extracting the sets. Defaults to false.
FTP_OPTS string
Lets you overwrite the options passed to ftp(1). This can be handy if your mirror supports file continuation! Defaults to: " -V ".
See ftp(1) for options.
MERGE bool
Tells snap to merge files in /etc using the sysmerge(8) utility. Defaults to false.
NO_X11 bool
Tells snap to forgo download and extraction of xsets. Defaults to false.
REBOOT bool
Setting this to `true` will cause snap to reboot the system after successful extraction of sets. Defaults to false.
AFTER script
Specifies a script to be copied to /etc/rc.firsttime. The script will then be executed upon successful reboot. Default is not set.
MIRROR string
Defaults to `cdn.openbsd.org`.
To upgrade to the latest snapshot:
$ doas snap
To upgrade to the latest snapshot using an explicit mirror region:
$ doas snap -M cdn.openbsd.org
To upgrade to a snapshot without updating xsets:
$ doas snap -x
A typical ~/.snaprc would look something like this:
INTERACTIVE:true
MERGE:true
AFTER:/etc/after_snap
MIRROR:cdn.openbsd.org
FTP_OPTS:-C -V
Here is an `AFTER` script that makes sure we have the latest devices in /dev, upgrades all the firmware currently installed and upgrades currently installed packages:
#!/bin/sh
(
cd /dev && sh MAKEDEV all
/usr/sbin/fw_update -v
/usr/sbin/pkg_add -uVm # -m is needed to see progress in this context
)
snap can be verified using the signify utility.
untrusted comment: github.com/qbit/snap public key
RWQVGN6sUjQQA5uYpANGLLKQMAERZ43otLePFSVqNFGGtf/qBez7G1WU
https://raw.githubusercontent.com/qbit/snap/master/SHA256.sig
After installing the above public key in /etc/signify/snap.pub and downloading the SHA256.sig file, you can verify snap by running one the following:
Have snap download the SHA256.sig file and run verification:
$ snap -I
Have snap verify a pre-downloaded SHA256.sig file:
$ snap -I SHA256.sig
Manual verification with the signify utility:
$ signify -C -p /etc/signify/snap.pub -x SHA256.sig snap
ftp(1), signify(1), installboot(8), rc(8), release(8), sysmerge(8)
The first version of snap was released in September of 2012.
snap was written by Aaron Bieber <[email protected]>.
OpenBSD 6.3 - September 19, 2012