Raspberry Pi -QNX ( BCM2835 ) QNX Neutrino 6.5.0 sp1 BSP for Raspberry Pi b+ & Raspberry Pi Zero W(bcm2835)

1. Kernel Up & fully functioning
2. Serial Debug
3. Graphics
4. Some Extent SPI Touch screen

Features to be added 1.MMC 2.Ethernet/Wifi

1. Unzip it
2. Create a Empty Project
3. File ->Import -> General -> Existing projects into workspace --> File System ( select the folder)
4. Build it

1. Copy the files of "working_image" to the SD Card.. Connect USB to Serial /TTL adapter . power ON
2. Compiled image will be here BSP_Rasp/images

1. Use the latest Firmware https://github.com/raspberrypi/firmware/tree/master/boot

2. Add the below lines at the end of "Config.txt" File

   enable_uart=1 dtoverlay=pi3-miniuart-bt init_uart_clock=3000000

3. Copy these files from Working_image to SD Card

   kernel.img boot.scr ifs-bcm2835.bin

refer .build file .. ls,uname,sloginfo,kill,date

1. Led-red
2. Led-green
3. egl-gears-lite
4. gf_splash /usr/share/backdrops/1024x768/neutrino_02_1024x768.jpg

Enable Photon ,io-graphics, phfont pls note : QNX stopped supporting photon support on ARM platform..

1. devc-pty
2. bkgdmgr
3. pwm
4. shelf
5. pterm
6. mypro
7. gui-app
8. pfm
9. pv
10. phsutdown
11. phcalc {:height="50%" width="50%"} {:height="50%" width="50%"}

Licensing ( Refer license.txt) Source code is distributed under Apache License. Please Note : Final QNX Image distribution requires run time license for each systems.. contact QNX