A lab report by Vini Tripathii
To submit your lab, clone this repository. You'll need to describe your design, include a video of your paper display in operation, and upload any code you wrote to make it move.
Link to a video of your virbation motor https://drive.google.com/file/d/1npHg6JcDG7O8ynT1hzHeBuNtoNZS7JQp/view?usp=sharing
a. Which color wires correspond to power, ground and signal? The darkest (purple) wire is ground, the middle is power and the lightest(orange) is signal.
a. Which Arduino pin should the signal line of the servo be attached to? It can be attached to any PWM pin (on the Metro Mini, these are Pins # 3, 5, 6, 9, 10, 11). In the following video it is attached to pin 9. https://drive.google.com/file/d/1ZpwHyAdJjGm91cXX1OXmaPtQn2-uUQ4Z/view?usp=sharing
b. What aspects of the Servo code control angle or speed? The position to which the Servo motor is written controls the angle, and the increment controls the speed.
Changing Servo angle & speed Video: https://drive.google.com/file/d/1xrFLwBJinw09dEmouTrUng_vN1UOLawX/view?usp=sharing
a. Make a video of your proto puppet.
a. Make a video of your final design.