usi-systems / libpaxos Goto Github PK

The code was compiled successfully on servers with Ubuntu 16.04 (Xenial).

The install_deps.sh script installs neccessary dependencies for Libpaxos. The script also installs LevelDB, RocksDB and DPDK.

git clone https://github.com/usi-systems/libpaxos.git
cd libpaxos
export LIBPAXOS_SRC=`pwd`
./install_deps.sh

Run the following commands or add them in the .bashrc or .bash_profile

export RTE_SDK=$HOME/libraries/dpdk
export RTE_TARGET=x86_64-native-linuxapp-gcc

These are the basic steps required to compile Libpaxos. Here, we build the executables out of the source code (e.g., the build directory is located at $HOME

mkdir -p $HOME/build/libpaxos
cd $HOME/build/libpaxos
export LIBPAXOS_BIN=$HOME/build/libpaxos
cmake $LIBPAXOS_SRC
make

relocate to the build directory (e.g., $LIBPAXOS_BIN as specified above):

a sample configuration application.conf is included in the top directory of libpaxos.

Usage:

$LIBPAXOS_BIN/caans/sw_coordinator <configuration-file>

e.g.,

$LIBPAXOS_BIN/caans/sw_coordinator $LIBPAXOS_SRC/application.conf

Usage:

$LIBPAXOS_BIN/caans/sw_acceptor <configuration-file> <acceptor-id>

e.g.,

$LIBPAXOS_BIN/caans/sw_acceptor  $LIBPAXOS_SRC/application.conf 0

First, you need to reserve Hugepages and bind a NIC that supports DPDK (you could refer to DPDK documentation or use the script init_dpdk.sh as example.

sudo -E ./init_dpdk.sh

You can configure DPDK Paxos with a number of parameters, such as port-core affinity, worker cores assignment, and burst size, etc. Please refer to the usage of each program for details.

sudo $LIBPAXOS_BIN/dppaxos/dpdk_leader -c ff -n 4  --socket-mem 256
--file-prefix ld --log-level 7 -- \
--rx "(0,0,0)(1,0,0)" --tx "(0,1)(1,1)" --w "2,3,4,5" --pos-lb 43 \
--lpm "192.168.4.0/24=>1;224.0.0.0/4=>2;" \
--bsz "(1,1), (1,1), (1,1)" --msgtype 2 --osd 16 --multi-dbs

or you could use the script

$LIBPAXOS_SRC/start_leader.sh

sudo $LIBPAXOS_BIN/dppaxos/dpdk_acceptor -c ff -n 4  --socket-mem 256
--file-prefix ac --log-level 7 -- \
--rx "(0,0,0)(1,0,0)" --tx "(0,1)(1,1)" --w "2,3,4,5" --pos-lb 43 \
--lpm "192.168.4.0/24=>1;224.0.0.0/4=>2;" \
--bsz "(1,1), (1,1), (1,1)" --msgtype 2 --osd 16 --multi-dbs

or you could use the script

$LIBPAXOS_SRC/start_acceptor.sh

The Replica replicates RocksDB instance, you will need to put a configuration for RocksDB in the directory that you will run the script. A sample configuration is rocksdb.conflocated in $LIBPAXOS_SRC.

$LIBPAXOS_SRC/start_replica.sh

LibPaxos is distributed under the terms of the 3-clause BSD license. LibPaxos has been developed at the Universita` della Svizzera Italiana by [Daniele Sciascia][https://www.linkedin.com/in/daniele-sciascia/?originalSubdomain=ch] and later extended by [Huynh Tu Dang][http://tudang.github.io].