Comments (2)
Hello,
I get this in logs while running tandem for any dataset,
(tandem) pankhuri@pankhuri-GE76-Raider-11UH:~/tandem/tandem$ ./build/bin/tandem_dataset preset=gui result_folder=/home/pankhuri/tandem-dataset/results files=/home/pankhuri/tandem-dataset/euroc_tandem_format/V1_01_easy/images calib=/home/pankhuri/tandem-dataset/euroc_tandem_format/V1_01_easy/camera.txt mvsnet_folder=/home/pankhuri/tandem/tandem/exported/tandem mode=1 loading data from /home/pankhuri/tandem-dataset/euroc_tandem_format/V1_01_easy/images! loading calibration from /home/pankhuri/tandem-dataset/euroc_tandem_format/V1_01_easy/camera.txt! Loading MVSNet from /home/pankhuri/tandem/tandem/exported/tandem/! PHOTOMETRIC MODE WITHOUT CALIBRATION! =============== TANDEM Settings: =============== Setting 'gui': - no real-time enforcing - 2000 active points - 5-7 active frames - 1-6 LM iteration each KF - TSDF fusion: yes - dense tracking on cpu (step=1) - Pangolin - Fullscreen: 0 - Mesh: 1 - Smaller Images: 1 Reading Calibration from file /home/pankhuri/tandem-dataset/euroc_tandem_format/V1_01_easy/camera.txt ... found! Input resolution: 640 480 In: 436.225021 436.225021 310.162763 256.946041 0.000000 Out: Rectify Crop Output resolution: 640 480 finding CROP optimal new model! initial range: x: -0.7181 - 0.7613; y: -0.5949 - 0.5141! iteration 00001: range: x: -0.7145 - 0.7575; y: -0.5949 - 0.5141! iteration 00002: range: x: -0.7109 - 0.7537; y: -0.5949 - 0.5141! iteration 00003: range: x: -0.7109 - 0.7537; y: -0.5919 - 0.5115! iteration 00004: range: x: -0.7109 - 0.7537; y: -0.5890 - 0.5090! iteration 00005: range: x: -0.7109 - 0.7537; y: -0.5890 - 0.5090! Rectified Kamera Matrix: 436.27 0 310.165 0 436.28 256.95 0 0 1 NO PHOTOMETRIC Calibration! Reading Photometric Calibration from file PhotometricUndistorter: Could not open file! set timestamps and exposures to zero! set EXPOSURES to zero! got 2778 images and 0 timestamps and 0 exposures.! ImageFolderReader: got 2778 files in /home/pankhuri/tandem-dataset/euroc_tandem_format/V1_01_easy/images! using pyramid levels 0 to 3. coarsest resolution: 80 x 60! START PANGOLIN! ----DRMVSNET Initalizing fusion---- ----DRMVSNET Initalizing fusion done---- DrMvsnet torch::cuda::is_vailable == true --> seems good View Num: 7, ref index: 5 [W BinaryOps.cpp:467] Warning: floor_divide is deprecated, and will be removed in a future version of pytorch. It currently rounds toward 0 (like the 'trunc' function NOT 'floor'). This results in incorrect rounding for negative values. To keep the current behavior, use torch.div(a, b, rounding_mode='trunc'), or for actual floor division, use torch.div(a, b, rounding_mode='floor'). (function operator()) Correctness: Depth correct : 0, error: 0.0106286 Confidence correct: 1, error: 0.00296125 Correctness: Depth correct : 0, error: 0.0106182 Confidence correct: 1, error: 0.00295481 Correctness: Depth correct : 0, error: 0.0106182 Confidence correct: 1, error: 0.0029548 Correctness: Depth correct : 0, error: 0.0106182 Confidence correct: 1, error: 0.00295482 Correctness: Depth correct : 0, error: 0.0106182 Confidence correct: 1, error: 0.00295482 Correctness: Depth correct : 0, error: 0.0106182 Confidence correct: 1, error: 0.00295482 Correctness: Depth correct : 0, error: 0.0106182 Confidence correct: 1, error: 0.00295482 Correctness: Depth correct : 0, error: 0.0106182 Confidence correct: 1, error: 0.0029548 Correctness: Depth correct : 0, error: 0.0106182 Confidence correct: 1, error: 0.00295482 Performance: CallAsync : 6.655 ms Ready : 0 ms GetResult : 116.791 ms There has been an error. Do not use the model. Couldn't load MVSNet successfully.INITIALIZE FROM INITIALIZER (2043 pts)! TANDEM TIMING: ================== 2777 Frames (11.8 fps) 84.59ms per frame; 234.91s total time; ====================== DrFusion::SaveMeshToFile volume_->ExtractMesh (482 ms) DrFusion::SaveMeshToFile mesh.SaveToFile (17763 ms) Mesh Saving done!
I can see the 3D reconstruction but this error still exists.
I wish to ask:
- Is anyone else also getting the same error? How do we solve this ?
- Is it related to the warning that floor_divide is deprecated?
- I am not getting good results on other custom datasets with tandem, Can this error affect the 3D reconstruction on a custom synthetic dataset?
Thank you,
HI @pankhurivanjani , did you figure this out?
from tandem.
@pankhurivanjani or @pytholic, were either of you able to figure this out? Also currently stuck on trying to figure out why this, coupled with an eventual segmentation fault, is happening...
EDIT: I still get the error message regarding MVSNet, but I was able to generate a mesh regardless after getting past the segmentation fault using the advice here.
from tandem.
Related Issues (20)
- How "Abs" is calculated in Table2?
- RuntimeError: Freezing is currently only implemented for modules for modules in eval mode
- Why there are differences between EuRoC dataset and EuRoC_Tandem_format's camera intrinsic?
- About TSDF Fusion
- cnpy error when i install HOT 2
- Segmentation fault HOT 1
- Saving sparse reconstruction
- cmake error HOT 20
- Install Sophus from thirdparty folder,but compile error HOT 2
- got error when i make the project,the error log as follows HOT 1
- segment fault(core dumped) without any error HOT 1
- How to convert ICL-NUIM to tandem format? HOT 2
- can't find some function in glew when compile tandem_dataset
- Convention of the Coordiante System / Representation of Poses HOT 2
- Illegal instruction (core dumped)
- make error "undefined reference to symbol 'pthread_condattr_setclock@@GLIBC_2.3.3'"
- How to generate scale.txt and tuples_dso_optimization_windows.txt files for custom data? HOT 7
- How do I properly modify the fusion options given scenes with dramatically different depth?
- How to handle scale?
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from tandem.