accZ is always -2.00 on ESP32 about mpu6050_tockn HOT 4 OPEN

Did you check your input voltage ?
Did you check if the mpu is well seen with I2C scanner ?

If yes, did you try to reset the esp ? Each time im using the mpu, the first time im turning on the mpu it's giving me wrong datas but when i reset it, it's working correctly. I didn't find why it's doing that (probably some registers inside the esp or the mpu wich are not going on the same state when turning up and reseting...)

from mpu6050_tockn.

Just checked with a different 5V supply just for the MPU, it's the same.
the I2C communication works, I see all of the other information flow as it supposed to, it's just the accZ.
I'm resetting everything all the time, that's part of the project I'm working on.

I will try to get another gy521 to test it.

from mpu6050_tockn.

I think its supposed to be 3.3V not 5V

from mpu6050_tockn.

Even in 3.3V it is doing the same :(

from mpu6050_tockn.