Omnipod basal settings about happ HOT 5 CLOSED

Hi, can you give more details where the issue is, I have been able to create the following ok...
00:00 0.9
02:00 1.5
05:00 0.85
09:00 0.75
12:00 0.85
21:00 1.00

I was also able to then add a 15:00 slot

Are you able to provide any images of your issue?

from happ.

Yes, I've attached some images, I think that the first detail shows for me, I can only add sequential slots with 30 or 60 minute time slots:

This prevents me from replicating a time slots (as in your example) that last more than a single 30 or 60 minute interval, i.e. it forces me to add the example (if I select 60 minute intervals) as:
00:00 ~00:59
01:00 ~01:59
02:00 ~ 23:59 ... etc.

My issue occurs when I try to add the 15:00 time slot from the individual 60 minute entry series.

Hope this helps illustrate better (thanks for your great work Tim).

from happ.

Hey, great thank you for the extra info.

This may answer the issue you are having...
In the last image you have two time slots
-00:00 ~ 00:59
-01:00 ~ 23:59

The value "00:59" is limited by the next time slot start time "01:00". You can change "01:00" to be any value between 01:00 until 23:29. If you change it to "15:00" you will have these as time slots...
-00:00 ~ 00:59
-15:00 ~ 23:59

Now, "00:59" can be changed to any value from 00:59 until 14:59.

Sorry if you are already aware of this, but want to be sure you understand the logic.

from happ.

Logic understood, the initial time slot range determines the limit (duh!). Thanks for explaining it to me Tim - was not aware (thanks your wonderful work on this project)

from happ.

No problem, thank you for the feedback. Wanted the editor to be as simple as possible but with obvious limits so a useable schedule is always created.
If you think there is any way to make it more clear do let me know

from happ.