tedyu / yb-kafka-connector Goto Github PK

There are two approaches of integrating YugabyteDB with Kafka. Kafka provides Kafka Connect, a connector SDK for building such integrations.

In this approach, the source connector streams table updates in YugabyteDB to Kafka topics. It is based on YugabyteDB's Change Data Capture (CDC) feature. CDC allows the connector to simply subscribe to these table changes and then publish the changes to selected Kafka topics.

More documentation to follow.

In this approach, the sink connector delivers data from Kafka topics into YugabyteDB tables. The connector subscribes to specific topics in Kafka and then writes to specific tables in YugabyteDB as soon as new messages are received in the selected topics.

For building and using this project, we requires following tools pre-installed on the system.

• JDK - 1.8+
• Maven - 3.3+
• Clone this repo into ~/yb-kafka/yb-kafka-connector/ directory.

1. Setup and start Kafka

   • Download the Apache Kafka tarball

     mkdir -p ~/yb-kafka
     cd ~/yb-kafka
     wget http://apache.cs.utah.edu/kafka/2.0.0/kafka_2.11-2.0.0.tgz
     tar -xzf kafka_2.11-2.0.0.tgz
     

     Any latest version can be chosen, this is just as a sample.

   • Start Zookeeper and Kafka server

     ~/yb-kafka/kafka_2.11-2.0.0/bin/zookeeper-server-start.sh config/zookeeper.properties &
     ~/yb-kafka/kafka_2.11-2.0.0/bin/kafka-server-start.sh config/server.properties &
     

   • Create a Kafka topic

     $ ~/yb-kafka/kafka_2.11-2.0.0/bin/kafka-topics.sh --create --zookeeper localhost:2181 --replication-factor 1 --partitions 1 --topic test
     

     This needs to be done only once.

   • Run the following to produce data in that topic:

     $ ~/yb-kafka/kafka_2.11-2.0.0/bin/kafka-console-producer.sh --broker-list localhost:9092 --topic test_topic
     

     Just cut-and-paste the following lines at the prompt:

     {"key" : "A", "value" : 1, "ts" : 1541559411000}
     {"key" : "B", "value" : 2, "ts" : 1541559412000}
     {"key" : "C", "value" : 3, "ts" : 1541559413000}
     

     Feel free to Ctrl-C this process or switch to a different shell as more values can be added later as well to the same topic.

2. Install YugabyteDB and create the keyspace/table.

   • Install YugabyteDB and start a local cluster.

   • Create a keyspace and table by running the following command. You can find cqlsh in the bin subdirectory located inside the YugabyteDB installation folder.

     $> cqlsh
     cqlsh> CREATE KEYSPACE IF NOT EXISTS demo;
     cqlsh> CREATE TABLE demo.test_table (key text, value bigint, ts timestamp, PRIMARY KEY (key));

3. Set up and run the Kafka Connect Sink

   • Setup the required jars needed by connect

     cd ~/yb-kafka/yb-kafka-connector/
     mvn clean install -DskipTests
     cp  ~/yb-kafka/yb-kafka-connector/target/yb-kafka-connnector-1.0.0.jar ~/yb-kafka/kafka_2.11-2.0.0/libs/
     cd ~/yb-kafka/kafka_2.11-2.0.0/libs/
     wget http://central.maven.org/maven2/io/netty/netty-all/4.1.25.Final/netty-all-4.1.25.Final.jar
     wget http://central.maven.org/maven2/com/yugabyte/cassandra-driver-core/3.2.0-yb-18/cassandra-driver-core-3.2.0-yb-18.jar
     wget http://central.maven.org/maven2/com/codahale/metrics/metrics-core/3.0.1/metrics-core-3.0.1.jar
     

   • Finally, run the connect sink in standalone mode:

     ~/yb-kafka/kafka_2.11-2.0.0/bin/connect-standalone.sh ~/yb-kafka/yb-kafka-connector/resources/examples/kafka.connect.properties ~/yb-kafka/yb-kafka-connector/resources/examples/yugabyte.sink.properties 
     

     Note:

     • Setting the bootstrap.servers to a remote host/ports in the kafka.connect.properties file can help connect to any accessible existing Kafka cluster.
     • The keyspace and tablename values in the yugabyte.sink.properties file should match the values in the cqlsh commands in step 5.
     • The topics value should match the topic name from producer in step 6.
     • Setting the yugabyte.cql.contact.points to a non-local list of host/ports will help connect to any remote accessible existing YugaByte DB cluster.

   • Check the console output (optional)

     You should see something like this (relevant lines from YBSinkTask.java) on the console:

     [2018-10-28 16:24:16,037] INFO Start with keyspace=demo, table=test_table (com.yb.connect.sink.YBSinkTask:79)
     [2018-10-28 16:24:16,054] INFO Connecting to nodes: /127.0.0.1:9042,/127.0.0.2:9042,/127.0.0.3:9042 (com.yb.connect.sink.YBSinkTask:189)
     [2018-10-28 16:24:16,517] INFO Connected to cluster: cluster1 (com.yb.connect.sink.YBSinkTask:155)
     [2018-10-28 16:24:16,594] INFO Processing 3 records from Kafka. (com.yb.connect.sink.YBSinkTask:95)
     [2018-10-28 16:24:16,602] INFO Insert INSERT INTO demo.test_table(key,ts,value) VALUES (?,?,?) (com.yb.connect.sink.YBSinkTask:439)
     [2018-10-28 16:24:16,612] INFO Prepare SinkRecord ...
     [2018-10-28 16:24:16,618] INFO Bind 'ts' of type timestamp (com.yb.connect.sink.YBSinkTask:255)
     ...
     

4. Confirm that the rows are in the target table in the YugabyteDB cluster, using cqlsh.

   cqlsh> select * from demo.test_table;
   key | value | ts
   ----+-------+---------------------------------
     A |     1 | 2018-11-07 02:56:51.000000+0000
     C |     3 | 2018-11-07 02:56:53.000000+0000
     B |     2 | 2018-11-07 02:56:52.000000+0000

   Note that the timestamp value gets printed as a human-readable date format automatically.

• Add more data types.
• Add more tests.
• Add restartability.

This software is distributed under an Apache 2.0 license. See the LICENSE.txt file for details.