Comments (9)
lucasimons
commented on September 24, 2024
@eruc Do you have any updates, did you manage to get it working?
from esphome-pipsolar.
syssi
commented on September 24, 2024
I've improved the protocol test YAML. Could you try it another time and provide a new log? Thanks in advance!
https://github.com/syssi/esphome-pipsolar/blob/main/tests/esp8266-test-protocols.yaml
from esphome-pipsolar.
CastiRudolf
commented on September 24, 2024
@syssi I am experiencing the same issue on the same model.
Here is my log output when running the above test
[17:31:33][I][main:424]: Testing PI30/PI30MAX/PI30REVO/PI41 commands...
[17:31:33][I][main:427]: This is the set of commands supported by the pipsolar component!
[17:31:33][D][uart_debug:158]: >>> "QPI\xBE\xAC\r"
[17:31:33][D][uart_debug:158]: <<< "(PI30\x9A\v\r"
[17:31:34][D][uart_debug:158]: >>> "QDIq\e\r"
[17:31:35][D][uart_debug:158]: <<< "(230.0 50.0 0030 42.0 54.0 56.4 46.0 60 0 0 2 0 0 0 0 0 1 1 0 0 1 0 54.0 0 1 000\x9E`\r"
[17:31:35][D][uart_debug:158]: >>> "QFLAG\x98t\r"
[17:31:35][D][uart_debug:158]: <<< "(EkxDabdjlnuvyz\x8D}\r"
[17:31:36][D][uart_debug:158]: >>> "QMN\xBBd\r"
[17:31:36][D][uart_debug:158]: <<< "(MKS2-6000\x10\xD7\r"
[17:31:37][D][uart_debug:158]: >>> "QMODI\xC1\r"
[17:31:37][D][uart_debug:158]: <<< "(L\x06\a\r"
[17:31:38][D][uart_debug:158]: >>> "QPIGS\xB7\xA9\r"
[17:31:39][D][uart_debug:158]: <<< "(222.5 49.9 222.5 49.9 0289 0213 004 401 54.50 000 0038 00.0 000.0 00.00 00000 00010101 00 00 00000 010 0 00 0000O\xE1\r"
[17:31:39][D][uart_debug:158]: >>> "QPIRI\xF8T\r"
[17:31:40][D][uart_debug:158]: <<< "(230.0 26.0 230.0 50.0 26.0 6000 6000 48.0 48.0 48.0 56.5 56.5 9 030 010 0 0 2 9 00 0 0 54.0 0 1 000\x99\xB5\r"
[17:31:40][D][uart_debug:158]: >>> "QPIWS\xB4\xDA\r"
[17:31:40][D][uart_debug:158]: <<< "(100000000000000000000000000000000000\x15\xCF\r"
[17:31:41][D][uart_debug:158]: >>> "QT'\xFF\r"
[17:31:41][D][uart_debug:158]: <<< "(20230102075052\xC4\x16\r"
from esphome-pipsolar.
CastiRudolf
commented on September 24, 2024
I just want to add that currently I am monitoring my inverter with a Raspberry Pi.
I am using the following settings -
qpiri=103
qpiws=40
qmod=5
qpigs=120
Hope this helps :-)
from esphome-pipsolar.
WallK
commented on September 24, 2024
This (and other TWIN models) have longer QPIGS
I've made a change that exists, for example, in pip8048 branch that supports it
Use
external_components:
- source: github://syssi/esphome-pipsolar@pip8048
It works for my PIP6048MT (which is the same as VM3 TWIN)
from esphome-pipsolar.
baturinivan
commented on September 24, 2024
It works for my PIP6048MT (which is the same as VM3 TWIN)
It works for me with VM III Twin (24V, 4.2kW). Failed to compile initially, but after change to idf versus arduino and tweaking with version, this solution is finally working.
from esphome-pipsolar.
Edmondo-diRonza
commented on September 24, 2024
It works for my PIP6048MT (which is the same as VM3 TWIN)
It works for me with VM III Twin (24V, 4.2kW). Failed to compile initially, but after change to idf versus arduino and tweaking with version, this solution is finally working.
Hi, I have an Axpert VMIV Twin (48V, 6KW) with what I believe is the same issue of a long QPIGS response. I tried to use the pip8084 branch, but I encountered an error during compilation. I'm using the recommended version of esp-idf. What kind of tweaks did you make to get it working? Which version? Thank you in advance for helping me.
from esphome-pipsolar.
baturinivan
commented on September 24, 2024
Hi.
Please find below excerpts from my working code:
esp32:
board: esp32dev
framework:
type: esp-idf
version: recommended
external_components:
- source: github://syssi/esphome-pipsolar@pip8048
refresh: 0s
uart:
- id: uart_inv
tx_pin: GPIO1
rx_pin: GPIO3
baud_rate: 2400
pipsolar:
- uart_id: uart_inv
id: inverter0
update_interval: 5s
binary_sensor:
- platform: pipsolar
pipsolar_id: inverter0
add_sbu_priority_version:
name: "inv add_sbu_priority_version"
configuration_status:
name: "inv configuration_status"
scc_firmware_version:
name: "inv scc_firmware_version"
load_status:
name: "inv load_status"
battery_voltage_to_steady_while_charging:
name: "inv battery_voltage_to_steady_while_charging"
charging_status:
name: "inv charging_status"
scc_charging_status:
name: "inv scc_charging_status"
ac_charging_status:
name: "inv ac_charging_status"
charging_to_floating_mode:
name: "inv charging_to_floating_mode"
switch_on:
name: "inv switch_on"
dustproof_installed:
name: "inv dustproof_installed"
silence_buzzer_open_buzzer:
name: "inv silence_buzzer_open_buzzer"
overload_bypass_function:
name: "inv overload_bypass_function"
lcd_escape_to_default:
name: "inv lcd_escape_to_default"
overload_restart_function:
name: "inv overload_restart_function"
over_temperature_restart_function:
name: "inv over_temperature_restart_function"
# backlight_on:
# name: "inv backlight_on"
sensor:
- platform: pipsolar
pipsolar_id: inverter0
# QPIRI
# grid_rating_voltage:
# name: "inv grid_rating_voltage"
# grid_rating_current:
# name: "inv grid_rating_current"
# ac_output_rating_voltage:
# name: "inv ac_output_rating_voltage"
# ac_output_rating_frequency:
# name: "inv ac_output_rating_frequency"
# ac_output_rating_current:
# name: "inv ac_output_rating_current"
# ac_output_rating_apparent_power:
# name: "inv ac_output_rating_apparent_power"
# ac_output_rating_active_power:
# name: "inv ac_output_rating_active_power"
# battery_rating_voltage:
# name: "inv battery_rating_voltage"
battery_recharge_voltage:
name: "inv battery_recharge_voltage"
battery_under_voltage:
name: "inv battery_under_voltage"
battery_bulk_voltage:
name: "inv battery_bulk_voltage"
battery_float_voltage:
name: "inv battery_float_voltage"
# battery_type:
# name: "battery_type"
current_max_ac_charging_current:
name: "inv current_max_ac_charging_current"
current_max_charging_current:
name: "inv current_max_charging_current"
input_voltage_range:
name: "inv input_voltage_range"
output_source_priority:
name: "inv output_source_priority"
charger_source_priority:
name: "inv charger_source_priority"
# parallel_max_num:
# name: "inv parallel_max_num"
machine_type:
name: "inv machine_type"
# topology:
# name: "inv topology"
output_mode:
name: "inv output_mode"
battery_redischarge_voltage:
name: "inv battery_redischarge_voltage"
# pv_ok_condition_for_parallel:
# name: "inv pv_ok_condition_for_parallel"
# pv_power_balance:
# name: "inv pv_power_balance"
# QPIGS
grid_voltage:
name: "inv grid_voltage"
grid_frequency:
name: "inv grid_frequency"
ac_output_voltage:
name: "inv ac_output_voltage"
ac_output_frequency:
name: "inv ac_output_frequency"
ac_output_apparent_power:
name: "inv ac_output_apparent_power"
ac_output_active_power:
name: "inv ac_output_active_power"
output_load_percent:
name: "inv output_load_percent"
bus_voltage:
name: "inv bus_voltage"
battery_voltage:
name: "inv battery_voltage"
id: invvoltage
battery_charging_current:
name: "inv battery_charging_current"
battery_capacity_percent:
name: "inv battery_capacity_percent"
inverter_heat_sink_temperature:
name: "inv inverter_heat_sink_temperature"
# sila, anern 4.2k
#pv_input_current_for_battery:
#name: "inv pv_input_current_for_battery"
#pv_input_voltage:
#name: "inv pv_input_voltage"
# vm III twin (sunlife, twin)
pv1_input_current:
name: "inv pv_input_current_for_battery"
pv1_input_voltage:
name: "inv pv_input_voltage"
battery_voltage_scc:
name: "inv battery_voltage_scc"
battery_discharge_current:
name: "inv battery_discharge_current"
battery_voltage_offset_for_fans_on:
name: "inv battery_voltage_offset_for_fans_on"
eeprom_version:
name: "inv eeprom_version"
pv1_charging_power:
name: "inv pv_charging_power"
text_sensor:
- platform: pipsolar
pipsolar_id: inverter0
device_mode:
name: "inv device_mode"
last_qpigs:
name: "inv last_qpigs"
# last_qpiri:
# name: "inv last_qpiri"
# last_qmod:
# name: "inv last_qmod"
# last_qflag:
# name: "inv last_qflag"
select:
- platform: pipsolar
pipsolar_id: inverter0
output_source_priority:
id: inverter0_output_source_priority_select
name: inverter0_output_source_priority_select
optionsmap:
"Utility first": "POP00"
"Solar only": "POP01"
"Solar Battery Utility": "POP02"
statusmap:
"0": "Utility first"
"1": "Solar only"
"2": "Solar Battery Utility"
- platform: pipsolar
pipsolar_id: inverter0
charging_discharging_control:
# See MAX_Communication_Protocol_20200526.pdf page 18
name: "${name} charging discharging control"
optionsmap:
"111": "PBATCD111"
"011": "PBATCD011"
"101": "PBATCD101"
"110": "PBATCD110"
"010": "PBATCD010"
"100": "PBATCD100"
"001": "PBATCD001"
"000": "PBATCD000"
statusmap:
"111": "111"
"011": "011"
"101": "101"
"110": "110"
"010": "010"
"100": "100"
"001": "001"
"000": "000"
- platform: pipsolar
pipsolar_id: inverter0
charger_source_priority:
name: ${name} charger_source_priority_select
optionsmap:
# "Utility first": "PCP00"
"Solar first": "PCP01"
"Solar and utility": "PCP02"
"Solar charging only": "PCP03"
statusmap:
# "0": "Utility first"
"1": "Solar first"
"2": "Solar and utility"
"3": "Solar charging only"
- platform: pipsolar
pipsolar_id: inverter0
current_max_ac_charging_current:
name: ${name} current_max_ac_charging_current_select
optionsmap:
"2A": "MUCHGC0002"
"10A": "MUCHGC0010"
"20A": "MUCHGC0020"
"30A": "MUCHGC0030"
"40A": "MUCHGC0040"
"50A": "MUCHGC0050"
"60A": "MUCHGC0060"
"70A": "MUCHGC0070"
"80A": "MUCHGC0080"
"90A": "MUCHGC0090"
"100A": "MUCHGC0100"
"110A": "MUCHGC0110"
"120A": "MUCHGC0120"
statusmap:
"2": "2A"
"10": "10A"
"20": "20A"
"30": "30A"
"40": "40A"
"50": "50A"
"60": "60A"
"70": "70A"
"80": "80A"
"90": "90A"
"100": "100A"
"110": "110A"
"120": "120A"
- platform: pipsolar
pipsolar_id: inverter0
current_max_charging_current:
name: ${name} current_max_charging_current_select
optionsmap:
"10A": "MCHGC010"
"20A": "MCHGC020"
"30A": "MCHGC030"
"40A": "MCHGC040"
"50A": "MCHGC050"
"60A": "MCHGC060"
"70A": "MCHGC070"
"80A": "MCHGC080"
"90A": "MCHGC090"
"100A": "MCHGC100"
"110A": "MCHGC110"
"120A": "MCHGC120"
statusmap:
"10": "10A"
"20": "20A"
"30": "30A"
"40": "40A"
"50": "50A"
"60": "60A"
"70": "70A"
"80": "80A"
"90": "90A"
"100": "100A"
"110": "110A"
"120": "120A"
If you are interested in resolution, I think you need to include more info.... at least the error you have received.
from esphome-pipsolar.
Edmondo-diRonza
commented on September 24, 2024
external_components:
- source: github://syssi/esphome-pipsolar@pip8048
refresh: 0s
Hi, sure! Sorry I'm really a newbie at these kinds of problems. I paste the compiler log, made with the home assistant esphome plugin.
logs_esphome-web-57072c_run (1).txt
I'm also posting the ESP32 test protocol log, in case it could be helpful. Thanks.
logs_esphome-web-57072c_logs (3).txt
from esphome-pipsolar.
Related Issues (20)
- Adding external componen not found HOT 4
- MPI 10k integration
- pipsolar ac_output_active_power HOT 1
- Effecta AX-P1 whit USB2.0 typ B COM port HOT 11
- Apiconnectionerror HOT 2
- Inverter Log HOT 1
- Component jk_modbus took a long time for an operation.... and cause esp to halt after sometime HOT 2
- Pipsolar inverter pv1 and pv2 HOT 1
- Hybrid Solar inverter 8.2kw/10.2KW HOT 31
- Change value on QFLAGS status
- New sensors and custom settings on mi invertor Effekta AX- Series HOT 3
- Fronus PV7200 - CRC NOK expected HOT 13
- Axpert_KSMKSV_RS232_Protocol HOT 8
- PIP 8048 zero values HOT 4
- WKS evo cirlce HOT 2
- Eps8266 board NodeMCU V3 can working? HOT 6
- Cannot flash with select battery redischarge, recharge, float HOT 9
- Too many measurment sent to Home Assistant HOT 1
- Beeper switch HOT 4
- 2 PV monitoring HOT 83
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from esphome-pipsolar.