Adding external componen not found about esphome-pipsolar HOT 4 OPEN

A clean build is required. If you use the ESPHome dashboard there should be a clean button somewhere. If you use the CLI:

esphome clean yourconfig.yaml
esphome run yourconfig.yaml

from esphome-pipsolar.

I got it working couple seconds ago with this default yaml

https://github.com/syssi/esphome-pipsolar/blob/pip8048/esp32-example.yaml

But:

pipsolar pv1_input_current 0.0 A pipsolar pv1_input_voltage 112.2 V

Why input current showing 0.0 A im currently using it at 150watts

from esphome-pipsolar.

pipsolar ac_charging_status
wyłączono
pipsolar ac_output_active_power
0,0 W
pipsolar ac_output_apparent_power
0,0 VA
pipsolar ac_output_frequency
49,9 Hz
pipsolar ac_output_voltage
234,9 V
pipsolar add_sbu_priority_version
wyłączono
pipsolar battery_capacity_percent
0,0%
pipsolar battery_charging_current
0,0 A
pipsolar battery_discharge_current
0,0 A
pipsolar battery_voltage
3,3 V
pipsolar battery_voltage_offset_for_fans_on
0,0 V
pipsolar battery_voltage_scc
0,0 V
pipsolar battery_voltage_to_steady_while_charging
wyłączono
pipsolar bus_voltage
395,0 V
pipsolar charging_status
wyłączono
pipsolar charging_to_floating_mode
wyłączono
pipsolar configuration_status
wyłączono
pipsolar device_mode
L
pipsolar grid_frequency
49,9 Hz
pipsolar grid_voltage
234,9 V
pipsolar inverter_heat_sink_temperature
18,0 °C
pipsolar lcd_escape_to_default
włączono
pipsolar load_status
włączono
pipsolar output_load_percent
0,0%
pipsolar over_temperature_restart_function
wyłączono
pipsolar overload_bypass_function
wyłączono
pipsolar overload_restart_function
wyłączono
pipsolar pv1_charging_power
1,0 W
pipsolar pv1_input_current
0,0 A
pipsolar pv1_input_voltage
117,0 V
pipsolar pv2_charging_power
nieznany
pipsolar pv2_input_current
nieznany
pipsolar pv2_input_voltage
nieznany
pipsolar scc_charging_status
wyłączono
pipsolar silence_buzzer_open_buzzer
włączono
pipsolar switch_on
włączono

from esphome-pipsolar.

Its a hybrid inventer working without battery, do i need battery to show wattage from pv ?

from esphome-pipsolar.