sunoo / homebridge-dafang-mqtt-republish Goto Github PK
View Code? Open in Web Editor NEWExposes Dafang Hacks Features as HomeKit Accessories
License: BSD 2-Clause "Simplified" License
Exposes Dafang Hacks Features as HomeKit Accessories
License: BSD 2-Clause "Simplified" License
Hi all,
I am a complete newbie and I need help. My goal is to receive a notification when the camera detects a motion so I can use it for automations.
I installed the firmware for the Wyze V2 camer and I am able to access in using the local IP address. I set it up as explained here: https://github.com/sahilchaddha/homebridge-dafang/blob/master/Setup_MQTT.md. I also have this plugin installed and configured.
Do I need a separate MQTT broker install? I do have MQTT-Things installed but have no idea how to configure it.
Any help would be appreciated. Thank you!
Hi, I'm having serious problems with rtsp service on Xiaomi Xiaofang 1S. Rtsp service suddenly gets killed, the only way to get it work again is rebooting or restarting rtsp process login at camera web UI.
It will be helpful if you implement some "Accessories" like it's done on homebridge-dafang plugin, like "remountSwitch", ""resetFFMPEG", "rtspSwitch" and "restartSwitch". With that implemented you can add an automation at Home app, so like every 3 hours, rtsp service is restarted.
It seems it's the only solution for rtsp service issue.
Thanks in advance
I recently found this plugin after using the "Homebridge Dafang" plugin for a while now. It's been pretty reliable for me despite a few quirks. Unfortunately, it looks like it has been abandoned.
I did notice that in Homebridge Dafang, you can set where your snapshots and videos are saved to. For instance, I was saving my files to my icloud drive. In homebridge-dafang-mqtt-republish, there doesn't seem to be this setting and will save recordings onto the sdcard. I have no idea where snapshots are saved to.
Is there a setting where I can set where snapshots and recordings are saved to and I just missed it?
Thank you!
Hi, I've installed this hack successfully for both Xiaofang and Dafang. However, despite troubleshooting and opening tickets to Dafang Hacks (not getting response), I'm still not getting any motion detection notification on the Home app.
I have enabled Motion -MQTT Message, enabled notification on the Home app. When I run mosquitto_sub -v -t '#' command I believe the motion was recognized by the camera.
I'm really stuck here, as these cameras were recently blocked by Xiaomi due to geographical restrictions :(
I've followed the same config as stated, enabled notifications for this device on my phone, but I'm not getting any notification for motion detection despite having it turned on via camera's IP site.
I also found this toggle refused to turn on. After I turned it on, it goes back off again after refreshing the page.
Could you add a "recalibrate" accessory switch, that would run "/cgi-bin/action.cgi?cmd=motor_calibrate" on the camera?
I'm seeing this in my log, and camera MQTT events aren't working:
3/9/2021, 8:17:14 AM [Dafang MQTT] Initializing dafangMqtt platform... 3/9/2021, 8:17:14 AM [Dafang MQTT] Configuring "GarageCam" on topic "yonder-alerts/garagecam". 3/9/2021, 8:17:14 AM [Dafang MQTT] Configuring "GateCam" on topic "yonder-alerts/gatecam". 3/9/2021, 8:17:14 AM [Dafang MQTT] WARNING: Multiple cameras named "GateCam" configured. Only the first loaded will function. 3/9/2021, 8:17:14 AM [Dafang MQTT] WARNING: Multiple cameras with topic "yonder-alerts/gatecam" configured. Only the first loaded will function. 3/9/2021, 8:17:14 AM [Dafang MQTT] There was error with the config so this camera was ignored. 3/9/2021, 8:17:14 AM [Dafang MQTT] Configuring "DoorbellCam" on topic "yonder-alerts/doorbellcam". 3/9/2021, 8:17:14 AM [Dafang MQTT] WARNING: Multiple cameras named "DoorbellCam" configured. Only the first loaded will function. 3/9/2021, 8:17:14 AM [Dafang MQTT] WARNING: Multiple cameras with topic "yonder-alerts/doorbellcam" configured. Only the first loaded will function. 3/9/2021, 8:17:14 AM [Dafang MQTT] There was error with the config so this camera was ignored. 3/9/2021, 8:17:14 AM [Dafang MQTT] Configuring "StudyCam" on topic "yonder-alerts/studycam". 3/9/2021, 8:17:14 AM [Dafang MQTT] WARNING: Multiple cameras named "StudyCam" configured. Only the first loaded will function. 3/9/2021, 8:17:14 AM [Dafang MQTT] WARNING: Multiple cameras with topic "yonder-alerts/studycam" configured. Only the first loaded will function. 3/9/2021, 8:17:14 AM [Dafang MQTT] There was error with the config so this camera was ignored.
Each camera is defined exactly once in the dafangMqtt section and in the Camera-ffmpeg sections of config.json. I've tried deleting everything in the "accessories" directory, and there are no duplicates in the "persist" directory. Where else do I need to look?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.