suan / liblgtv_serial Goto Github PK

Great job on this! I noticed that the toggle commands are only performing the first command of the two provided commands. I would be happy to help troubleshoot this

Hello everybody,
finding RS232 codes for screen control is often hard.
So I've made a GitHub repo to make it accessible by everybody : https://github.com/YooUp/RS232-Monitor-Commands
The idea is to centralize all the known RS232 commands for all the screens on the market.
18 Screens are currently supported.
Please share this link, so other people can contribute.

Was wondering if LG model 55LN5100 could be added/is compatible?
Manual link below. Commands seem to be standard-ish, but even after adding the model number to the 'LK450_etc' group which at least let me try to issue generic power on/off and input commands, the response to every command is 'none'.
The manual specified for this model covers somewhat of a swath, and it doesn't seem to refer to this model specifically. However, it does still have the 'service only' jack on the side, so I can only assume it's good for something. I'm willing to try just about anything, and I have just about every kind of adapter you could think of. I've used two different types of USB to serial adapters as well as an Arduino as a serial adapter which lets me switch the Tx/Rx pins.

http://www.lg.com/us/lgecs.downloadFile.ldwf?DOC_ID=KROWM000560756&what=MANUAL&fromSystem=LG.COM&fileId=KROWM000560756.pdf&ORIGINAL_NAME_b1_a1=MFL67651192_04%2Brs.pdf