Comments (6)
starryalley
commented on August 14, 2024
That's a good idea. Last week I just integrated SammysHP's stepped tint ramping to this fork and found it very useful.
In a normal smooth ramping (option 0), it currently has shortcut to go to middle tint (8H). Maybe I'll add another shortcut to go to both extremes. 8H doesn't sound like a "short"cut but I can't find anything with less clicks. I'll see.
from anduril2.
starryalley
commented on August 14, 2024
I've thought about this:
- in normal mode (emitters on),
5Cto go to tint edge, and then5Cto go to the other edge.5Cis already used in candle, lightning and fireworks mode so this instant channel switching won't work in those strobe modes. 8Hto go to middle tint (already there). This works in all modes including strobe modes.
I can't use 3C because 3C is already defined in strobe mode to go to the previous mode, and in normal (steady) mode 3C is used to increase brightness by 1 step.
This goes along with smooth tint ramping or the stepped tint ramping. No matter what tint ramping style you are in. It will also work if you set the tint style to 1-mode (middle tint) only. (3H again and it will revert to middle tint in that case)
I can't decide if I should swap the functionality of 3C and 5C based on what's used more often. I've got 3 tint ramping lights now so it is getting used a bit more and more for myself.
I hope this works. Let me know what's your thoughts?
from anduril2.
webshadow
commented on August 14, 2024
From the top of my head i'd say 5C sounds good, having ICS in the strobe
modes seems a little overkill.
Mark Kuo ***@***.***> schrieb am Mo. 20. Feb. 2023 um 05:44:
… I've thought about this:
- in normal mode (emitters on), 5C to go to tint edge, and then 5C to
go to the other edge. 5C is already used in candle, lightning and
fireworks mode so this instant channel switching won't work in those strobe
modes.
- 8H to go to middle tint (already there). This works in all modes
including strobe modes.
I can't use 3C because 3C is already defined in strobe mode to go to the
previous mode, and in normal (steady) mode 3C is used to increase
brightness by 1 step.
This goes along with smooth tint ramping or the stepped tint ramping. No
matter what tint ramping style you are in. It will also work if you set the
tint style to 1-mode (middle tint) only. (3H again and it will revert to
middle tint in that case)
I can't decide if I should swap the functionality of 3C and 5C based on
what's used more often. I've got 3 tint ramping lights now so it is getting
used a bit more and more for myself.
I hope this works. Let me know what's your thoughts?
—
Reply to this email directly, view it on GitHub
<#9 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AFCD7EXRD2LJBLJFSVKQROLWYLZB7ANCNFSM6AAAAAAVA6KF4A>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
from anduril2.
webshadow
commented on August 14, 2024
Perhaps you could get rid of 3C in normal mode if the ramping had a
logarithmic function (configurable in ramp conf), that is fine at the
beginning and getting more coarse to the end.
Henning Krause ***@***.***> schrieb am Di. 21. Feb. 2023 um 09:32:
… From the top of my head i'd say 5C sounds good, having ICS in the strobe
modes seems a little overkill.
Mark Kuo ***@***.***> schrieb am Mo. 20. Feb. 2023 um 05:44:
> I've thought about this:
>
> - in normal mode (emitters on), 5C to go to tint edge, and then 5C to
> go to the other edge. 5C is already used in candle, lightning and
> fireworks mode so this instant channel switching won't work in those strobe
> modes.
> - 8H to go to middle tint (already there). This works in all modes
> including strobe modes.
>
> I can't use 3C because 3C is already defined in strobe mode to go to the
> previous mode, and in normal (steady) mode 3C is used to increase
> brightness by 1 step.
>
> This goes along with smooth tint ramping or the stepped tint ramping. No
> matter what tint ramping style you are in. It will also work if you set the
> tint style to 1-mode (middle tint) only. (3H again and it will revert to
> middle tint in that case)
>
> I can't decide if I should swap the functionality of 3C and 5C based on
> what's used more often. I've got 3 tint ramping lights now so it is getting
> used a bit more and more for myself.
>
> I hope this works. Let me know what's your thoughts?
>
> —
> Reply to this email directly, view it on GitHub
> <#9 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AFCD7EXRD2LJBLJFSVKQROLWYLZB7ANCNFSM6AAAAAAVA6KF4A>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
from anduril2.
starryalley
commented on August 14, 2024
5C shortcut to go to tint edges is included in the latest release
I'll think about that log ramp thing. Sounds like a good one but maybe not practical at mid to higher brightness range?
from anduril2.
starryalley
commented on August 14, 2024
I'll close this one and track the log ramp thing in #11 . Thanks for this great idea. I'm using 5C a lot on my 3 dual channel lights.
from anduril2.
Related Issues (20)
- IDEA: logarithmic ramping for brightness
- Maybe add low/high blinking modes to AUX (currently in indicator lights for TS10)
- add build target for lights that don't have AUX HOT 1
- Lighthouse beacon mode HOT 1
- IDEA: make tint ramp speed configurable HOT 4
- Main Emitter flashes when leaving lockout with 3C or when locking while main is off. HOT 1
- Support old D4v2 with the red driver HOT 2
- Add broken fluorescent light flickering in strobe mode HOT 1
- PWM dithering for smoother tint ramping at low brightness
- Channel switching strobe modes have issues at ramp levels >130 HOT 5
- K9.3/DM1.12 support HOT 11
- TS10 momentary 8C HOT 3
- Wurkkos TS11 / TS25 support HOT 8
- Rgb switch off and memorized HOT 2
- RGB button independent control HOT 3
- TS25 doesn't have button light so shouldn't have all 6C modes HOT 4
- Feature request: Allow indicator light mix (high/low?) with candle mode HOT 11
- Issues or probably a function in 3H? HOT 2
- Request: Support for new Wurkkos TS10 with RGB aux HOT 4
- IDEA: shortcut to specific brightness
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from anduril2.