Comments (11)
Thank you for the report and test.
Actually I don't have a D4sV2 so this mod isn't tested or even considered for D4sV2. Did you build the hex by yourself? The emisar-d4sv2-tintramp* hex is for my D4V2 tint ramping lights since they came preinstalled with this variant.
I'll try to see if there is anything missing there.
from anduril2.
That's a good finding. Can you try with stock Anduril2 firmware (latest) and the same battery fully charged? I've compared the config it is basically the same as stock near the top of the ramp (I've modified a bit in the lowest few levels in the ramp).
How about using the non-fet firmware, is everything good then?
from anduril2.
Added that hex back into the latest release :)
from anduril2.
My D4SV2 came with "0136 emisar-d4sv2-tintramp-fet " so I thought your hex file may fits also... I mean everything is working perfect except of this bug..
Maybe I find some time to dig deeper into all of this - and build the right one.
from anduril2.
I just took a look at the cfg and I couldn't see why this happens. Are you using anduril.emisar-d4sv2-tintramp-fet.hex? If so, can you try using the non-fet version? I actually don't have anything that runs tintramp-fet so I probably shouldn't have included it in the release.
Does 2C from ramp goes to level 150 or 130 in your light? Maybe 2C from off and 2C from on go to different levels in your light and one of the level's config is wrong. I also have no idea if fet enabled tint ramping lights' drivers are the same as my non-fet tint ramping ones. My guess is maybe they are also the same, just that mine has fet disabled in the firmware because mine has E21a and 219b LEDs. But maybe I'm wrong.
Sorry can't help here since I don't have a D4SV2. Please let me know if you also find something. Thank you.
from anduril2.
I got it more figured out what's the issue.
If I my battery is fully charged or above 90% - I have this error (XTAR 26650 5200mAh).
But as soon as the level reaches 90% or lower everything is working perfect.
Strange...
from anduril2.
@starryalley With both versions the same Bug, with a full charged battery (Non-fet, -fet).
I compared the "anduril.2021-12-13.emisar-d4sv2-tintramp-fet.hex" to them which don't have that bug, but:
There is a difference in the behavior with 2C from OFF to Turbo to your Versions: it first turns on with a lower brightness for a half second and then it goes to the full power.
I could imagine that this level step is required for some reason.
from anduril2.
Sorry but I revisited this issue today and I couldn't find anything in the code that can turns on with a lower brightness for 0.5s and then goes to full power (FET). Maybe I didn't look very carefully.
Without the actual hardware it's really hard to debug. I excluded the -fet build in today's release so maybe one day when I feel like getting a D4sv2, I will check this.
from anduril2.
@starryalley I think you should not exclude this build - it's not that big of an problem. And I really like your version even with this little bug.
from anduril2.
OMG - somehow the issue is solved with the new version - I don't know if you really changed nothing - but it's gone... 👍
from anduril2.
Haha good to hear. I didn't change anything specific to this build. Let's close this unless you see this again. Thanks for the bug report!
from anduril2.
Related Issues (20)
- IDEA: logarithmic ramping for brightness
- Maybe add low/high blinking modes to AUX (currently in indicator lights for TS10)
- add build target for lights that don't have AUX HOT 1
- Lighthouse beacon mode HOT 1
- IDEA: make tint ramp speed configurable HOT 4
- Main Emitter flashes when leaving lockout with 3C or when locking while main is off. HOT 1
- Support old D4v2 with the red driver HOT 2
- Add broken fluorescent light flickering in strobe mode HOT 1
- PWM dithering for smoother tint ramping at low brightness
- Channel switching strobe modes have issues at ramp levels >130 HOT 5
- K9.3/DM1.12 support HOT 11
- TS10 momentary 8C HOT 3
- Wurkkos TS11 / TS25 support HOT 8
- Rgb switch off and memorized HOT 2
- RGB button independent control HOT 3
- TS25 doesn't have button light so shouldn't have all 6C modes HOT 4
- Feature request: Allow indicator light mix (high/low?) with candle mode HOT 11
- Issues or probably a function in 3H? HOT 2
- Request: Support for new Wurkkos TS10 with RGB aux HOT 4
- IDEA: shortcut to specific brightness
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from anduril2.