import roomsimove_single
# Create an interface. RIRs are not yet generated
rir_if = roomsimove_single.RandomRIR(sampling_rate=16000)
# Supports multiple sources. Each source is placed in a random position inside the same room.
src = [np.random.rand(10000), np.random.rand(10000)] 
# Support multiple microphones. Position of each device is also random.
# Minimum distance between each element (mics or sources) is 0.5 meters
rev_sig = rir_if.reverberate(src, mic_cnt=2)
# rev_sig contains a list of reverberate sources. 
# Each element in the list is of dimension [src_len x mic_cnt]

python roomsimove_single.py config_file source_pos_x source_pos_y source_pos_z output_file

The help options will also give the details
python roomsimove_single.py -h

using config_file
-----------------
import roomsimove_single
sim_rir = roomsimove_single.RoomSim.init_from_config_file(config_file)
source_pos = [1, 1, 1]
rir = sim_rir.create_rir(source_pos)

using default values of absorption coeffecients
-----------------------------------------------
import roomsimove_single
room_dim = [4.2, 3.4, 5.2]
room = roomsimove_single.Room(room_dim)
mic_pos = [2, 2, 2]
mic1 = roomsimove_single.Microphone(mic_pos, 1,  \
        orientation=[0.0, 0.0, 0.0], direction='omnidirectional'):
mic_pos = [2, 2, 1]
mic2 = roomsimove_single.Microphone(mic_pos, 2,  \
        orientation=[0.0, 0.0, 0.0], direction='cardioid'):
mics = [mic1, mic2]
sample_rate = 16000
sim_rir = roomsimove_single.RoomSim(sample_rate, room, mics, RT60=0.3)
source_pos = [1, 1, 1]
rir = sim_rir.create_rir(source_pos)

# Applying RIR to data
import fftfilt
import soundfile as sf
# Assuming single channel data
[data, fs] = sf.read(wav_file)
reverb_data = fftfilt.fftfilt(rir,data)