Airthings Wave is a smart Radon detector, including sensors for temperature and humidity measurements. Additionally, you can simply wave in front of the device to get a visual indication of your radon levels.

This is a project to provide users a starting point (read_wave.py and read_wave2.py) to read current sensor values from the 1st and 2nd generation Airthings Wave devices using a Raspberry Pi 3 Model B over Bluetooth Low Energy (BLE).

Table of contents

• Airthings Wave Sensor Reader
• Requirements
  • Setup Raspberry Pi
  • Turn on the BLE interface
  • Installing linux and python packages
  • Downloading script
• Usage
• Sensor data description
• Contribution
• Release notes

The following tables shows a compact overview of dependencies for this project.

List of OS dependencies

List of linux/raspberry dependencies

List of third-party Python dependencies

The first step is to setup the Raspberry Pi with Raspbian. An installation guide for Raspbian can be found on the Raspberry Pi website. In short: download the Raspbian image and write it to a micro SD card.

To continue, you need access to the Raspberry Pi using either a monitor and keyboard, or by connecting through WiFi or ethernet from another computer. The latter option does not require an external screen or keyboard and is called “headless” setup. To access a headless setup, you must first activate SSH on the Pi. This can be done by creating a file named ssh in the boot partition of the SD card. Connect to the Pi using SSH from a command line interface (terminal):

$ ssh [email protected]

The default password for the pi user is raspberry.

In the terminal window on your Raspberry Pi:

pi@raspberrypi:~$ bluetoothctl
[bluetooth]# power on
[bluetooth]# show
[bluetooth]# exit

After issuing the command show, a list of bluetooth settings will be printed to the Raspberry Pi terminal window. Look for Powered: yes.

Raspbian images usually comes with Python (2 and/or 3) pre-installed.

pi@raspberrypi:~$ python2 --version
pi@raspberrypi:~$ python3 --version

Install dependencies:

pi@raspberrypi:~$ sudo apt-get update && sudo apt-get install libglib2.0-dev git
# For Python 2
pi@raspberrypi:~$ sudo apt-get install python-pip 
pi@raspberrypi:~$ sudo pip2 install bluepy==1.3.0
# For python 3
pi@raspberrypi:~$ sudo apt-get install python3-pip
pi@raspberrypi:~$ sudo pip3 install bluepy==1.3.0

Downloading using git:

pi@raspberrypi:~$ sudo git clone https://github.com/Airthings/wave-reader.git

Downloading using wget:

pi@raspberrypi:~$ wget https://raw.githubusercontent.com/Airthings/wave-reader/master/read_wave.py

The general format for calling the scripts is as follows:

# For 1st Gen Wave
sudo python read_wave.py SERIAL_NUMBER SAMPLE_PERIOD [> somefile.txt]
# For 2nd Gen Wave
sudo python read_wave2.py SERIAL_NUMBER SAMPLE_PERIOD [> somefile.txt]

After a short delay, the script will print the current sensor values to the Raspberry Pi terminal window. Optionally, you may pipe the readings to a text-file using > somefile.txt. Exit the script using Ctrl+C.

Example output of a 1st Gen Wave device:

Timestamp: 2020-02-10 10:14:32, Humidity: 21.5 %rH, Temperature: 22.8 *C, Radon STA: 36 Bq/m3, Radon LTA: 27 Bq/m3
Timestamp: 2020-02-10 10:20:48, Humidity: 21.5 %rH, Temperature: 22.8 *C, Radon STA: 36 Bq/m3, Radon LTA: 27 Bq/m3
Timestamp: 2020-02-10 10:25:58, Humidity: 21.5 %rH, Temperature: 22.9 *C, Radon STA: 36 Bq/m3, Radon LTA: 27 Bq/m3
Timestamp: 2020-02-10 10:30:10, Humidity: 21.5 %rH, Temperature: 22.9 *C, Radon STA: 36 Bq/m3, Radon LTA: 27 Bq/m3
Timestamp: 2020-02-10 10:35:20, Humidity: 21.5 %rH, Temperature: 22.8 *C, Radon STA: 36 Bq/m3, Radon LTA: 27 Bq/m3

Note: The scripts require that your device is advertising. If your device is paired/connected to e.g. a phone, you need to turn off bluetooth on your phone while using the scripts.

Note on choosing a sample period: On 1st Gen Wave, temperature and humidity are updated every time we read the wave. On 2nd Gen Wave, temperature and humidity are updated every 5 minutes. On both devices, radon measurements are updated once every hour.

Let us know how it went! If you want contribute, you can do so by posting issues or suggest enhancement here.

Release dated 10-Feb-2020

• Added read_wave2.py to support 2nd Gen wave devices
• Added py3 compatibility
• Removed tableprint dependency so all py3 versions can be used
• Removed redundant positional argument pipe (since tableprint is removed)
• Updated bluepy version dependency from 1.2.0 to 1.3.0

Release dated 14-Dec-2018

• Added SAMPLE-PERIOD as an input argument.

Initial release 13-Dec-2018