Board issues about xbee_explorer_serial HOT 7 CLOSED

3)Already had these on Measures layer - Bob didn't want dimensions on tDocu, right?
5) What do you mean by standard labeling?

from xbee_explorer_serial.

3. Sorry, I just noticed that. I agree that those dimensions should be on the measures layer (47), not tdocu. (I'll update that verbage into the QC checklist repo in a minute)

4. Sorry to use the word "standard" because this hasn't been defined yet. But I would like to see all jumpers be labeled with 3 text objects. One to designate what you can adjust, and one on each side designating the selection. If it's super tight, then you have to get creative like Grusin did on his lightning sensor

So for this board, I think it'd be great to space them out a bit so you have room to clearly label each side of the jumper.

PS thanks for all your work on this :)

from xbee_explorer_serial.

Awesome, thank you for clarifying. :) Fixed these and will push momentarily.

from xbee_explorer_serial.

Sorry one more thing. I remember we talked about moving the 5-16V silk closer to the barrel jack. I think it would make more sense to have it to the left side of the connector. It could probably stay the same size, just rotated. Or shrink it down, your call. Other than that this thing looks great. thanks!

from xbee_explorer_serial.

Moved and rotated.

from xbee_explorer_serial.

Hey Toni, I was just laying out the testbed and I need a little more space in between the RTS and CTS testpoints. As they sit right now, the annular rings of the pogopin header holes overlap a tiny bit.

Could you please scoot the CTS TP down a grid space (0.05 inch)?

from xbee_explorer_serial.

Moved.

from xbee_explorer_serial.