spaghetti- / pam-touchid Goto Github PK

This module allows us to authenticate services via touch-id using Apple's LocalAuthentication API. I am using the module to authenticate sudo as it's something we run frequently. The module can be dropped in to authenticate any other PAM enabled service as well.

NOTE: Apple has added its own pam touch-id module to the OS and you should use that. Please see: https://news.ycombinator.com/item?id=26302139

Compile this module as the user who has touchid active. Otherwise manually edit the user id's inside the .m file.

make all

The compiled module must be installed to /usr/lib/pam which is a system directory protected by System Integrity Protection (SIP). To install the module you have to disable this (no worries, it can be enabled later).

Reboot while holding Command-R, go into the recovery mode and spawn a new shell. In the shell run

csrutil disable

Reboot, copy the module over by doing sudo cp pam_touchid.so /usr/lib/pam/

Next, add this line to the top of /etc/pam.d/sudo

auth       sufficient     pam_touchid.so

This also allows fallback to standard password authentication if your finger fails.

Reboot back into recovery to enable SIP again

csrutil enable

Here's what shows on the touchbar when you try to sudo with the module installed